Chimney damper replacement for Crawford homes
A seized or warped damper in Crawford freed, rehung or replaced by local family damper pros, after a free inspection.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Damper specialists who find the failed part first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
When a top seal is the better answer for your Crawford fireplace, we say so and price it.
- Free inspection and estimateYour Crawford damper is run through its full travel and checked with a light at no charge.
- 100% satisfaction guaranteedIf the repaired damper does not open fully and close flat, we come back and make it right.
- Family owned and operatedA family business does the diagnosis and the repair, so the person who quoted it answers for it.
Smoke that rolls out of the opening
Smoke rolling out from the first match can come from a damper that stops partway. The plate looks open from below, yet it stops short of its full travel, so the passage above the fire is smaller than the flue it feeds.
We measure how far the plate actually opens and compare it with the throat. A bent stop, a warped plate or a crank that runs out of thread can each hold it short. Once the plate swings all the way back, the smoke usually goes where it should. Fireplace smoking in Crawford? Call (904) 920-5495 and our damper specialists will test it for free.
Crawford is part of Nassau County. The coastline lies beyond Crawford.
Damper repairs we handle in Crawford
- Seized plates freed and pivots worked loose
- Broken handle links and rivets reconnected
- Poker rods and notch brackets renewed
- Full travel and seal tested with a light
How our damper pros fix a damper in Crawford
-
Handle and plate tested
With the fireplace cold, the control is worked through its travel and the plate checked from below with a light.
-
Failed part named
Pivots, plate, frame or control, the part that failed is written down with the repair options and prices.
-
Freed, rehung or replaced
Sound parts are cleaned and freed, a plate is matched to its frame, or a new damper is set at code height.
-
Travel and seal confirmed
The plate must open fully and close flat under the light before the job is done.
Old dampers in Crawford fireplaces
Damper wear depends on the fireplace's age and use rather than the town. A frame that has been heated for many seasons shows it in pivot wear and small cracks.
We grade the frame on every Crawford visit so you know whether a new plate is worth fitting to it.
10% off any service booked within 72 hours of inspection
The damper visit in Crawford costs nothing, and a repair booked in the 72 hours after it is 10% off.
Freeing rusted pivots without cracking the frame
The pivots are the short pins the plate turns on, riding in lugs cast into the frame. Rust grows in that joint until the plate will not move, and the temptation is to hit the handle. A cast frame does not bend under a blow. It cracks.
We work the joint instead. The seat is scraped clean, the pivots get a penetrating treatment and time to soak, and the plate is rocked in short strokes until the travel comes back. Once it moves, the pivots are checked for thinning, since a pin that has lost much of its metal can shear the next season and drop the plate.
Cleaning the seat the plate closes on
The seal forms where the plate lands on the frame's lip, and that lip collects rust scale and soot crust. A few layers of scale are enough to hold the plate off its seat, so a sound plate can leak like a warped one.
Cleaning the seat back to metal is part of every damper visit. We scrape and brush the lip, clear the corners where scale gathers, and close the plate again with a light below to see whether the gap has gone. If it has, the plate stays. If the gap stays after a clean seat, the plate or the frame has lost its shape.
When a top seal beats a new throat damper
Mounted on the last flue tile, a top-sealing damper closes with a lid held shut by a cable anchored inside the firebox. It avoids cutting a rusted frame out of the throat, and many models close on a gasket.
It is a separate job with its own parts, and it suits some chimneys better than others, depending on the flue top and how the fireplace is used. When a throat damper replacement would disturb a lot of masonry, we price the top seal beside it so you can compare. The old throat plate is then fixed open or removed, as the top damper's maker directs.
What we measure on dampers in Crawford
- Full travel measured, with where the plate stops and why
- Seat cleaned back to metal and the seal checked under a light
- Replacement plate matched by frame size, pivot style and handle lug
- Any damper clamp for a decorative appliance recorded and left in place
Before a damper part is ordered
Do you repair fireplace dampers in Crawford?
Yes. Our crew frees, rehangs and replaces throat dampers across Nassau County, Crawford included. Describe what the handle does when you call, and the right parts come along to the free inspection.
What does the damper visit in Crawford cost me?
The inspection is free, and the repair is priced in writing before any work. Book the damper job within 72 hours of that inspection and 10% comes off as well.
More services in Crawford
-
-
-
-
-
-
Learn more about chimney damper repair and replacementAll services in Crawford
A damper that seals tight in Crawford
Fireplace smoking or drafty in Crawford? Book a free damper inspection, and the repair is 10% off if you go ahead within 72 hours.
Free Inspection