Direct vent gas insert installation in Clay Hill
A sealed gas insert for your Clay Hill fireplace, installed to its listing after a free inspection of the opening, the flue and the mantel.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local gas insert specialists who install to the listing
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
A gas insert in Clay Hill goes in only after the opening has been measured against its rating plate.
- Free inspection and estimateThe opening, flue and mantel of your Clay Hill fireplace are measured against the insert's plate at no charge.
- Upfront pricing, no hidden feesInsert, vent kit, surround, cleaning and repairs are priced line by line, and the gas and power trades are named.
- 100% satisfaction guaranteedIf the insert does not light, burn or seal the way its manual describes after our installation, we come back.
The surround and the finish around it
Once an insert is in, its surround panels close the gap to the fireplace face, and the face itself often gets updated at the same time. What goes around the opening has to suit the heat and the insert's instructions.
The face is measured before the surround size is ordered, and planned materials are checked against the manual before a finisher starts. Tile and stone usually suit; wood near the opening usually does not. Updating the fireplace face along with a gas insert in Clay Hill? Plan the finish with us at (904) 920-5495.
Clay Hill falls within Clay County. Clay Hill is an inland community.
Liners, surround, gas and power
- Chimneys cleaned before any gas appliance connects
- Power-outage behavior explained before you buy
- A first light with you at your Clay Hill home
- Model and vent kit recorded for your Clay Hill house
How our gas insert pros install an insert in Clay Hill
-
Measure against the plate
Opening, flue and mantel are checked against the insert's rating plate and manual.
-
Clean and check the chimney
The old flue is cleaned, examined and repaired if needed before the liners go up.
-
Liners, insert, surround
The vent kit runs to its termination, the insert is set and the surround fitted.
-
Hookups and first light
The gas and electrical hookups are made, then we light and test the insert with you.
Yearly service inland in Clay Hill
Well inland, a gas insert in Clay Hill still needs its yearly inspection: burner, liners, termination and glass seal.
We can set that up on install day.
10% off any service booked within 72 hours of inspection
Gas inserts are larger jobs, and the 10% discount covers the whole install.
Cleaning a chimney that burned wood
Before a gas appliance connects, section 503.5.6 of the state fuel gas code has the chimney passage checked to be clear and cleaned if it once vented solid or liquid fuel. A fireplace that burned wood falls squarely under that rule.
So every gas insert installation in an old wood fireplace starts with cleaning and a look at the flue. What we find, a cracked flue lining, loose debris or missing parging above the throat, is written down before the liners go in and hide it. The findings are priced separately from the insert.
Sizing the surround
A gas insert's surround panels come in set sizes, chosen to cover the gap between the insert and the edges of the fireplace opening. Too small and the gap shows; too large and the panels may not sit flat on an uneven face.
We measure the face as well as the opening, including any brick that bows out or a hearth that sits high, and order the surround to suit. Where the face is uneven, the estimate says how the panels will be fitted. The surround is also what gets taken off for service, so it is set to come away cleanly.
What happens in a power cut
Outages affect gas inserts in different ways. One maker's system lets batteries in the receiver control the flame height and turn the insert on and off during an outage, while the blower and night light stay off until power returns.
Other models with standing pilots can light without house power at all, and some cannot run without it. If heat during an outage is part of why you want an insert, we check how the model behaves before you buy it, and show you where any backup batteries go on install day. Spare batteries kept in a drawer near the fireplace save a cold evening.
Measured in Clay Hill before a gas insert is ordered
- Inside flue size and route checked for the liners
- Liner bend radius kept through the throat and smoke shelf
- Termination and flashing at the chimney top, with the top checked first
- Model, vent kit and liner sizes recorded on the ticket
Before you switch to gas
What is co-linear venting?
Two flexible liners run up the old flue, one bringing outdoor air in and one taking exhaust out. They join the insert at the bottom and a termination at the top.
Can I keep my mantel?
Yes, when its height suits its depth under the insert's figures. Otherwise the choice is another model, a higher mantel or a noncombustible one, settled before ordering.
More services in Clay Hill
-
-
-
-
-
-
Learn more about gas fireplace insert installationAll services in Clay Hill
Gas insert questions, free visit
Gas inserts we fit in Clay Hill follow their manuals line by line, and our satisfaction guarantee covers the result.
Free Inspection