Family-run chimney tuckpointing in Clay Hill
Recessed or crumbling mortar at your Clay Hill chimney repointed before it lets water into the brick, free inspection first.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Family-owned mortar specialists serving Clay Hill
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
If a joint we repointed in Clay Hill lets go, the same family crew returns to fix it.
- Free inspection and estimateEvery face of your Clay Hill chimney is scratch-tested and sketched at no charge.
- 100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
- Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.
Joints that open after a storm
Heavy wind and rain do not usually strip sound mortar, but they can finish off joints that were already weak. After a storm, loose mortar crumbs on the roof or a fresh gap in a joint are worth checking. Nothing on the sketch is priced by guesswork, since each face was checked at arm's length.
We look for the joints that failed and the ones about to, since weak mortar rarely fails alone. Repointing them before the next storm keeps water out of the brick. Mortar gone from your Clay Hill chimney after bad weather? Phone (904) 920-5495; our masons inspect it for free.
Clay Hill lies within Clay County. Clay Hill sits away from the coastline.
What chimney tuckpointing covers in Clay Hill
- Every face scratch-tested and sketched
- Joints tooled to match and shed water
- Old caulk and skim patches cut out
- Fresh work shaded, misted and covered from rain
From the scratch test to cured joints in Clay Hill
-
Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
-
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
-
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
-
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.
Sun-facing sides in Clay Hill
The side of a chimney that bakes in afternoon sun dries fast, and fresh mortar there needs shading and misting to cure well.
On repointing jobs in Clay Hill we time the work on that face for the gentler part of the day.
10% off any service booked within 72 hours of inspection
For a home in Clay Hill with several faces to repoint, every face booked in the 72 hours is discounted.
Curing new joints slowly
Fresh mortar gains strength by curing, and it cures best when it dries slowly. Hot sun, wind and dry brick all pull water out too fast, leaving a weak, powdery surface.
Preservation Brief 2 describes keeping new work damp while it cures. We shade and mist fresh joints as needed and time the work to avoid the harshest part of the day on sun-facing sides. The estimate tells you how long to wait before the chimney is used, based on the mortar and the weather while we work. Curing is not dramatic work, yet it separates joints that stay hard from joints that dust away within a few seasons.
Spalled bricks come out before the joints
Repointing restores joints, not bricks. A brick whose face has flaked off, or one cracked through, has to be replaced before the joints around it are finished, because the new joint needs a sound brick on each side.
Brick replacement is its own job and is priced as its own line. When we find damaged bricks during the survey, the sketch marks them, and they are replaced first so the repointing that follows can tie them into the wall. The reverse order would mean raking fresh joints a second time. Each replaced brick is set in mortar of the same type chosen for the repointing, so the wall stays consistent.
Mortar inside the house and attic
The exterior of a chimney gets the attention, but the section inside the house and attic has mortar joints too. There, a failed joint is not only a cosmetic issue, since the chimney wall sits close to the framing.
Where the chimney is visible in the attic or a closet, we check those joints with a light. Sandy or open joints on the interior are repointed with the same care as outside, with the space protected from dust. They are listed separately on the estimate because the access and cleanup are different. Any joint there that looks scorched or blackened is noted for a flue check as well, since it may point to a leak from inside.
Joint findings written down before pricing
- Raking depth for each face, set by joint width
- Mortar type under ASTM C270 and the reason for it
- Roof protection, debris collection and gutter cleanup
- Days on site and the wait before the next fire
Repointing questions from Clay Hill
What if you find loose bricks while raking?
We stop and show you. A loose brick or course needs relaying or replacement, which is priced as its own item before we continue.
What does the repointing survey in Clay Hill cost?
The survey and estimate are free. Book the repointing within 72 hours of the survey and 10% comes off.
More services in Clay Hill
-
-
-
-
-
-
Learn more about chimney tuckpointingAll services in Clay Hill
Book a joint survey before the next storm
From a few top courses to the whole stack, repointing in Clay Hill is priced face by face before work begins.
Free Inspection