
Local chimney flashing repair in Callahan
Two layers of flashing, with the counter flashing let into the brick rather than glued on, rebuilt at your Callahan roof line after a free inspection.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Roof line specialists for flashing leaks in Callahan
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
The flashing metal is chosen to suit the roof and its fasteners, and it is named on your estimate.
- Free inspection and estimateThe flashing check in Callahan costs nothing, and it includes a look from the attic side.
- No hidden feesAny roofing we lift and reset is priced on the estimate, so the bill does not grow on the roof.
- Workmanship warrantyThe metal we fit and the joints we cut into the brick are covered by our workmanship warranty.
The uphill side of the chimney
Water and debris coming down the roof pile up against the uphill face of a chimney. The back pan there has to carry more water than any other piece of flashing, and it is the piece that ends up buried under leaves or patched with tar.
When the Callahan leak comes from the uphill side, we clear the debris, check how far the back pan runs up under the roofing, and measure the chimney's width against the roof slope. That tells us whether a longer back pan will do, or whether the chimney is wide enough that the building code wants a cricket. Tell us whether your Callahan roof is shingle, tile or metal when you call (904) 920-5495.
At the 2020 Census, Callahan was home to 1,526 people. Callahan sits inland, more than about six miles from the coast.
What's Included
What reflashing covers on Callahan chimneys
- Apron laid over the roofing on the downhill face
- Back pan run up under the roofing on the uphill face
- Corner tabs folded so no seam is left open
- Cricket need checked on wide chimneys
How It Works
From attic check to sealed reglet in Callahan
-
Roof line checked, tar stripped
We look at every piece around the chimney, and old tar or caulk comes off so the metal under it can be judged.
-
Roofing lifted around the chimney
Shingles, tile or panels next to the chimney come up just far enough to reach the base flashing.
-
Base and counter flashing rebuilt
New step or base pieces go in under the roofing, and the counter flashing is set into a sawn joint in the brick and sealed.
-
Roofing reset over new metal
The roofing goes back down over the new flashing, and you see each piece that was replaced before we leave.
Local Conditions
Wide chimneys and crickets in Callahan
Water running down the roof piles up against the uphill face of a wide chimney. The residential code calls for a cricket there, a small ridge that splits the flow around the stack.
We check the width of your chimney in Callahan and say on the estimate whether a cricket is needed and who builds it.
10% off your first service when you book today
Reflashing booked today for your Callahan home comes with 10% off a first service.
Through-wall flashing when brick is being relaid
The detail the Brick Industry Association draws for chimneys runs the counter flashing through the full thickness of the chimney wall and turns it up into the air space inside, so water soaking into the brick above is collected and sent back out. Its guidance says flashing that stops short of going through a wythe is little better than none.
That detail can only be built while the brick is being laid. When a chimney is being rebuilt above the roof, it is the better option and we plan it into the rebuild. On an existing chimney that is staying, a reglet in a mortar joint is the practical repair.
Hemmed edges on the flashing
The exposed lower edge of counter flashing is folded back on itself, a hem, rather than left as a raw cut edge. The hem stiffens the metal so it lies flat against the base flashing instead of curling, and it gives water a clean edge to drip from.
A raw edge can ripple, lift in wind and let water wick back underneath. On aprons and counter flashing we hem the exposed edges where the metal allows it. It is a small thing that makes the joint last longer and look finished from the ground. Hems are formed on the bench before the piece goes up.
Checking the flashing from inside the attic
From the attic, with a light, we can see the underside of the roof deck around the chimney. Daylight showing through at the chimney edge, dark staining or soft wood on one side, or water trails on the rafters all point to specific pieces of flashing.
We also check that the roof deck stops short of the chimney with the clearance the chimney needs, rather than being jammed against the brick. The attic check is repeated after the first heavy rain following the repair, as the simplest confirmation that the new flashing is doing its job. Any wet insulation found against the chimney is pulled back to dry.
Free Inspection
What decides the flashing detail
- Failed pieces identified by side: apron, steps, back pan or corners
- Roof covering type, and the maker's or manual's flashing detail
- Counter flashing method, reglet or through-wall, with the reason
- Temporary cover for the joint if weather interrupts the work
FAQ
Flashing questions from Callahan
Will the new flashing match my roof?
The flashing is detailed to your roof type, and the roofing around it goes back as it was where it can be lifted and reset. Broken tile or discontinued shingle may need close matches, and we flag that before any roofing comes up.
Is flashing work eligible for the 10% off?
Yes. The 10% off your first service covers flashing repair too. Mention it when you book.
Our Services
More services in Callahan
-
Fireplace Repair and Service Firebox, damper, hearth, surround and smoke problems on any fireplace.
-
Chimney Rebuild Loose, cracked or leaning masonry taken down to sound brick and relaid.
-
Chimney Cap Installation and Replacement Rain, animals and embers kept out of the flue by a fitted cap.
-
Chimney Waterproofing Brick that soaks up rain treated with a breathable repellent.
-
Chimney Leak Repair Water coming in at the chimney, traced by testing and stopped where it enters.
-
Chimney Liner Installation and Relining A listed stainless liner sized to the appliance and run the full flue height.
Learn more about chimney flashing repairAll services in Callahan
Book a flashing check
A stain on the ceiling beside the chimney is often the first clue. Call (904) 920-5495 and our flashing experts trace it on your roof line in Callahan.
Free Inspection