Family-owned storm damage chimney repair in Bellair-Meadowbrook Terrace
Water coming in around the chimney after wind-driven rain in Bellair-Meadowbrook Terrace? We trace it from the top down and stop it.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local chimney pros who make it safe first in Bellair-Meadowbrook Terrace
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Temporary and permanent work are written as separate lines you approve one at a time.
- Free inspection and estimateAfter a storm, your chimney in Bellair-Meadowbrook Terrace is checked from the top down at no charge.
- 24/7 emergency lineThe 24/7 line is answered when the storm damage cannot wait for business hours.
- 100% satisfaction guaranteedIf a permanent repair we made does not hold the way we said, we come back and fix it.
A spark screen torn or blown away
The screen on a chimney cap keeps sparks in and animals out. Wind and flying debris can tear it or pull it loose, and a torn screen is an open door for nesting birds and squirrels the week after a storm. A screen hanging loose can also rattle against the cap and wear through it.
We replace damaged screens and caps in Bellair-Meadowbrook Terrace with ones that meet the spark arrestor rules in the code and fit the flue. The estimate lists whether the whole cap or only the screen needs replacing.
Bellair-Meadowbrook Terrace lies within Clay County. At the 2020 Census, Bellair-Meadowbrook Terrace was home to 14,482 people.
From a lost cap to rebuilt top courses
- Chase tops refabricated and refastened
- Damaged flue tiles found and written up
- Torn spark screens replaced to code
- Antenna and dish mounts taken off the chimney
From the first call after the storm to the last repair in Bellair-Meadowbrook Terrace
-
Hazards first, then the call
Utility and 911 hazards come first. Then describe what you see from the ground and we set the visit.
-
Top closed to the weather
An open flue, a broken chase top or loose courses are covered or made stable the same visit where safe.
-
Chimney checked top to bottom
Cap, crown, flashing, masonry and every flue are checked, and each finding is written down in order.
-
Permanent repairs in dry weather
Water-stopping work goes first, then structure, then finishes, each on its own line.
Loose top courses inland in Bellair-Meadowbrook Terrace
The top courses of a chimney take the most wind, and in Bellair-Meadowbrook Terrace, as anywhere, tired mortar there lets bricks loosen in a storm.
We take the loose courses down to firm brick and relay them, priced per course.
10% off any service booked within 72 hours of inspection
Storm repairs in Bellair-Meadowbrook Terrace are 10% off when booked within 72 hours of the inspection.
Water first, structure second, finishes last
A storm repair is sequenced by what the water is doing. Anything that lets rain into the chimney or the house is dealt with first, even if only temporarily. Then come the structural parts: loose courses, a cracked crown, shifted flue tiles. Finishes, stains and cosmetic work come last.
That order keeps the damage from growing while the permanent work is scheduled. It is also how we write the estimate, so you can see what has to happen this week and what can be planned around the weather. Where money or time is limited, the first group is the part not to postpone.
Large caps over several flues
A cap that covers several flues at once is a big, flat surface in the wind. It has to be anchored to the crown or the brick with fasteners suited to masonry, spaced as its maker directs, and the crown under it has to be sound enough to hold them.
When a multi-flue cap has been lifted or bent, we check the crown and the anchors before refitting or replacing it. A cap reset on a cracked crown is loose again after the next storm. Where the crown cannot hold anchors, recasting it comes first, and the cap goes back on the new crown.
Spark arrestor rules for a new cap
R1003.9.2 sets the rules for a spark screen on a masonry chimney: a free area of four times the flue outlet or more, a screen whose heat and corrosion resistance equals 19-gauge galvanized steel, or stainless at 24 gauge, openings that pass a 3/8 inch sphere but stop a 1/2 inch one, and access for cleaning.
A storm-damaged screen is replaced with one that meets those rules and fits the flue. The screen size and metal go on the ticket. A screen with openings smaller than the rule allows clogs with soot and restricts the draft, so the size is checked too.
Temporary and permanent, line by line
- Cap sized to the flue and fastened as its maker directs
- Top courses that shifted, relaid and priced per course
- Counter flashing reset into a cut joint and sealed
- Factory-built parts ordered by model from the listed system
Storm damage questions from Bellair-Meadowbrook Terrace
Is the roofing around the chimney part of your repair?
We handle the flashing that belongs to the chimney. Damaged roofing itself is a roofer's work, and we coordinate so the two are done in the right order.
What if my chimney also vents a water heater?
That flue cannot be covered while the appliance runs. We check it separately and tell you whether the appliance is safe to use.
More services in Bellair-Meadowbrook Terrace
-
-
-
-
-
-
Learn more about hurricane and storm damage chimney repairAll services in Bellair-Meadowbrook Terrace
Storm-damaged chimney repair in Bellair-Meadowbrook Terrace, start to finish
After a free storm inspection in Bellair-Meadowbrook Terrace, the repair comes 10% off if you book it within 72 hours.
Free Inspection