Family-run fireplace damper replacement in Bellair-Meadowbrook Terrace

New plates, new frames and new handles for Bellair-Meadowbrook Terrace fireplaces, priced upfront after a free look from below with a light.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Family-owned damper experts serving Bellair-Meadowbrook Terrace

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Handle positions are left clearly marked, so the next fire in Bellair-Meadowbrook Terrace starts with the damper open.

Free inspection and estimateYour Bellair-Meadowbrook Terrace damper is run through its full travel and checked with a light at no charge.
100% satisfaction guaranteedIf the repaired damper does not open fully and close flat, we come back and make it right.
Family owned and operatedA family business does the diagnosis and the repair, so the person who quoted it answers for it.

Call (904) 920-5495 Free Inspection

A plate lying on the smoke shelf

Sometimes the damper is not stuck. It is gone from its frame. Pivots that rusted thin can snap, and the plate falls back onto the ledge behind the throat, leaving the flue open for good. From the room, the handle feels loose and a light shows sky instead of metal.

A fallen plate can often be retrieved, but it rarely goes back on the same pivots. We check whether the frame still has sound lugs for a new plate or whether the whole damper has to be replaced. Damper plate missing from its frame in Bellair-Meadowbrook Terrace? Call (904) 920-5495 for a free inspection and a written price.

At the 2020 Census, Bellair-Meadowbrook Terrace was home to 14,482 people. Bellair-Meadowbrook Terrace sits away from the coastline.

Plate, frame, pivots and control

Seized plates freed and pivots worked loose
Poker rods and notch brackets renewed
Debris cleared off the smoke shelf behind the plate
Damper checked at your Bellair-Meadowbrook Terrace home with the fireplace cold

Call (904) 920-5495 Free Inspection

From the first light test to a sealed plate in Bellair-Meadowbrook Terrace

Handle and plate tested
With the fireplace cold, the control is worked through its travel and the plate checked from below with a light.
Failed part named
Pivots, plate, frame or control, the part that failed is written down with the repair options and prices.
Freed, rehung or replaced
Sound parts are cleaned and freed, a plate is matched to its frame, or a new damper is set at code height.
Travel and seal confirmed
The plate must open fully and close flat under the light before the job is done.

A damper that drops shut in Bellair-Meadowbrook Terrace

Worn notches on a poker rod let the plate slide closed on its own weight. That has nothing to do with location and everything to do with wear.

In Bellair-Meadowbrook Terrace we replace the rod or bracket so the damper holds open through the whole fire.

10% off any service booked within 72 hours of inspection

Damper stuck or leaking air? Book the fix up to 72 hours after the inspection and save 10%.

Call (904) 920-5495 Free Inspection

How tight a throat damper can close

Plate meets frame metal to metal in a throat damper, with no gasket between them. Even a new one lets some air past, and it was not designed to be airtight. What it can do is keep a large open flue from drawing steadily on the room.

Dampers at the top of the flue work differently. Many close on a gasket and seal more closely, which is one reason people choose them when a throat damper has failed. We tell you plainly what each can deliver, so a repaired throat damper is judged against what it was built to do, not against a gasketed seal.

The clamp that keeps a damper open

A vented decorative gas appliance set into a wood-burning firebox is listed under ANSI Z21.60, and its installation instructions require the damper to stay open to a minimum area whenever the appliance is installed. A metal clamp or stop fastened to the damper does that job.

That clamp stays in place while the appliance is installed, even when a customer asks for a damper that closes. If the fireplace is going back to wood, the appliance comes out first, and then the clamp can be taken off and the damper tested through its full travel. The estimate records which of those two situations applies.

Heat cracks in cast damper frames

Cast iron is strong but brittle. A frame that has been heated and cooled for years, or struck while seized, can crack at a corner or beside a lug. A hairline crack away from the lugs and the seat may be stable, and we note it to watch.

A crack through a lug, or one that has opened so the seat is no longer flat, ends the frame's service. Plates cannot hang true on a split lug. The repair is a new damper set in the throat or a top seal instead, and the estimate shows the crack's position so you can see why.

Damper findings written down before pricing

Control checked: poker rod, notch bracket or rotary crank and gear
Seat cleaned back to metal and the seal checked under a light
Handle positions marked so open and closed are clear
Whether the fireplace can be used while a part is ordered

Damper questions from Bellair-Meadowbrook Terrace homeowners

Can a rusted damper be saved?

Often, when the rust is on the surface and the pivots still have their metal. A plate that has thinned, holed or warped is replaced. We grade it on the visit and show you what we found.

Can I still use my fireplace with a broken damper?

Only if the plate is secured fully open. A plate stuck closed or partly closed can push smoke back at you, so leave the fireplace cold until it is fixed.