Top sealing dampers installed for Bellair-Meadowbrook Terrace fireplaces
Throat damper rusted or leaking in Bellair-Meadowbrook Terrace? We fit a gasketed damper at the top of the flue after a free inspection.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Top sealing damper specialists in Bellair-Meadowbrook Terrace
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The lid is adjusted until it closes evenly on its gasket.
- Free inspection and estimateYour flue tile in Bellair-Meadowbrook Terrace is measured and the crown checked on a free visit before any damper is ordered.
- Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
- 100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.
A spring that will not lift the lid
A spring lifts the lid of a top sealing damper, and the cable pulls it down. A spring that has rusted, lost tension or come off its mount leaves the lid half open, which spoils the draft of the next fire. A lid stuck halfway also catches rain and debris without sealing anything.
We replace springs and hinge parts on top dampers in Bellair-Meadowbrook Terrace with the maker's parts, check that the lid opens fully when the cable is released, and show you how to confirm that before lighting.
Bellair-Meadowbrook Terrace is part of Clay County. Bellair-Meadowbrook Terrace had 14,482 residents at the 2020 Census.
What our crew fits and fixes at the flue top in Bellair-Meadowbrook Terrace
- Top sealing dampers set in the maker's adhesive
- Old throat dampers removed or fixed open
- Lids adjusted to seal on their gaskets
- Your Bellair-Meadowbrook Terrace chimney's tile and crown checked first
How our crew fits a top damper in Bellair-Meadowbrook Terrace
-
Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
-
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
-
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
-
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.
Sweeping schedules inland in Bellair-Meadowbrook Terrace
Fitting a damper does not change the yearly inspection NFPA 211 calls for. In Bellair-Meadowbrook Terrace, the flue is still checked, and swept when it needs it, with the lid open.
The gasket, spring and cable get looked at on the same visit.
10% off any service booked within 72 hours of inspection
Two quotes for a top damper? You have 72 hours to compare them and still take 10% off.
A sound tile to bond to
The adhesive that holds the frame bonds to the top of the flue tile. A tile with cracks near the top, a chipped rim or a loose section will not hold the frame, and the damper can shift or lift in wind.
We clean the tile rim and check it closely before fitting. Damaged tile at the top is repaired or replaced first, and that work is priced as its own line so you can see why it is needed. A tile that is sound but stained is cleaned back to firm material where the bead will run.
Mounting the handle bracket
Inside the firebox, the handle bracket goes on a side wall near the front where the brick allows. It is anchored into firebrick or masonry with fasteners suited to it, at a height you can reach without leaning into the firebox.
The bracket also carries the lock that holds the lid shut. We place it where it will not sit in the flames and where the chain or handle is easy to see before lighting. You approve the spot before we drill. The bracket is set level and square to the opening, so the handle hangs straight and is plain to see.
Sweeping with a top damper in place
The flue under a top damper is swept with the lid open, following the damper maker's instructions. Some models let a brush pass through the open lid from above, and others are swept from below.
Brushing too hard at the top can damage the gasket or bend the lid, so the sweep works around them. After the sweep, the lid is closed, checked against its gasket and the cable adjustment confirmed. A sweep who knows the damper is there also knows not to force a brush through a half-open lid.
What we check before fitting a top damper in Bellair-Meadowbrook Terrace
- Cable routed clear of tile joints and old damper edges
- Handle bracket anchored in the firebox where you approve
- Lid adjusted to close evenly on its gasket
- Round flue or liner top matched with the maker's adapter
Before the damper is ordered
Can you fit a top damper the same day in Bellair-Meadowbrook Terrace?
The measurement can happen the same day when the schedule has room, but the damper is ordered to fit your tile. We install it once it arrives, and the adhesive then needs its set time.
Will it need maintenance?
Very little. The gasket, spring and cable are checked when the chimney is swept, and the maker's parts replace them when they wear.
More services in Bellair-Meadowbrook Terrace
-
-
-
-
-
-
Learn more about top-sealing damper installationAll services in Bellair-Meadowbrook Terrace
Rusted throat damper in Bellair-Meadowbrook Terrace?
Top dampers in Bellair-Meadowbrook Terrace are fitted by a local, family-owned crew and covered by our 100% satisfaction guarantee.
Free Inspection