Local fireplace repair in Bellair-Meadowbrook Terrace

Getting a fireplace in Bellair-Meadowbrook Terrace back in use starts with a free check of the firebox, the damper and a test fire.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Fireplace specialists who fix the part that failed

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Firebox joints get refractory mortar, because ordinary mortar breaks down under the heat of a fire.

Locally ownedA locally owned business shows you the failing part of your Bellair-Meadowbrook Terrace fireplace before any price.
Upfront pricing, no hidden feesSafety repairs come first on the estimate, and items that can wait are priced on their own lines.
100% satisfaction guaranteedIf the fireplace still smokes or sticks after the repair we quoted for it, we come back.

Call (904) 920-5495 Free Inspection

Masonry or factory-built, settled at the start

Two fireplaces that look alike from across the room can be built in entirely different ways. One is brick and firebrick laid on site. The other is a steel box with molded panels, a rating plate and a chimney pipe tested with it. Which one sits in your Bellair-Meadowbrook Terrace living room decides where the parts come from and which document the repair follows: the building code for masonry, the maker's listing for factory-built. We settle that in the first minutes of the visit and record it, so anyone who works on the fireplace later starts from the same page. Masonry or metal? Knowing which your Bellair-Meadowbrook Terrace fireplace is helps, so say so on the call to (904) 920-5495.

The 2020 Census counted 14,482 residents in Bellair-Meadowbrook Terrace. Bellair-Meadowbrook Terrace sits away from the coastline.

What fireplace repair covers in Bellair-Meadowbrook Terrace

Cracked firebrick cut out and replaced brick by brick
Damper plate, pivot and handle worked and repaired
Hearth extension measured against the opening
Rusted lintel over the opening checked for movement

Call (904) 920-5495 Free Inspection

From test fire to finished repair in Bellair-Meadowbrook Terrace

Type and rating plate read
We settle whether the fireplace is masonry or factory-built and read the model where there is one.
Joints, damper and hearth checked
Joints are probed, the damper worked through its travel, and the hearth and trim measured.
Repair with the right materials
Refractory mortar and firebrick for masonry, the maker's parts for factory-built units.
Test fire and cleanup
Where smoke was the problem, a short test fire checks the fix, and the room is cleaned before we go.

Tight houses and fireplaces in Bellair-Meadowbrook Terrace

Kitchen hoods, bath fans and a clothes dryer can pull more air out of a house than leaks back in. The fireplace becomes the way outside air comes back, and it brings smoke with it.

We check the house pressure during a repair visit in Bellair-Meadowbrook Terrace and explain what helps.

10% off any service booked within 72 hours of inspection

Smoky or stuck fireplace? Save 10% on the repair by booking it no later than 72 hours after we inspect.

Call (904) 920-5495 Free Inspection

Reading a crack in a refractory panel

Refractory panels in a factory-built fireplace are cast pieces held in a steel firebox, and fine surface cracking from heat is expected in them. The maker's manual draws the line, by crack width, by gaps opening between pieces, or by any piece that has loosened or fallen away.

Once a panel has broken through and the steel behind it is exposed to the fire, the unit should not be used until the panel is replaced. We measure what is there against the manual. Each panel is listed by its position and the maker's part number, and panels are replaced as a set when the manual calls for it.

A hearth slab that has dropped

A hearth that has cracked straight across, with one side sitting lower than the other, has lost support underneath. The code calls for masonry hearths to be supported by noncombustible materials and reinforced to carry their own weight and the loads on them, and a slab set on wood framing or without enough reinforcement can settle. The repair starts below the surface. We check what the slab sits on before pricing anything, because resetting tile on a slab that is still moving produces the same crack again. When the support is the problem, the slab gets priced instead of the tile.

Soot on the brick above the opening

A dark fan of soot on the brick above the opening is a record of smoke spilling out of the fireplace. Cleaning it off is easy, but the stain comes back unless the cause is found. The shape helps. Staining across the full width of the opening points to an opening too tall for its draft, while staining on one side can point to a damper that opens unevenly or a fire built off center. We read the stain, run a test fire to confirm, and the fix for the cause comes with cleaning the face with a cleaner that suits the brick or stone.

Parts, materials and safety items on paper

Damper plate, pivot and handle freed, adjusted or replaced
Mantel and trim distances taken from the edge of the opening
Smoke guard sized to lower an opening that is too tall
Loose hearth tile lifted and reset on a sound noncombustible base

Fireplace repair questions from Bellair-Meadowbrook Terrace

Does the 10% off cover fireplace repair?

It does. A fireplace repair booked within 72 hours of the inspection is 10% off, shown as its own line on the written estimate.

Do you look at gas logs in a wood fireplace?

Yes. The fireplace around the logs gets the same repair visit, and we check that the damper is held open as the log set's instructions require. Faults in the burner or controls are handled as gas fireplace work.