Local fireplace restoration in Baldwin

An unused fireplace in Baldwin restored to working order, with the drying time before the first fire written down.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local restoration pros who keep the original look

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The face is cleaned only after a trial patch you have seen dry.

Family owned and operatedA family business plans your Baldwin fireplace as one job, so each step happens once and in the right order.
100% satisfaction guaranteedYou approve the trial patch and the mortar sample before the face is touched, and our guarantee covers the result.

Call (904) 920-5495 Free Inspection

Restoring rather than rebuilding

Old fireplaces are sometimes quoted for a full rebuild when most of the masonry is sound. Restoration keeps the sound parts, repairs the failed ones and leaves the original brick in place, which is often what gives the room its character in the first place.

We write down which parts are sound and which are not, so you can see how much of the fireplace is being kept, and any section that has to be rebuilt is matched to the rest. Quoted a rebuild for the fireplace in Baldwin? Get a second look free at (904) 920-5495.

Baldwin had 1,396 residents at the 2020 Census. The coastline lies beyond Baldwin.

What fireplace restoration covers in Baldwin

Worn or damaged face brick replaced with matched units
Mantel and trim distances checked against the code
Hearth condition and size recorded
Stone fireplace faces cleaned and repointed

Call (904) 920-5495 Free Inspection

How fireplace restoration runs

Clean and assess
Everything from the hearth to the flue top is cleaned, then checked and written up part by part.
Heat side first
Firebox, parging and damper repairs are made in refractory materials and left to dry.
Trial, then the face
A trial patch is cleaned and a mortar sample made for your approval before the face work.
Repoint, cure, clean
Face joints are repointed in layers, left to harden, then the face gets its final cleaning.

Earlier patches in Baldwin homes

Many old fireplaces in Baldwin have been patched over the years with whatever mortar was at hand. Those patches can be harder than the brick and a different color.

Restoration cuts them out and repoints to match.

10% off any service booked within 72 hours of inspection

Bringing an old fireplace back? Work you commit to inside 72 hours of our look is 10% off.

Call (904) 920-5495 Free Inspection

Heat-side repairs use refractory materials

Inside the firebox and the smoke chamber, the building code sets the materials. Firebrick goes into C199 medium-duty refractory mortar, the class R1001.5 names, and firebox joints stay at a quarter inch or less.

The same mortar class is required for smoke chamber parging. Restoration uses those materials on the heat side even where the original builder did not, because they are what hold up to the fire. The ordinary mortars used on the face have no place inside the firebox, and the estimate names the refractory product separately from the face mortar so the two stay apart on site.

Hand tools on old joints

Hand chisels and a small hammer are the traditional way to take out old mortar, and the National Park Service guidance calls them the least damaging method for historic masonry. Power saws and grinders are faster, but on thin brick joints they tend to chip the brick edges and overcut the vertical joints.

Chipped edges make a joint look wider than it was, and no amount of careful mortar hides that afterward. On an old fireplace face we cut by hand, and any power tool is limited to places where it cannot touch the brick edges. It takes longer, and the estimate reflects that honestly.

The hearth extension on an old fireplace

For a masonry fireplace, today's code wants the hearth extension to run 16 inches into the room and 8 inches past both sides of the opening, rising to 20 and 12 inches once the opening reaches 6 square feet.

Older fireplaces were not all built to those figures. Restoration measures the hearth against them and notes any shortfall, along with cracks or loose edges. Hearth work is priced as its own line, in material matched to the original where it can be found, so you decide on it separately from the rest of the fireplace.

Cleaned and checked in Baldwin before a plan is priced

Safety repairs listed apart from appearance work
Firebox joints and firebrick in C199 refractory mortar
Floors, mantel and walls protected, rinse water contained
Order of work and drying times written on the estimate

Before an old fireplace is brought back

Can you restore an old fireplace in Baldwin without changing how it looks?

Yes. Restoration keeps the original brick or stone, the size of the opening and the joint pattern. Changing the facing or surround is remodeling, which we do not do.

Is the restoration inspection free?

Yes. The inspection and the written estimate cost nothing, with upfront pricing and no hidden fees. Booked within 72 hours of that inspection, the restoration is 10% off.