Chimney rebuild in Baldwin by local masonry pros
One free assessment for your Baldwin rebuild covers brick, mortar, flue, crown, flashing and permit.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Chimney rebuild specialists who test every course
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Every course is tested by hand, so the take-down stops at brick that holds.
- Family owned and operatedOur family business takes your Baldwin chimney down by hand and lays it back up itself.
- Upfront pricing, no hidden feesThe take-down line, flue plan and crown are priced before the first brick comes off.
- Workmanship warrantyFrom the new courses to the counterflashing, the rebuilt stack carries our workmanship warranty.
How a rebuild runs, day by day
The first day is protection and take-down: the roof covered around the stack, the fireplace sealed inside, and brick lowered by hand to the chosen line. Next comes the flue decision in practice, with tile set or space left for a liner, then the courses laid back up with flashing let in as they pass the roof.
The crown is cast last and left to cure before the cap goes on. Weather can stretch the middle days, and the Baldwin schedule shows which days need someone home. Mortar is mixed in small batches on the ground and carried up as needed. The take-down line for your Baldwin chimney is set on a free inspection; call (904) 920-5495.
Counted as a direct line, Jacksonville and Baldwin are roughly 23 miles apart. Baldwin sits in Duval County.
What's Included
Rebuild work around Baldwin
- Mortar type chosen from ASTM C270 for the exposure
- Counterflashing let into the new joints as the stack rises
- Take-down line for your Baldwin chimney stated in courses
- Work days and cure time for the Baldwin job in writing
How It Works
Test, take down, relay, crown
-
Take-down line marked
We test each row of brick from the top down and mark where sound brick starts.
-
Old brick taken down by hand
The flue is covered and the roof protected, then brick comes off a row at a time, with sound brick saved to relay.
-
Relaid plumb around the flue
Brick goes back in matched mortar with tooled joints, around new clay tile or ready for a listed liner, and is flashed into the roof.
-
Crown cast, cap on last
A new crown with an overhang and a drip edge cures before the cap goes on and the first fire is lit.
Local Conditions
Two flues in one rebuilt stack in Baldwin
Where two flues run in one chimney, the code wants a masonry divider at least 4 inches thick between them, so smoke and heat stay in their own flue.
A rebuild in Baldwin that opens both flues puts that divider back in full.
10% off your first service when you book today
Booking chimney rebuild in Baldwin today? Your first service with us is 10% off.
The bond break where the tile passes the crown
Flue tile heats faster and more than the crown around it. If concrete is placed tight against the tile, the tile's growth cracks the crown, and the crack lets water into the stack.
So the code asks for a caulked bond break at each flue liner, per ASTM C1283 and FBC R1003.9.1. In practice a compressible strip or a gap is left between tile and crown during the pour, then filled with a flexible sealant rated for heat and weather. That joint is checked at every later sweep, and a crown cracked in rings around its tile is a sign the break was left out.
Measuring the finished height
Before the crown is cast, the rebuilt stack's height is checked against FBC R1003.9: a minimum of 3 feet above its highest roof penetration, and a minimum of 2 feet above anything on the house inside a 10-foot circle.
The 10-foot measurement is taken around the chimney in every direction, including toward dormers, a steeper roof section or an addition. A tape and a level from the roof deck give the numbers; nothing is judged by eye.
If the old top was short, the extra courses go on before the crown is cast, so the new height is built in rather than added later. The measurement and the reference point used are recorded.
Protecting fresh mortar and concrete
New mortar and a cast crown gain strength slowly, and two things harm them early: rain that washes the surface before it sets, and drying so fast that the mix cannot cure. Both show later as crumbly joints or a crazed crown.
Fresh work is covered at the end of each day and whenever rain threatens, and the crown is kept damp as its data sheet directs. The schedule leaves room for those cure periods, which is why a rebuild does not finish on the day the last course is laid. Hot, windy days call for shade and damp burlap just as rainy ones call for covers.
Free Inspection
Take-down line, flue and crown plan
- Flue covered so brick and mortar chips stay out of the smoke chamber
- Sound original brick cleaned and set aside to relay
- Cricket need for a wide chimney, and who builds it
- Clearance to framing and fireblocking checked where the stack passes through
FAQ
Rebuild questions from Baldwin
How long does a chimney rebuild take?
It depends on how far down the take-down goes, the flue work and the weather, plus cure time before the cap and first fire. The estimate gives a schedule with the working days marked.
What if you find the footing is the problem?
Then that comes first in writing, because rebuilding the top of a chimney whose base has moved does not stop the lean. It also says who would evaluate the footing.
Our Services
More services in Baldwin
-
-
-
-
-
-
Rebuild a loose or leaning chimney in Baldwin
Only the courses that test loose come down, and the take-down line on your chimney in Baldwin is marked before any price.
Free Inspection