Local chimney crown repair in Baldwin

For Baldwin chimneys, a crown that sheds water, sloped and overhanging, with a drip edge and a bond break at the flue. The inspection is free.

Family owned and operated
Free inspection and estimate
Same-day service available
Upfront pricing, no hidden fees

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

or call (904) 920-5495

Why Choose Us

Crown repair experts for Baldwin chimneys

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off when you book today

Thin mortar washes are replaced with a real cast crown instead of being skimmed over.

Free inspection and estimateWe map the cracks on your Baldwin crown and check the brick under it at no charge.
Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.

Call (904) 920-5495 Free Inspection

Crown work before selling a house in Baldwin

A cracked crown is an easy item for a buyer's inspector to spot from the roof, and it tends to show up on the report with a vague note about water intrusion. Dealing with it first takes that item off the table.

When a seller in Baldwin calls, the scope stays at what the crown needs, whether a coating or a recast, and the paperwork at the end describes what was done with the materials named. A buyer reading that record knows the top of the chimney was dealt with properly instead of painted over. Relaid brick is matched to the rest as closely as the stock allows. We check the cap and flashing on the same free trip to your Baldwin crown; call (904) 920-5495.

Measured in a straight line, Baldwin is about 23 miles from Jacksonville. Baldwin lies within Duval County.

What's Included

Crown repair jobs we handle in Baldwin

Crown sloped so water runs off toward the edges
Chimney cap refastened once the new crown can hold it
Roof and gutters cleared of crown debris at your Baldwin home
Coat or recast decision for your Baldwin crown in writing

Call (904) 920-5495 Free Inspection

How It Works

Map, prep, coat or pour, cure

Crown checked from the roof
We look at the slab, the brick right under it and the seal around each flue, then write down the option that fits with its price.
Old top cleaned or torn off
For a coating, the crown is cleaned and the wider cracks filled. For a recast, the old top comes off down to sound brick.
Coating brushed on or crown poured
A coating goes on in dry weather inside the maker's temperature range. A recast is formed with a slope, an overhang, a drip groove and a sealed joint at every flue.
Curing, then the cap goes back
New concrete stays covered and damp while it cures. The cap is refastened once the crown can hold it, and we show you the finished top.

Local Conditions

Storm season and chimney crowns in Baldwin

The Atlantic hurricane season runs from June 1 to November 30, and inland crowns in Baldwin still take the wind and the rain. A crown that was cracked before a storm can lose a corner in one.

Pieces of concrete on the roof or in the gutter after a storm are the sign to call. We find the crown they came from and say whether to seal or recast.

10% off your first service when you book today

Cracked chimney crown? Call today and your first service is 10% off.

Call (904) 920-5495 Free Inspection

Taking a failed crown down to sound masonry

Removing a crown is careful demolition on a roof. The old concrete or mortar is broken out in manageable pieces with hand tools or a small breaker, lowered in buckets or bags, and kept out of the flue with a cover over the tile.

The goal is to reach sound masonry: brick that is firm, mortar that is hard. Where the top courses are loose or soft, removal continues down through them, and they are relaid before the new crown is formed. How far down we expect to go, and how that changes if the brick is worse than it looks, is agreed before the first piece comes off.

Crowns around more than one flue

When a chimney has two or more flues, the crown has to drain between them as well as off the outside edges. The space between flue tiles is a natural low point, and a flat area there will hold water against both tiles.

Each tile needs its own bond break and its own check for height and cracks. Where the tiles are close together, forming the crown between them takes care so the concrete fills fully without voids. A cap that covers several flues sits on the finished crown, and its fastening is planned before the pour. Each flue's findings are recorded separately.

Crowns around a stainless liner top plate

After a flue is relined with a stainless steel liner, a top plate sits on the crown and the liner passes through it. The plate is sealed to the crown so water cannot run down between the old flue tile and the new liner.

Repairing the crown on a relined chimney means taking that plate off, repairing or recasting the crown, and resealing the plate to the finished surface with a sealant rated for the job. The liner itself is left undisturbed. If the plate is corroded or the seal has failed repeatedly, that becomes a separate line.

Free Inspection

Coat or recast, and the reasons

Removal of the failed top down to sound brick
Reinforcement and concrete mix for a cast crown
Rain protection for fresh concrete while it sets
Debris removal from the roof and gutters after the work

FAQ

Crown repair questions from Baldwin

Can I tell from the ground whether my crown is a mortar wash?

Sometimes. A thin gray layer that tapers to the edge with no overhang is likely a wash, while a thicker slab that projects past the brick is likely a cast crown. We confirm it from the roof.

Does crown work mean the chimney cap comes off?

For a recast, yes. For a coating, it depends on how the cap is mounted. The estimate says which applies to your chimney.

Our Services