Fireplace installation in Baldwin by local specialists

Local pros plan the unit, chimney, framing and hearth for your Baldwin room on a free visit, then build to the listing or the code.

Family owned and operated
Free inspection and estimate
Same-day service available
Upfront pricing, no hidden fees

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

or call (904) 920-5495

Why Choose Us

Local fireplace experts for new installs in Baldwin

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off when you book today

Factory-built units are installed with their own listed chimney parts, never mixed from other makers.

Family owned and operatedOne family business owns your Baldwin fireplace plan, from the framing or footing to the top of the chimney.
Free written estimatesUnit, chimney, framing, hearth, permit and any other trade sit on one free written estimate.
Workmanship warrantyOur installation work is covered by our workmanship warranty, and the unit carries its maker's terms.

Call (904) 920-5495 Free Inspection

The attic is where the details live

The attic holds the details that keep a chimney run safe. Where the pipe passes the ceiling, a listed firestop keeps the clearance to framing. Where it passes insulation, a steel shield holds the insulation back and stands above it. Rafters in the way are cut and headed off with framing sized for the load.

In an attic in Baldwin we also look at what else is there, ducts, wiring and access, because the chimney route has to leave all of it clear. Attic work is done from boards laid across the joists, so the ceilings below are not stepped through. The work area is lit and cleared before any cutting starts. Planning costs you nothing in Baldwin; call (904) 920-5495 and tell us which room you have in mind.

Baldwin is in Duval County. The 2020 Census count for Baldwin was 1,396 people.

What's Included

From route walk to hand-over

Chimney route walked from hearth to roof
Standoffs and clearances kept on every side of the unit
Outside combustion air ducted where the manual asks
Old worn-out unit removed and hauled away

Call (904) 920-5495 Free Inspection

How It Works

How fireplace installation runs

Route walked, hearth to roof
The room, the attic and the roof are checked for a clear chimney path before any unit is chosen.
Unit and chimney system chosen
A listed factory-built system from one maker, or a masonry fireplace on its own footing.
Framed, built and inspected
Framing and clearances follow the manual or the code, and the inspector sees them before the walls close.
Hearth, air supply and handover
The hearth extension and outside air go in, and we explain how to run the break-in fires.

Local Conditions

Masonry fireplaces in Baldwin

A masonry fireplace starts with its own footing at the ground, a foot thick and wider than the fireplace on every side.

When a home in Baldwin can take one, the plan shows the footing, the firebox, the throat and the chimney course by course.

10% off your first service when you book today

Want a fireplace? A booking today takes 10% off your first service.

Call (904) 920-5495 Free Inspection

The shield where the pipe meets insulation

When a factory-built chimney passes through an insulated ceiling or an attic, the code calls for a steel insulation shield of at least No. 26 gage around it. The shield keeps loose or batt insulation off the pipe and holds the clearance the listing needs.

In an attic, it has to stand at least 2 inches above the top of the insulation, which matters when insulation is added later. We fit the shield the chimney maker lists for that pipe size and leave the insulation level marked, so anyone who blows in more knows where the top has to stay.

Building an outside chase

An outside chase is a framed box on the exterior wall that carries a factory-built chimney up past the roof edge. It is framed and sheathed like an exterior wall, finished to match the house, and topped with a chase cover that the listed termination cap passes through. The manual says how the chase walls are insulated and sealed and what stays clear around the pipe.

A chase also needs its own support at the base, whether that is a foundation or framing tied into the house, sized for the chimney and the finish it carries. The chase cover itself is sloped or cross-broken so water runs off.

Rumford fireboxes, tall and shallow

A Rumford fireplace has a tall opening, a shallow firebox and angled side walls that throw heat into the room. The code makes room for it: a Rumford firebox may be as shallow as 12 inches, as long as it meets the other proportions the code sets for the design, including a throat of at least one-twentieth of the opening's cross-sectional area. A Rumford is a masonry build, and it is laid out from those proportions rather than from a standard firebox plan.

If you like the look, we draw it as a separate option. Its tall opening can push the opening area past 6 square feet, which enlarges the required hearth extension.

Free Inspection

Checked in Baldwin before a fireplace goes in

Clearance to combustibles marked on each side of the unit
Outside combustion air duct and intake location
Mantel height and depth checked against the chart or the code
Spark arrestor or listed cap sized to the flue outlet

FAQ

Before any wall is opened

Do I need a permit for a new fireplace?

Yes. A permit is required for this work under the Florida Building Code, and the local building department inspects it before the walls close and again at the end. The permit and those inspections appear in the schedule on the estimate.

Is a factory-built fireplace as safe as a masonry one?

Installed and kept to its listing, a factory-built fireplace is tested as a complete system with its chimney. Its safety depends on that listing being followed, which is why substitute parts are not used.

Our Services