Local electric fireplace installation in Atlantic Beach

Your Atlantic Beach wall measured and its circuit checked at no charge, then every part of the install priced in writing.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Installers who read the manual first

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

If anything about the install in Atlantic Beach slips later, the same local family crew comes back.

Free inspection and estimateThe wall and circuit at your Atlantic Beach home are checked against the unit's manual at no charge.
100% satisfaction guaranteedA unit left crooked, loose or not working to its manual gets a return visit and a fix at no cost.
Family owned and operatedThe family crew that measures your wall is the one that mounts the unit, so nothing gets lost between visits.

Call (904) 920-5495 Free Inspection

The breaker trips when the heat comes on

The heater in an electric fireplace draws a steady, heavy load, and a circuit already feeding lamps, a television and a space heater can trip when it switches on. The fireplace is fine. The circuit is full. Sometimes the answer is as simple as moving another appliance to a different circuit.

We check what else runs on that circuit and compare it with the unit's rating label. Where the manual or the load calls for a dedicated circuit, an electrician adds one and it is priced as its own line. Breaker tripping with a new fireplace in Atlantic Beach? Phone (904) 920-5495, and the circuit check is free.

Atlantic Beach sits in Duval County. The 2020 Census counted 13,513 residents in Atlantic Beach.

Mount, frame, insert, test

Recessed openings framed to the manual's rough size
Inserts set into a cleaned, closed-off firebox
Electrician work planned and listed separately
Heater run and cycle checked before we leave

Call (904) 920-5495 Free Inspection

Read, measure, mount, test

Manual read in advance
Send the model number, and the installation section is read before we arrive.
Wall and circuit checked
Studs, wall contents, clearances and the circuit are checked against the manual.
Mounted, framed or inserted
The unit is hung, set into a framed recess or placed in a prepared firebox, with electrician work done in sequence.
Tested and handed over
Flame, heat, remote and cycling are tested with you, and the controls explained.

The retired chimney above an insert in Atlantic Beach

An electric insert leaves the chimney above it idle, but on the coast its cap still faces salt air and storm wind. A rusted cap lets rain in toward the insert below.

When we install an insert in Atlantic Beach, the cap is checked and a stainless one priced where the old one has failed.

10% off any service booked within 72 hours of inspection

Mounting, trim and the finish around the unit are all discounted.

Call (904) 920-5495 Free Inspection

Wall-mounted, recessed or insert

Electric fireplaces go in one of three ways. A wall-mounted unit hangs on a bracket on the finished wall. Recessed models slide into a framed hole in the wall, finishing flush or nearly so. An insert slides into an existing firebox that will no longer burn wood.

Each has its own manual, and the manual decides the details: the bracket and fasteners for a wall mount, the rough opening for a recess, the size range for an insert. We match the method to the room and the unit. The estimate names which one you are getting and what it involves, so there is no surprise on the day. Some rooms suit more than one method, and then the choice comes down to the look you want and the work you accept.

An old gas line capped first

Some fireplaces being converted to electric once had gas, and a pipe or valve key may still be in the firebox or the wall beside it. That line is capped by a gas contractor before any electric insert goes in.

We do not touch the gas line. The estimate names the capping as a separate step, with who does it, and the insert is scheduled after it. The cord route is then planned so it stays clear of the capped fitting, and the capped line is noted on the paperwork for anyone who works on the fireplace later. Where there is doubt about whether a line is live, the gas contractor confirms it before we start.

Space in front of the heater

Manuals ask owners to keep furniture, curtains, bedding and similar items a set distance from the front of the heater. The warm air it moves can heat anything that crowds it.

We plan the fireplace's position with the room's furniture in mind, so the sofa or bed does not end up closer than the manual allows. Where a room is tight, a model that directs its heat differently, or a flame-only habit, may suit better, and we say so before you buy. Rugs, cushions and throws count as well, since they tend to creep toward a warm spot.

Install details written down before pricing

Model and rating label read: volts, watts and amps
Installation method: wall mount, framed recess or firebox insert
Controls set up and every function tested at handover
Cleanup of dust and packaging before we leave

Electric fireplace questions from Atlantic Beach

Do you install electric fireplaces in Atlantic Beach?

Yes. We install wall-mounted, recessed and insert electric fireplaces across Duval County, Atlantic Beach included. Give us the model number on the phone, and the manual gets read ahead of the visit.

Do you charge for the first visit in Atlantic Beach?

No. The first visit to check the wall and circuit is free, and the install is priced line by line. Book it within 72 hours of that visit, and 10% comes off.