Local chimney rebuild for Atlantic Beach homes

From roof protection to the first fire, your Atlantic Beach chimney rebuild is planned step by step on a free inspection.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local rebuild experts for Atlantic Beach chimneys

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

A rebuild in Atlantic Beach goes down only as far as the masonry is loose, and we show you where that line falls.

Family owned and operatedOur family business takes your Atlantic Beach chimney down by hand and lays it back up itself.
Upfront pricing, no hidden feesThe take-down line, flue plan and crown are priced before the first brick comes off.
Workmanship warrantyFrom the new courses to the counterflashing, the rebuilt stack carries our workmanship warranty.

Call (904) 920-5495 Free Inspection

Loose brick above the roofline

Brick that moves under a hand above the roof has lost the mortar that held it, and each wet and dry cycle loosens a little more. Left alone, loose courses can shift in wind or drop onto the roof below.

A partial rebuild takes those courses down to where brick and mortar test sound, then relays them with matched brick and fresh mortar, a new crown on top and the flashing let back in. You are told how many courses come off your Atlantic Beach chimney and why that is the line. Nothing is laid back until that line has been agreed with you. Tell us what you see from the ground; (904) 920-5495 reaches our rebuild team in Atlantic Beach.

Atlantic Beach borders the coast. Atlantic Beach falls within Duval County.

What a chimney rebuild covers in Atlantic Beach

Roof protected where brick and mortar could land
Sound original brick cleaned and saved to relay
Cap anchored once the crown has cured
Take-down line for your Atlantic Beach chimney stated in courses

Call (904) 920-5495 Free Inspection

How our rebuild specialists work in Atlantic Beach

Courses tested, line marked
Each course is pressed and probed from the top down, and the take-down line is marked where sound brick starts.
Taken down under cover
The flue is plugged and the roof protected, then brick comes off by hand and sound units are saved.
Relaid with flue and flashing
Courses go back plumb in the chosen mortar, the flue tile or liner rises with them, and counterflashing is set into the joints.
Height, crown and cap
The height is checked, a crown is cast with a drip edge and bond break, and the cap goes on after it cures.

Rebuilding chimneys by the water in Atlantic Beach

Atlantic Beach touches the ocean, and every metal part in a rebuilt stack takes salt air: counterflashing, ties, the cap and any reinforcing in the crown. Metal that would last for years elsewhere corrodes sooner here.

Rebuilds in Atlantic Beach use stainless or copper counterflashing, keep crown steel deep inside the concrete and fit a stainless cap.

10% off any service booked within 72 hours of inspection

Rebuilds booked within 72 hours of the inspection come 10% off.

Call (904) 920-5495 Free Inspection

Choosing a mortar type from ASTM C270

ASTM C270 sorts mortar for unit masonry into types by the mix of cement, lime and sand, or by tested strength. The stronger types are stiffer, and a mortar stiffer than the brick around it pushes movement into the brick instead of taking it in the joint.

The Brick Industry Association's guidance is to pick the lowest-strength type that still meets the job's needs. For a chimney top that means matching the mortar to the brick and the exposure instead of reaching for the strongest bag. The type chosen is named before work starts. Color is matched separately through the sand and any pigment, since the type sets strength and the sand sets the shade.

Letting counterflashing into the new masonry

Rebuilding is the best chance to set counterflashing properly. As courses rise past the roof, the metal is set into the bed joints, or into a reglet cut after the masonry cures, and turned down to lap over the base flashing below.

Mortar or sealant alone at that joint fails as the roof and chimney move. Lapped metal sheds water even when they move. Roof flashing is governed by the Residential code's roofing chapter, chapter 9, together with the roofing maker's details, with the base pieces that tie into the roof covering fitted by whichever trade is assigned that piece.

Keeping the rebuilt masonry off the framing

A rebuild that reaches into the attic has to keep its distance from wood. The code wants a 2-inch airspace between combustibles and any part of a masonry chimney that runs through the interior or is built into an outside wall, and 1 inch for a chimney standing wholly outside, including where it passes a soffit or cornice (FBC R1003.18).

Framing that was built tight to the old stack is noted, and the rebuilt masonry is laid to hold that gap. Where a roof deck edge touches the brick, it is trimmed back as part of the tie-in.

Tested before a rebuild is priced in Atlantic Beach

Joint profile tooled concave or V once the mortar firms
Cast crown with an overhang, a drip edge and a sealed bond break
Clearance to framing and fireblocking checked where the stack passes through
Permit expectation, who files, and where inspections fall in the schedule

Before the first brick comes off

How long does a chimney rebuild take?

It depends on how far down the take-down goes, the flue work and the weather, plus cure time before the cap and first fire. The estimate gives a schedule with the working days marked.

Will the rebuilt section look like the rest of the chimney?

Original brick is reused where it tests sound, and new brick is chosen for size, then color and texture. New mortar shades differently at first and settles as it cures. An exact match is not something anyone can promise; the estimate shows which brick is planned.