Electric fireplace service in Atlantic Beach by local pros

From a slipped flicker rod to a failed control board, Atlantic Beach electric fireplace repairs done by a family crew.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Family-owned repair experts serving Atlantic Beach

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Inserts and wall units are handled with the trim and wall protected.

Free inspection and estimateYour Atlantic Beach unit is tested part by part, from the outlet to the board, at no charge.
100% satisfaction guaranteedIf the repaired unit does not heat, light and respond as its manual says, we return and put it right.
Family owned and operatedThe family crew that traces the fault in your unit is the crew that repairs it.

Call (904) 920-5495 Free Inspection

A wall unit that is hard to reach

Wall-mounted electric fireplaces hang on brackets, and many repairs mean lifting the unit off to reach the back panel. That takes two people and care for the wall and the trim. If the bracket itself has worked loose, it is refastened before the unit goes back up.

We plan the lift, protect the floor below and set the unit on a padded surface to work. Once the part is replaced, it goes back on the bracket and is checked for level. Wall-mounted fireplace not working in Atlantic Beach? Phone (904) 920-5495, and our family crew will diagnose it on a free visit.

The 2020 Census count for Atlantic Beach was 13,513 people. Atlantic Beach reaches the coastline.

Heater, flame, board and remote

Supply checked before the unit is opened
Noisy fan motors replaced by part number
Bulbs or LED assemblies renewed
Wall units lifted off and rehung level

Call (904) 920-5495 Free Inspection

How our repair pros fix an electric fireplace in Atlantic Beach

Model number first
Read us the rating label, and parts availability is checked before the visit.
Supply, then each part
The outlet and breaker are checked, then heater, fan, flame effect, board and remote are tested in order.
Failed part replaced
The maker's part for your serial number is fitted, with any electrician work done separately.
Retested with you
Heat, flames, remote and thermostat are run through their settings before we leave.

Water near the wall after a storm in Atlantic Beach

Wind-driven rain on the coast can find its way into a wall. If water has reached the outlet or the unit, leave it switched off.

In Atlantic Beach we check the unit once an electrician has cleared the outlet and wiring.

10% off any service booked within 72 hours of inspection

An electric fireplace repair in Atlantic Beach is 10% off when approved within 72 hours of the diagnosis.

Call (904) 920-5495 Free Inspection

Dust, pet hair and airflow

Electric fireplaces pull room air in through an intake, pass it over the element and push it back out. Over time, dust and pet hair build up in the intake and on the fan, cutting the airflow.

Less airflow means less heat and a hotter element, which can trip the cutoff. With the power off, we clean the intake, fan and element area as the manual allows, then run the heater to check the output. We also show you which parts of the cleaning you can do yourself, and how often your manual suggests it. The outlet grille is cleaned too, since lint on it can mislead the thermostat as well as block air.

Tracking down a new noise

Electric fireplaces make a gentle fan hum and a faint motor sound from the flame effect. A new grinding, ticking, buzzing or rattling noise is worth tracking down before it gets worse.

We run each part on its own to isolate the sound. Grinding usually means fan bearings. Ticking can be a fan blade touching its housing or expansion of metal parts as they heat. Rattling can be a loose panel or bracket. Buzzing near the lights or board can point to a failing component. Each has its own fix. Some sounds are normal, and we tell you which ones so you are not worried by them later.

Front glass, screens and cleaning

The front of an electric fireplace is often a special glass or screen that is part of the flame effect. Abrasive cleaners scratch it, and sprays can seep into the unit.

Manuals give cleaning instructions for the front, usually a soft cloth and a mild cleaner applied to the cloth, not the glass. A cracked or scratched front is swapped for the one listed for your model, which often means taking the unit off the wall or out of its opening. We follow the manual's steps for that. Fingerprints on the inside of the glass mean the unit has been opened before, and that is worth knowing.

What we test on units in Atlantic Beach

Heater element, fan, thermostat and cutoff tested one by one
Flame effect motor, rod and light source tested
Control board, receiver and remote checked in order
Failed part named with the maker's number and expected arrival

Before a part is ordered

Can you get parts for an older model?

Usually, through the maker or its parts distributors, ordered by model and serial number. A discontinued part is flagged to you before any charge.

What if the problem is the outlet?

An outlet or circuit fault is electrician work under NFPA 70, and it is listed separately. We check the unit's cord and plug so the fireplace is ready once the outlet is fixed.