Local chimney repointing in Tallulah-North Shore
A free survey of every face in Tallulah-North Shore, same day if the calendar allows, and 10% off repointing you book within 72 hours.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Masons who survey every face first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The color is matched from a cured test batch before a single joint is filled.
- Free inspection and estimateEvery face of your Tallulah-North Shore chimney is scratch-tested and sketched at no charge.
- 100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
- Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.
Deteriorated mortar on a sale report
Home sale reports often list a chimney with deteriorated or missing mortar and recommend a mason. The note rarely says which faces, how deep or how urgent. Where one face is fine, that is written down too, so nobody pays to repoint sound mortar.
Our survey fills that in. Each face is scratch-tested, the worst joints are measured for depth, and the estimate prices each side separately so buyer and seller can agree on scope. Mortar flagged on an inspection report in Tallulah-North Shore? Send the page with your call to (904) 920-5495; the inspection is free.
Tallulah-North Shore lies within Duval County. Tallulah-North Shore does not reach the coast.
Raked, filled, tooled and cured
- Worn joints raked to sound depth
- Joints cleaned and dampened before filling
- Deep joints filled in layers, not one pass
- Mortar type chosen to suit the brick
From the scratch test to cured joints in Tallulah-North Shore
-
Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
-
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
-
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
-
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.
Cleaning old mortar haze in Tallulah-North Shore
Gray haze left on brick by an earlier repointing is a workmanship problem, not a local one.
On Tallulah-North Shore chimneys we test the gentlest cleaning method on a small patch before treating a whole face.
10% off any service booked within 72 hours of inspection
Our masons take 10% off repointing booked in the three days after they survey the joints.
Where a grinder helps and where it harms
On long bed joints between courses, a grinder can open the joint quickly, provided the joint is wide enough for the blade and the mason is steady. The danger is the brick edges, which a wandering blade chips or widens.
We use a grinder only where the joint width allows it, keep the cut inside the old mortar and finish by hand to square the joint. On older, softer brick, or where joints are thin, the whole job is done by hand. The method for each face is written on the estimate so there is no surprise about what tools come up the ladder.
Repointing some faces or the whole stack
Repointing only the failed faces saves money, and it is often the right call. The trade-off is appearance: new joints on one side can look slightly different from weathered joints on the next, even with a good color match.
We explain that trade-off before you decide. Where faces meet at a corner that shows from the street, it may be worth extending the work around it. Where the failed side faces the back of the house, the difference will not matter. The choice is yours, and the estimate prices each option. Either way, faces left untouched are recorded as tested and sound, so the next survey knows where to look.
Lime-rich mortar in older chimneys
Chimneys built generations ago often used mortar with much more lime and less cement than modern mixes. Lime mortar is softer and more vapor permeable, and the soft old brick around it was built to work with it.
Preservation Brief 2 advises matching the old mortar's properties when repointing historic masonry. On an older chimney we look at the existing mortar before choosing a mix, and where it is lime-rich, the new mortar follows suit rather than jumping to a strong cement mix. The estimate names the mix chosen. A lime-rich mix also cures more slowly, and the schedule on the estimate allows for that.
Joint findings written down before pricing
- Mortar type under ASTM C270 and the reason for it
- Color matched from a cured test batch shown to you first
- Spalled or cracked bricks to replace before their joints
- Roof protection, debris collection and gutter cleanup
Repointing questions from Tallulah-North Shore
Is a fire safe while the chimney is being repointed?
Best not on the days we work on the top, and not until the new mortar has had its curing time. The estimate gives the wait based on the mortar and the weather.
What if you find loose bricks while raking?
We stop and show you. A loose brick or course needs relaying or replacement, which is priced as its own item before we continue.
More services in Tallulah-North Shore
-
-
-
-
-
-
Learn more about chimney tuckpointingAll services in Tallulah-North Shore
Book a joint survey before the next storm
From a few top courses to the whole stack, repointing in Tallulah-North Shore is priced face by face before work begins.
Free Inspection