Local chimney cap replacement in Tallulah-North Shore
New caps in Tallulah-North Shore go on after nests, debris and loose parts come out, and the first inspection is free.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chimney cap specialists who measure every flue
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Every screen we fit comes off for the sweep, so the flue can still be cleaned from the top.
- Free inspection and estimateWe measure every flue on your Tallulah-North Shore chimney at no charge before any cap is ordered.
- Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
- Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.
Screens that meet the Florida code
What most people call the screen on a cap, the Florida residential code calls a spark arrestor, and its section R1003.9.2 sets how one must be built when it is fitted to a masonry chimney. The section deals with open area, the strength of the screen, the size of the openings and whether the screen can be taken off for cleaning. Every screened cap we propose for your chimney in Tallulah-North Shore is checked against those points before it is ordered. The estimate states the opening size and the grade of the mesh, so you can see the check was made rather than take it on trust. Cap rusted, bent or gone in Tallulah-North Shore? Our cap pros inspect it for free at (904) 920-5495.
Tallulah-North Shore is on the Trout River. Tallulah-North Shore is a neighborhood within the City of Jacksonville.
Cap replacement work for Tallulah-North Shore homes
- Fasteners in a metal that matches the cap
- Lid or screen that comes off for the sweep
- Cap on your Tallulah-North Shore home fastened to hold in a storm
- Two-flue chimneys fitted with two caps or one cover
Measure, match, clear, fasten
-
Tiles measured on the roof
Each flue tile is measured inside and out, along with its height above the crown.
-
Cap style and metal chosen
Slip-in, band-mount or full-crown, in a metal suited to the roof, with a screen that meets the Florida code.
-
Flue cleared, cap fastened
Any nest or debris comes out of the flue, then the cap is set and fastened for wind.
-
Fit and screen checked
We check that the cap sits square, the hood height matches the chart and the screen comes off for the sweep.
A damper that doubles as a cap in Tallulah-North Shore
A top-sealing damper sits on the flue tile with a hinged, gasketed lid, opened and closed by a cable from the firebox. Closed, it keeps rain, animals and room air where they belong.
When a chimney in Tallulah-North Shore also needs a better damper, we price this option beside a standard cap.
10% off any service booked within 72 hours of inspection
On the cap estimate in Tallulah-North Shore, the 10% discount sits on its own line under the price.
Reading the grade on a stainless cap
Stainless steel is a family of alloys. Cap makers state the grade in their literature, and the grade sets how the cap resists corrosion. Two caps that look alike in a catalog photo can differ in grade and in the gauge of the sheet, and the thinner one dents and flexes more in wind. Both get named before a cap is ordered: the grade the maker specifies and the gauge of the hood and frame. Knowing the grade also tells a future contractor which fasteners and sealants are compatible, which matters when the cap is serviced years from now by someone who was not there when it went on.
A flue tile cut level with the crown
Some crowns were poured up to the top of the flue tile, or the tile was cut off level with the concrete. Most single-flue caps need tile standing above the crown to clamp around or seat on, so a flush tile leaves them little to hold. The practical answers are an outside-mount cap that fastens to the crown itself, or a crown repair that re-forms the top with the tile standing proud and a caulked joint around it. We explain both, since the second also corrects a crown detail the chimney design note from BIA treats as standard: the tile standing at least 2 inches above the crown.
Why the old cap is not the pattern
Ordering a replacement to match the cap that came off is tempting. The trouble is that the old cap may not have fit in the first place. Caps sized a step too small get forced over a tile and crack it; caps a step too large sit loose and walk off in wind. Some were fitted before the crown was redone and no longer match the tile height at all.
So we measure the tile and the crown as they are today and size from the maker's chart, and the old cap leaves the roof with its fasteners. The measurements stay on file for whoever services the chimney next.
What sets the cap on your estimate
- Inside and outside size of each flue tile, measured on the roof
- Access for sweeping: which part lifts off and how it refastens
- Fastener metal matched to the cap to avoid galvanic corrosion
- Clean-up of old metal, screws and debris from the roof and yard
Cap questions we hear in Tallulah-North Shore
Can the old cap be repaired instead of replaced?
A sound cap that has only worked loose can be reseated and refastened. Rusted mesh, a split band or a bent hood mean replacement. We tell you which one you have before any work is priced.
Should the replacement cap match the old one's size?
Only if the old one fit. We size from the tile and crown as they are now, using the maker's chart, and the estimate lists the measurements.
More services in Tallulah-North Shore
-
-
-
-
-
-
Learn more about chimney cap installation and replacementAll services in Tallulah-North Shore
Replace a missing or rusted cap in Tallulah-North Shore
Our cap pros measure every flue on your Tallulah-North Shore chimney and write the cap and metal down. Call (904) 920-5495.
Free Inspection