Fireplace repair in Sunbeam by local experts
Masonry and factory-built fireplaces in Sunbeam repaired to the code or the maker's listing, once a free inspection has found the fault.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local fireplace experts for Sunbeam homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Firebox joints get refractory mortar, because ordinary mortar breaks down under the heat of a fire.
- Locally ownedA locally owned business shows you the failing part of your Sunbeam fireplace before any price.
- Upfront pricing, no hidden feesSafety repairs come first on the estimate, and items that can wait are priced on their own lines.
- 100% satisfaction guaranteedIf the fireplace still smokes or sticks after the repair we quoted for it, we come back.
Why the price comes after the look
Described on the phone, a fireplace problem can point to more than one repair. A stuck damper might free up with cleaning, or it might need a new plate cut to fit the throat. Smoke in the room might be the house pulling air, or an opening too tall for its flue. That is why the price for a fireplace in Sunbeam comes after we have looked, in writing, with the cause beside it. The estimate is free, and looking first is how we keep you from paying for a repair that does not fix the problem. Firebox cracked or damper stuck in Sunbeam? Call (904) 920-5495 for a free fireplace inspection.
Sunbeam is a neighborhood inside Jacksonville city limits. Sunbeam lies within Duval County.
Firebox, damper, hearth and trim
- Damper plate, pivot and handle worked and repaired
- Hearth slab support checked when tile cracks across
- Smoke problems traced with a test fire
- Rusted lintel over the opening checked for movement
From test fire to finished repair in Sunbeam
-
Type and rating plate read
We settle whether the fireplace is masonry or factory-built and read the model where there is one.
-
Joints, damper and hearth checked
Joints are probed, the damper worked through its travel, and the hearth and trim measured.
-
Repair with the right materials
Refractory mortar and firebrick for masonry, the maker's parts for factory-built units.
-
Test fire and cleanup
Where smoke was the problem, a short test fire checks the fix, and the room is cleaned before we go.
Ash doors in masonry fireboxes
Some masonry fireboxes have a small cast door in the floor that drops ash into a pit below. The door can rust shut or warp until it no longer closes.
We free or replace ash doors in Sunbeam fireplaces as part of the firebox repair.
10% off any service booked within 72 hours of inspection
Smoke, damper or firebox, whatever is wrong with your Sunbeam fireplace, the repair is 10% off.
Pokers, rotary handles and chains
Dampers are worked by one of a few mechanisms: a poker handle that pushes the plate open and hooks at a notch, a rotary handle on the face of the fireplace turning a rod, or a chain running to a damper at the top of the flue. Each fails in its own way. Pokers bend and their notches wear, rotary rods seize where they pass through the masonry, and chains stretch or pull free of their bracket. The repair may be freeing, straightening or replacing the linkage rather than the damper itself, and it is priced apart from the plate so you are not buying a new damper to fix a handle.
When the house pulls against the fireplace
A fire needs air, and in a tight house with a range hood, bath fans or a clothes dryer running, the fireplace can become the easiest path for outside air to come in. Smoke then comes down instead of going up. The code's answer is an exterior air supply to the fireplace, unless mechanical ventilation keeps the room at neutral or positive pressure.
On a repair visit we test it directly: a fire lit with every exhaust fan off, then with them on, and then with a window open. The difference between the three tells us whether the fireplace or the house is the problem.
An opening too big for its flue
Flue size and opening size are tied together in the code: a square flue needs at least a tenth of the opening's area, a round one a twelfth, and a rectangular flue at least twice as long as it is wide needs an eighth. When the opening is too large for the flue, the draft cannot carry all the smoke, and some rolls out the top of the opening. We measure both and do the arithmetic on site. The fixes that work reduce the opening, with a metal smoke guard across the top or a raised firebox floor, each sized to bring the ratio back in line.
Parts, materials and safety items on paper
- Firebox joints raked and refilled with medium-duty refractory mortar
- Cracked or loose firebrick cut out and replaced, counted brick by brick
- Refractory panels ordered by model number from the rating plate
- Hearth extension measured from the opening and checked against the code
Fireplace repair questions from Sunbeam
Do you repair factory-built fireplaces as well as brick ones?
Yes. Factory-built units are repaired with the maker's parts, ordered from the model on the rating plate, so the fireplace stays within its listing. Brick fireplaces are repaired with firebrick and refractory mortar to the building code.
Does the 10% off cover fireplace repair?
It does. A fireplace repair booked within 72 hours of the inspection is 10% off, shown as its own line on the written estimate.
More services in Sunbeam
-
-
-
-
-
-
Learn more about fireplace repair and serviceAll services in Sunbeam
Smoky fireplace, free check
Our fireplace pros find what failed in your Sunbeam fireplace and write the fix down. Call (904) 920-5495.
Free Inspection