Local fireplace restoration in Sunbeam
An unused fireplace in Sunbeam restored to working order, with the drying time before the first fire written down.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Fireplace restoration experts for Sunbeam homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The face is cleaned only after a trial patch you have seen dry.
- Family owned and operatedA family business plans your Sunbeam fireplace as one job, so each step happens once and in the right order.
- 100% satisfaction guaranteedYou approve the trial patch and the mortar sample before the face is touched, and our guarantee covers the result.
Soot across the brick face
Black staining above the opening is one of the first things people want gone, and one of the easiest places to do harm. Scrubbing hard, blasting or reaching for strong acid can take the surface off old brick for good, and some light-colored brick stains worse under acid than it was before.
We start with the gentlest method that might work, try it on a small, low patch, and let it dry so you can judge it before we move on to the whole face. Soot-stained fireplace face in Sunbeam? Get a free look by calling (904) 920-5495.
Sunbeam falls within Duval County. Sunbeam lies inland.
Restoration work for Sunbeam fireplaces
- Smoke chamber parging restored
- Worn or damaged face brick replaced with matched units
- Hearth condition and size recorded
- Drying times and the first fire date for your Sunbeam home
How fireplace restoration runs
-
Clean and assess
Everything from the hearth to the flue top is cleaned, then checked and written up part by part.
-
Heat side first
Firebox, parging and damper repairs are made in refractory materials and left to dry.
-
Trial, then the face
A trial patch is cleaned and a mortar sample made for your approval before the face work.
-
Repoint, cure, clean
Face joints are repointed in layers, left to harden, then the face gets its final cleaning.
Stone faces inland in Sunbeam
Some fireplaces in Sunbeam have stone faces or stone mixed with brick. Stone takes its own cleaners and wider joints.
We identify the stone before the trial patch.
10% off any service booked within 72 hours of inspection
The restoration comes 10% off and carries our 100% satisfaction guarantee like any job.
Why the order of work matters
An old fireplace restored in the wrong order costs more and looks worse. Cleaning the face before the joints are repaired can wash grit into open joints, and repointing the face before the heat side is fixed means working twice around the opening.
Our order is set: clean the flue, smoke chamber and firebox; repair the heat side; free or replace the damper; then test-clean and repoint the face, and clean it again only once the new mortar has hardened. Each step is on the estimate in that sequence, with its drying time, so the order is visible before anything starts.
Why the face is not blasted
Abrasive blasting takes stains off by taking off the surface of the brick with them. The Brick Industry Association's guidance says not to use it except in narrow cases, and warns that abrasive methods and high-pressure water can etch mortar joints and damage the brick face.
Once the fired surface of an old brick is gone, the softer body underneath is exposed and takes up water and dirt faster. Restoration cleans with water, brushes and mild cleaners, tested first, so the face that is left is the original one. Where a stain resists all of that, we say so plainly.
Mantel and trim near an old opening
Florida's R1001.11 lets an exposed combustible mantel or trim sit on the fireplace front only if it stays 6 inches or more from the opening. Closer than 12 inches, it may project from the face no more than an eighth of an inch per inch of distance.
During restoration we measure every combustible piece near the opening against those figures. Trim that is too close is listed by itself, because it must change before the fireplace is used, and the estimate shows the measurement that put it on the list.
Cleaned and checked in Sunbeam before a plan is priced
- Smoke chamber parged smooth where parging is missing
- Trial cleaning patch on the face, judged dry
- Deep joints filled in thin layers and tooled at thumbprint hardness
- Hearth extension size and condition noted separately
Before an old fireplace is brought back
Will all the soot come off?
That depends on the brick and how long the stain has been there. We clean a small trial patch first and show you the result once it is dry.
Can you restore a stone fireplace too?
Yes. Stone joints and cleaning take their own methods, and we identify the stone before choosing any cleaner or mortar.
More services in Sunbeam
-
-
-
-
-
-
Learn more about fireplace restorationAll services in Sunbeam
Plan your Sunbeam fireplace restoration
A free restoration inspection in Sunbeam is a call to (904) 920-5495 away, and work booked within 72 hours of it is 10% off.
Free Inspection