Stone veneer chimney repair for St. Nicholas homes
From one cracked stone to a veneer reinstall, stone chimney repair in St. Nicholas starts with a written estimate.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Stone chimney specialists for St. Nicholas homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Loose stones overhead are made safe before anything else.
- Free inspection and estimateWhether your St. Nicholas chimney is full stone or veneer is settled on a free visit, before any price.
- Upfront pricing, no hidden feesStones, joints and veneer area are priced in writing one line at a time.
- Family owned and operatedOur family-owned masons approve the mortar sample with you before the first joint is filled.
Stone damaged after a storm
A storm can loosen stones at the top of a chimney, chip corners with flying debris, or open a crack in the crown that lets water behind the veneer. From the ground, the damage may be a single stone out of line. Loose stones at the top of the chimney are a falling hazard, not a cosmetic problem.
After a storm in St. Nicholas, keep clear of the chimney base if anything has fallen, and call (904) 920-5495. Our masons check the top courses, the crown and the veneer bond, and list what has to happen first and what can follow later.
St. Nicholas lies within Duval County. St. Nicholas is inland.
Stone chimney repairs we handle in St. Nicholas
- Deep stone joints raked and repointed in layers
- Base drainage exits opened and restored
- Your St. Nicholas chimney's build identified before pricing
- Every stone reset on your St. Nicholas chimney counted on the ticket
Identify, rake, reset, match
-
Describe what moved
Tell us what has shifted or fallen, and the free visit comes equipped for it.
-
Build and backing confirmed
Corners, joints and the base show the build, and a loose piece shows what is behind the veneer.
-
Reset, repoint or reinstall
Stones go back on fresh beds, joints fill in layers, and veneer returns to a repaired backing.
-
Matched and cured
An approved mortar sample and the old joint profile guide the finish, and the cure time is written down.
The cap on an inland stone chimney in St. Nicholas
A stone chimney in St. Nicholas needs a sloped cap with a drip edge, just like every other masonry chimney. Without one, rain runs over the top courses and into the joints.
Every stone repair includes a look at the top, with crown work priced separately.
10% off any service booked within 72 hours of inspection
On a stone chimney in St. Nicholas, the mortar match and the discount both go in writing.
How deep stone joints are raked
Preservation Brief 2, the Park Service's repointing guide, ties rake depth to joint width, asking for a cut two or two and a half times as deep as the joint is wide, and warns that wide stone joints can need clearing several inches back before firm mortar appears.
Stopping short leaves new mortar sitting on crumbly mortar, and it falls out with it. We rake until the chisel meets firm mortar, mostly by hand on stone, since a grinder blade can nick the edges of irregular stones. On irregular stone, the depth is checked joint by joint, since one joint may be sound an inch in while its neighbor is soft far deeper.
Replacing a broken stone
A stone cracked through its body is cut out along its joints and replaced. The replacement has to match in type, color and size, and for natural stone that may mean a piece from a supplier of the same stone, or a salvaged piece from a hidden face of the chimney.
Replacement stones are trimmed to fit the opening, with any cut face turned in or dressed to match the natural face. Each replaced stone is counted on the ticket, with where its match came from. Where no match can be found, the options and how each would look are shown before any stone is cut out.
Cleaning stone without damaging it
The gentlest method that works is the right one for stone. Low-pressure water and soft brushes come first, then cleaners chosen for the stone type, each tried on a hidden spot. Acidic cleaners etch limestone and marble, and high-pressure water can erode soft stone and open joints.
We name the method and the product on the ticket so the next cleaning follows it. If staining comes from water or smoke, we tell you, because cleaning a stain whose cause remains only buys time. Any cleaner is rinsed off thoroughly, since residue left in the pores can stain or draw salts to the surface.
Stone, joints, backing and base, in writing
- Loose stones counted, reset on fresh beds and repointed
- Mortar mix and sand matched, with a cured sample to approve
- Base drainage exit checked and opened where buried
- Veneer gap above the roof corrected to the maker's guide
Stone chimney questions from St. Nicholas
Do you charge to look at a stone chimney in St. Nicholas?
No. The stone, the joints, the top and the base are all checked, and the written estimate costs you nothing.
Why not just seal the joints with caulk?
Caulk keeps water in as well as out, so the mortar behind it stays wet and fails. Repointing with the right mortar lets the joint dry the way it should.
More services in St. Nicholas
-
-
-
-
-
-
Learn more about stone chimney repairAll services in St. Nicholas
Stone that stays put and joints that match
Book the free stone chimney inspection in St. Nicholas; stone work agreed in the three days after it comes 10% off.
Free Inspection