
Gas fireplace installation in San Marco by local specialists
A gas fireplace for a room in San Marco with no chimney, venting through the wall where a free inspection shows the clearances allow.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Local gas fireplace experts for new installs in San Marco
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Gas lines are run by a gas contractor or the propane supplier, and we set out who and when.
- Family owned and operatedOne family business frames, vents and starts up the unit in San Marco, and lines up the gas and electrical trades.
- Free written estimatesThe unit, vent parts, framing, permit and every trade are on one free written estimate.
- Workmanship warrantyThe workmanship warranty applies to our venting, framing and start-up, and the unit keeps its maker's terms.
Putting it in while the walls are open
A remodel that already has the walls or ceiling open is the easiest time to add a gas fireplace. The framed enclosure, the vent run through open framing, the gas line and any wiring can all go in before the drywall, and the inspector can see each of them.
While the San Marco remodel is still in planning, we can give your contractor the framing sheet from the unit's manual so the wall is built to fit. Getting the dimensions in early costs nothing and saves cutting into a finished wall later. Tell us the remodel schedule and we fit the fireplace steps into it. We plan gas fireplace installs in San Marco on a first visit that costs nothing; call (904) 920-5495.
San Marco is one of the named neighborhoods of Jacksonville. San Marco is in Duval County.
What's Included
What a gas fireplace installation covers in San Marco
- Vent exit found on the outside wall or roof first
- Vent route drawn and checked against the vent table
- Wiring for the receiver and blower run before the wall closes
- Facing and mantel planned from the manual's chart
How It Works
How gas fireplace installation runs
-
Unit and vent route chosen
We pick a listed unit for the room and draw the vent route against the manual's vent table.
-
Framed and vented to the manual
Framing, header and clearances come from the manual, and the vent is run with its firestops and supports.
-
Gas and power by their trades
A gas contractor or the propane supplier brings gas to the shutoff valve, and an electrician adds any outlet.
-
Start-up readings and leak check
Pressures are read at the valve, every joint is leak-checked, the flame is checked and the barrier fitted.
Local Conditions
Propane installs in San Marco
A propane fireplace runs from a tank outside the house, and the manuals are clear that the tank never goes inside a structure.
For propane installs in San Marco, the supplier sets the tank and runs the line, and we coordinate the start-up with them.
10% off your first service when you book today
Planning a vented unit? A booking made today saves 10% on your first service.
Soffits, eaves and porch ceilings
Heat and exhaust rise, so the manual sets how far below a soffit or eave a termination has to sit. A ventilated soffit, with openings that could take exhaust into the attic, needs more distance than a solid one. Porches and decks are handled separately: a termination may sit under a veranda, porch or deck only when it is open on the sides the manual specifies, and at the height it gives. Vinyl soffits can deform from heat, and some makers warn against terminating beneath them.
We check each overhead surface near the chosen spot. The measurements go on the plan.
The first long burn
A new gas fireplace gives off an odor the first time it runs, as the paint and materials cure, so plan on open windows during that burn-off, as the manuals advise. One maker recommends running the unit for an extended period the first time, with the fan switched off. We start that process at handover, open the windows, and tell you what to expect over the first few fires.
An odor that persists after the burn-off, or any smell of gas, is a different matter and a reason to call. Children and pets are best kept out of the room while it happens.
No shortcuts through an old flue
An existing chimney or flue in the wall can look like a free vent path, but a vented gas fireplace uses the vent system its manual lists, run from the unit to its own termination. A vent tied into a wood-burning chimney, or shared with a water heater or furnace, is outside what the manuals permit.
Where an old chimney is to carry a gas vent, that is an insert or liner job with its own listed parts. The new vent route is drawn in full, from the unit to its own termination. That keeps each appliance's draft and exhaust separate. No existing flue is borrowed.
Free Inspection
Checked outside and in before an install in San Marco
- Horizontal pitch and support spacing set as the manual shows
- Gas supply to the shutoff valve, named with the trade that runs it
- Every connection leak-checked with solution before handover
- Permit and inspections placed in the schedule
FAQ
Before the vent hole is cut
Do you run the gas line to the new fireplace?
No. The line to the unit's shutoff valve is a gas contractor's job, or the propane supplier's on a propane system. The estimate says who and when, and start-up follows once gas reaches the valve.
Does the first-service discount cover a gas fireplace installation?
It does, when the installation is your first job with us. The written estimate shows the 10% off as its own line.
Our Services
More services in San Marco
-
Chimney Flashing Repair The metal joint between roof and chimney, re-formed so rain runs past it.
-
Chimney Leak Repair Water coming in at the chimney, traced by testing and stopped where it enters.
-
Fireplace Installation New and replacement fireplaces, factory-built or masonry, with their chimneys.
-
Chimney Crown Repair The concrete top of the chimney, sealed or recast so it sheds water again.
-
Chimney Waterproofing Brick that soaks up rain treated with a breathable repellent.
-
Gas Fireplace Repair and Service Gas units that will not light, stay lit or burn right, plus service.
Learn more about gas fireplace installationAll services in San Marco
Find where a vent can go on your San Marco home
Room with no chimney in San Marco? Our local specialists check where a vent can go at no charge.
Free Inspection