Wood stove insert installation in Ponte Vedra Beach
Mantel, hearth and side clearances in Ponte Vedra Beach measured against the insert's label on a free inspection, before the order is placed.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Insert specialists who measure first in Ponte Vedra Beach
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
An insert in Ponte Vedra Beach goes in only after the fireplace has been measured against the insert's own table.
- Free inspection and estimateYour Ponte Vedra Beach firebox, chimney height and hearth are measured against the insert's manual at no charge, before anything is ordered.
- Upfront pricing, no hidden feesEvery part of the job is priced before ordering, from repairs to the rain cap, and nothing is added without your yes.
- 100% satisfaction guaranteedIf the insert smokes or draws poorly after installation to its manual, we come back and set it right.
What goes up the chimney with an insert
Running a liner up an old flue is most of the work of an insert installation. The liner goes in from the top, down through the damper area into the fireplace, and connects to the insert's collar, while a top plate and a rain cap close the old flue around it.
Each piece is listed on the estimate with its size and material, and the liner's length is measured before ordering so nothing arrives short. Curious what an insert install involves at your Ponte Vedra Beach house? Walk through it with us on a free visit booked at (904) 920-5495.
Ponte Vedra Beach is in St. Johns County. Ponte Vedra Beach lies on the coastline.
Insert installation for Ponte Vedra Beach fireplaces
- Listed wood inserts installed to their manuals
- Fireplace repairs finished before the insert goes in
- Inserts in factory-built fireplaces only where both allow it
- Model, liner and clearances recorded for your Ponte Vedra Beach house
How our insert pros install a wood insert in Ponte Vedra Beach
-
Measure against the manual
Firebox, chimney height, hearth and clearances are checked against the insert's table before ordering.
-
Repair and clean first
Fireplace repairs are made and cured, and the flue is cleaned before the liner goes up.
-
Liner, plate and cap
A listed stainless liner runs to the top, closed with a top plate and a rain cap.
-
Set, seal and fire
The insert and surround go in as the manual directs, and the first fire is run with you.
A coastal chimney and a new liner in Ponte Vedra Beach
Before a liner goes into a chimney on the coast in Ponte Vedra Beach, the top of the flue gets a close look, since the top plate will rest on it.
Rust or cracking at the flue top goes on the estimate, and the plate is fitted once the top is sound.
10% off any service booked within 72 hours of inspection
Ready for an insert? Save 10% on the installation by ordering within 72 hours of the inspection.
Cleaning the flue before the liner
Before a liner goes up an old flue, the flue is cleaned and checked for obstructions, which one maker stresses when a chimney has sat unused for some time. For a factory-built fireplace, the same guide calls for the chimney system to be cleaned thoroughly before installing.
Cleaning first also lets us see the flue lining and the smoke chamber, which a liner will hide once it is in. Anything found, a cracked flue section or missing parging, is written down before the liner goes up, so there are no surprises hidden behind it. Those findings are priced separately from the insert.
The baffle above the fire
Inside the top of a wood insert sits a baffle, a plate with insulation that holds the flames and gases in the firebox longer. One maker says not to operate the insert with the baffle or its insulation removed.
The same maker prefers removing the insert and pipe to clean and inspect, taking out the baffle only when that is not possible. We set the insert up so the baffle and connection can be reached, and show you the baffle's position so it is not left out after cleaning. A missing baffle shows as a fire that roars up the flue.
The top plate and cap in salt air
At the top of the chimney, the liner's top plate and rain cap sit in the open air, where salt carried from the coast settles on metal. Stainless steel resists that better than plain steel, but fasteners, cut edges and the cap's screen still deserve a look.
When we install an insert close to the coast, the plate and cap are fixed with the fasteners their maker supplies, and the sealant joint around the liner collar is checked on later visits. Any rust at the top is recorded on the ticket so it can be followed over the years.
Measured in Ponte Vedra Beach before an insert is ordered
- Top plate trimmed, seated and sealed, with a rain cap on the liner
- Damper locked open or removed, and what the manual lets us trim
- EPA Step 2 label read and the model and serial number recorded
- Separate lines for repairs, liner, insert, surround and cap
Before you order an insert
Will the insert need electricity?
Only for a blower, if the model has one. It plugs into a grounded outlet, and an electrician adds one where none is within reach.
Do you sell the insert or only install it?
We install to the insert's listing, and the estimate spells out which parts we supply, from the liner to the cap. Call (904) 920-5495 and tell us whether you already have a model for the fireplace in Ponte Vedra Beach.
More services in Ponte Vedra Beach
-
-
-
-
-
-
Learn more about wood-burning fireplace insert installationAll services in Ponte Vedra Beach
A wood insert that fits your Ponte Vedra Beach fireplace
Each insert fitted in Ponte Vedra Beach follows its listing, and your satisfaction is guaranteed.
Free Inspection