Local chimney flue repair in Palm Valley
Clay liners, mortar and flue size handled the way the code sets them out, on Palm Valley chimneys large and small.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local flue pros for Palm Valley chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Repair comes first when it will hold, and relining only when it will not.
- Free inspection and estimateThe flue at your Palm Valley home is swept, examined from both ends and mapped at no charge.
- 100% satisfaction guaranteedIf the repaired flue is not sound and correctly sized when we finish, we make it right.
- Family owned and operatedA family business maps the flue and does the repair, so the plan and the work stay in one set of hands.
Cracks that run up the tiles
Long cracks that run up the length of a tile, sometimes on two sides, often come from heat. A very hot fire in a cold flue heats the inner face faster than the outer one, and the tile splits.
A single hairline crack in a sound flue is a repair candidate. Several tiles split the same way, or pieces that have moved, lean the choice toward a new liner. We show you which pattern your flue has before pricing. Split flue tiles in your Palm Valley chimney? Phone (904) 920-5495; our specialists inspect for free.
Palm Valley runs along the Intracoastal Waterway. The county for Palm Valley is St. Johns County.
Flue repairs we handle in Palm Valley
- Flue swept, then examined from both ends
- Cracked and gapped sections coated with a listed resurfacing system
- Inlet thimbles and cleanout doors checked on appliance flues
- Every defect written down by height
Sweep, map, repair, check
-
Swept and examined
The flue is cleaned, then looked over from the roof and the firebox with a light and mirrors.
-
Mapped and measured
Each defect is placed by height and wall, and the flue size is checked against what it serves.
-
Repaired by the chosen method
Top tiles swapped from the roof, damaged sections coated with a listed system, or a relining price when repair will not hold.
-
Checked and cured
The finished flue is examined from both ends and left to cure before the first fire.
Cap metal near the ocean and the flue below
A few miles inshore, salt still reaches cap metal, and a rusted cap stops protecting the flue it covers.
For flue repairs in Palm Valley, we price a stainless cap where the old one has failed, so the repaired tiles stay dry.
10% off any service booked within 72 hours of inspection
From one cracked tile to a full relining, flue work in Palm Valley is discounted.
Masonry between neighboring flues
When a chimney carries two or more flues, R1003.13 puts a masonry wythe of 4 inches or more between neighboring linings, tied into the chimney walls. The divider keeps one flue's heat and gases out of the next, and it gives each flue its own draft.
Old chimneys sometimes have the divider cracked or missing. It matters more when the flues serve different appliances, since leakage between them can pull fumes into a flue that should be clean. We check each divider we can see and note where it is broken, because it changes whether repairing the tiles alone is enough.
The inlet where an appliance joins the flue
When an appliance connects to a masonry chimney, the code has the connector enter from the side, through a thimble of fireclay, refractory material or metal that keeps the connector from pulling out or poking past the liner wall (R1003.16).
A connector that pokes into the flue narrows it and snags deposits. A loose or cracked thimble leaks gases into the masonry around it. We check the inlet on any flue that serves an appliance and price a thimble repair as its own line, since it is often where condensate and heat have done the most harm.
Why a generic patch is not a flue repair
R1003.11.1 limits flue linings to four kinds: clay tile made to ASTM C315, lining systems carrying a UL 1777 listing, factory-built chimney sections whose listing allows installation within masonry, and other approved materials able to take flue gases and condensate up to 1,800 degrees Fahrenheit without corroding, eroding, softening or cracking.
A tube of fireplace patch or a bag of masonry mortar pushed into a crack from above meets none of those. It may hide the crack, but it does not restore a lining. So a flue repair from us means new tile bedded in refractory mortar, or a resurfacing system with its listing, and the estimate says which one.
Flue findings written down before pricing
- Sweeping needed before the flue can be judged, listed on its own
- Flue area measured against the fireplace opening or appliance connector
- Dividers between neighboring flues checked where they can be seen
- Waiting time before a fire, per the mortar or coat maker
Flue repair questions from Palm Valley
Can my water heater flue be repaired the same way?
Sometimes, but gas appliance flues follow the code's fuel gas chapter and the appliance's own venting rules. We read the appliance plate first and choose a repair or liner that suits it.
What does a flue inspection in Palm Valley cost?
The inspection is free, and the flue map with every defect and its price comes with it. Book the repair within 72 hours and you save 10% on it.
More services in Palm Valley
-
-
-
-
-
-
Learn more about chimney flue repairAll services in Palm Valley
Repair cracked flue tiles in Palm Valley
Our flue pros sweep, map and price every defect in your Palm Valley flue. Call (904) 920-5495.
Free Inspection