Hearth repair in Palm Valley, from the base up

Stone slab broken in two? Our Palm Valley hearth pros tell you whether it bonds or needs replacing, free.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local hearth repair pros for Palm Valley homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Old stone is glued when a clean break allows it and replaced when it does not.

Free inspection and estimateYour hearth in Palm Valley is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

A fireplace coming back into use

A fireplace that sat unused for years can have a hearth that looks fine and still needs work: tile that let go quietly, a cleanout door that no longer closes, or an extension that was built short. None of it shows until the fire is lit and embers start to fly.

Before the first fire in Palm Valley, we check the hearth along with the firebox and damper, and the estimate gives the hearth findings their own section. The visit is free, and a local family business stands behind the work.

At the 2020 Census, Palm Valley was home to 21,827 people. Palm Valley is near the coast without touching it.

What our hearth crew fixes in Palm Valley

Loose brick on the hearth relaid in fresh mortar
Crumbling grout raked out and renewed
Wood flooring cut back from the ember zone
Ash dump frames and lids reset or replaced

Call (904) 920-5495 Free Inspection

From the first tap to the first fire in Palm Valley

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Screen anchors near the water in Palm Valley

Palm Valley is near the coast, and chlorides in marine air can reach the steel anchors that hold a screen or door frame to the hearth. A rusted anchor lets the frame rock, and a rocking frame chips the tile around it.

For a hearth in Palm Valley, rusted anchors are replaced with corrosion-resistant ones, and the estimate names the metal of each part we fit.

10% off any service booked within 72 hours of inspection

For your Palm Valley home, hearth work agreed within 72 hours of the visit comes 10% off.

Call (904) 920-5495 Free Inspection

Four inches under the fire, two in front

Two slab thicknesses apply at a masonry fireplace. Under the fire, the hearth slab needs 4 inches or more of concrete or masonry. The apron in front, the extension, needs 2 inches or more. Both rest on noncombustible support and carry reinforcement for their own weight and whatever stands on them.

Those numbers matter most when a hearth is rebuilt rather than patched. A new extension poured thinner than 2 inches to meet a floor height does not meet R1001.9.2, however neat the tile on top looks. When the floor height and the slab thickness disagree, the estimate says how the difference is handled.

Setting materials chosen for the heat

The strip of extension near the opening can get hot during a long fire, while the far edge stays at room temperature. Setting mortars, grouts and sealants each list their limits on their data sheets, and a product that is fine on a bathroom floor may not be rated for the zone closest to the fire.

We choose the setting material and grout from their data sheets for the heat they will see, and write the product names on the ticket. Inside the firebox, where the fire sits, the floor is firebrick in refractory mortar rather than tile products, which keeps each material inside its limits.

Keeping the ember zone clear

The extension exists to catch sparks, embers and a rolling log on a floor that will not burn. A rug, a wood box or a stack of newspaper set on it puts fuel back in that zone. Fireplace screens and doors help, but they do not change what the floor in front is for.

At the walk-through we point out the full required extension so you can see where the clear zone ends. Tools with wooden handles and a log holder belong beside it rather than on it. A strip of painter's tape along the line for the first few fires helps everyone in the house learn it.

Tile, slab, support and size, in writing

Grout raked and renewed, product and color written down
Seam at the firebox cleaned and refilled with a heat-suited material
Ash dump frame reset in refractory mortar and lid fit checked
Water source above the hearth named and priced as its own line

Hearth repair questions from Palm Valley

Can my hearth be made bigger without tearing it out?

It can when the existing slab is sound. An addition on proper support, joined cleanly to the old slab, brings the size up, and new tile across both hides the seam. The estimate shows the new outline.

Will you match my stone or tile?

We look for the closest available match first and tell you plainly how close it is. If no match exists, we suggest a salvage spot or a deliberate contrast, and you choose before anything is removed.