
Chimney masonry repair in Nassau Village-Ratliff by local masons
The four-inch wall and the air gap to framing stay intact when our local masons repair your Nassau Village-Ratliff chimney. Inspections are free.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Brick and mortar specialists for Nassau Village-Ratliff chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Your Nassau Village-Ratliff estimate carries a map of each damaged area with its cause written beside it.
- Locally ownedA locally owned business answers for the brick and mortar work on your Nassau Village-Ratliff chimney.
- Upfront pricing, no hidden feesEach area of the stack is priced on its own line, so you can see what each repair costs.
- 100% satisfaction guaranteedIf the repair does not look or hold the way we agreed, we come back and make it right.
How our masonry estimate is laid out
Each masonry estimate we write for your Nassau Village-Ratliff chimney follows the same order. First, what we found and where, with sizes. Second, the cause of each problem, and the repair that removes the cause. Third, the masonry work itself: joints, units, courses and shoulders, with the mortar type and the brick source. Fourth, what can wait and what to watch in the meantime.
Prices sit beside each line, so you can choose to do part of the work now and part later without losing track of what was found. Nothing is started until you have read it and agreed to it. We check Nassau Village-Ratliff brick and mortar at no charge; call (904) 920-5495 to book.
The county for Nassau Village-Ratliff is Nassau County. At the 2020 Census, Nassau Village-Ratliff was home to 5,561 people.
What our masonry work covers in Nassau Village-Ratliff
- Every damaged area mapped on the stack by type
- Mortar smears cleaned off without raw acid
- Stair-step cracks marked and measured on your Nassau Village-Ratliff chimney
- Fresh joints covered from rain at your Nassau Village-Ratliff home
From damage map to cured joints in Nassau Village-Ratliff
-
Damage mapped by type
Soft joints, cracks, flaking faces and loose courses are marked on the stack, along with the water path behind them.
-
Mortar and brick matched
The mortar type is picked to suit the old wall, a test batch cures against the brick, and replacement units are sized to the coursing.
-
Rake, repoint and replace
Joints are raked to sound mortar and packed in layers, and damaged brick is cut out and reset.
-
Tooling, cleanup and cover
New joints are tooled to the old profile, smears come off without raw acid, and fresh work is covered from rain.
What loosens brick and mortar in Nassau Village-Ratliff
Inland chimneys in Nassau Village-Ratliff face less salt exposure. Rain is the main load. Water that runs off a failed crown or enters an open joint washes mortar out from the inside.
Repairs in Nassau Village-Ratliff close the water path first, then repoint and replace brick.
10% off any service booked within 72 hours of inspection
Loose brick or crumbling mortar? Book within 72 hours of our visit and 10% comes off.
A stack pulling away from the house wall
A chimney built against a house is meant to move with it and stay against it. BIA's residential chimney note calls for single-wythe chimneys to be attached to the structure with corrosion-resistant metal ties at a set spacing. If those ties rust through, or were left out when the chimney was built, the chimney can separate from the wall, opening a gap at the top. The repair depends on the cause: new ties, work at the footing, or rebuilding the separated section.
We measure the gap at several heights and record it, and structural questions go to an engineer. Where the stack meets the siding, the joint is closed to weather at the face without filling the air space the code requires behind it.
Keeping the wall at its code thickness
Florida's residential code sets a minimum thickness for the walls of a masonry chimney: 4 inches nominal, built of solid units or of hollow units grouted solid. That minimum does not relax during a repair.
When a brick is cut out and replaced, the new unit fills the full depth of the old one, and the joints around it are packed full. Thin slips of brick glued to the face, or a pocket left half empty behind a new face, would thin the wall. We cut out and replace full units so the stack keeps its required thickness everywhere we have worked on it.
The key test for soft mortar
A house key or a small screwdriver is enough to test a mortar joint. Drag it along the joint with firm pressure. Sound mortar resists and leaves a shallow scratch; spent mortar crumbles, and sand runs out onto your hand. The test is useful from inside an attic or at the base of a chimney you can reach safely.
Joints that fail it need raking and repointing, and the pattern of where they fail, all over or just on one face or near the top, tells us where water has been getting in. Telling us what you found when you call helps us plan the visit.
Mortar type, brick source and joint depth
- Crack readings: width, direction, and whether it is still moving
- Shoulder and wash condition, with the repair for each
- Water entry points found, and the repairs that close them
- Items that can wait, with what to watch in the meantime
Masonry questions from Nassau Village-Ratliff
My Nassau Village-Ratliff chimney has loose brick. Can you help?
Yes. Masonry repair is part of our work in Nassau Village-Ratliff, and a visit starts with a look at every face of the stack. Book by phone or through the form.
Can the masonry work go ahead while I am out?
Yes, for work on the outside of the chimney, as long as the roof is safe to reach. For a look from the attic or into the fireplace, someone needs to be there to let us in.
More services in Nassau Village-Ratliff
-
Ventless Gas Fireplace Service Oxygen depletion sensor pilots, burners and logs on vent-free units.
-
Smoke Chamber Repair Stepped, cracked or unparged smoke chamber brick made smooth and sound.
-
Chimney Sweep and Chimney Cleaning Soot and early creosote brushed out of the flue, smoke chamber and firebox.
-
Electric Fireplace Installation Wall-mount, recessed and insert electric fireplaces, installed to the manual.
-
Gas Fireplace Installation Direct-vent and B-vent gas fireplaces, framed and vented to the manual.
-
Top-Sealing Damper Installation A gasketed damper fitted at the flue top to replace a failed throat damper.
Learn more about chimney masonry repairAll services in Nassau Village-Ratliff
Crumbling mortar, free look
Mortar that crumbles under a key is worth a call to (904) 920-5495, and our masonry experts check the joints on each side of the chimney in Nassau Village-Ratliff.
Free Inspection