Local chimney cap replacement in Middleburg
Every flue measured at a free inspection, then a cap for your Middleburg roof that sheds rain, stops embers and still lets the fire draw.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local cap experts for Middleburg chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Birds, rain and embers are all kept out by one cap, and it still leaves room for the fire to draw.
- Free inspection and estimateWe measure every flue on your Middleburg chimney at no charge before any cap is ordered.
- Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
- Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.
Flues that vent other appliances
Not every flue in a masonry chimney serves a fireplace. Some carry exhaust from a heating appliance or a water heater, and those appliances come with venting instructions that govern what may sit on top of their flue.
Before a cap is chosen for your Middleburg chimney, we confirm which appliance connects to each tile, working from the appliance labels and the connector pipes. The cap for each flue then follows the matching instructions, and which flue serves what is written down. A later contractor reading that record does not have to guess which tile belongs to which appliance. Cap rusted, bent or gone in Middleburg? Our cap pros inspect it for free at (904) 920-5495.
Census takers counted 12,881 people in Middleburg in 2020. Middleburg is inland.
Cap replacement work for Middleburg homes
- Every flue tile measured inside and out
- Fasteners in a metal that matches the cap
- Lid or screen that comes off for the sweep
- Metal grade for your Middleburg chimney named in writing
From tile measure to fastened cap in Middleburg
-
Tiles measured on the roof
Each flue tile is measured inside and out, along with its height above the crown.
-
Cap style and metal chosen
Slip-in, band-mount or full-crown, in a metal suited to the roof, with a screen that meets the Florida code.
-
Flue cleared, cap fastened
Any nest or debris comes out of the flue, then the cap is set and fastened for wind.
-
Fit and screen checked
We check that the cap sits square, the hood height matches the chart and the screen comes off for the sweep.
What wears out caps in Middleburg
For caps at an inland home in Middleburg, rain, soot and wind guide the inspection. Mesh rusts where water lingers, soot clogs the screen, and set screws loosen.
The fix is a cap sized to the tile, in a metal that suits the roof, fastened by the maker's method.
10% off any service booked within 72 hours of inspection
Say you want the 10% off when you book the cap, and we note it.
A flue serving a furnace or water heater
When a masonry flue carries exhaust from a heating appliance or water heater, that appliance's installation instructions govern the vent, including what may sit on top of it. Those instructions can call for a particular cap type or rule out a fine screen, because mesh on an appliance flue can collect debris and restrict the exhaust. We identify the appliance on each flue before choosing a cap, follow its instructions, and record which cap went on which flue. If the appliance vents through its own metal pipe running inside the chimney, that pipe stays with the termination its own maker specifies, and we leave it as it is.
Metal chimneys take their maker's listed cap
A metal chimney that serves a factory-built fireplace was tested as a system, and its top cap was part of that test. The fireplace manual names the termination that belongs on it, by model.
A masonry-style cap clamped onto that pipe is outside the listing, and it can change how the chimney draws and how its layers stay cool. So when the cap on a metal chimney is damaged, the replacement comes from the chimney's maker for that model, ordered by the numbers on the fireplace plate. The framed box around such a chimney has its own sheet-metal top, which is a separate part with its own price.
Clearing nest material before capping
Putting a cap on over an old nest traps the problem inside. Twigs, leaves and droppings on the smoke shelf block the draft and can catch fire from the first ember that reaches them. So the flue is cleared from the top and the shelf is cleaned from below before a new cap goes on.
If an animal is still inside, it has to come out first, and that is a separate job, priced on its own. The room below is covered while the debris comes down. The cap is the final step, the one that keeps the cleared flue clear, and it goes on as soon as the clearing is finished, the same day when the cap is already on hand.
What sets the cap on your estimate
- Old cap and its fasteners taken off the roof
- Nest, debris or animal removal needed before the cap goes on
- Fastener metal matched to the cap to avoid galvanic corrosion
- Clean-up of old metal, screws and debris from the roof and yard
Cap questions we hear in Middleburg
Should the replacement cap match the old one's size?
Only if the old one fit. We size from the tile and crown as they are now, using the maker's chart, and the estimate lists the measurements.
Do you install caps on metal chimneys?
Metal chimneys from a fireplace maker take the cap that maker lists for the system, so a replacement comes from the same maker. We identify the model before ordering anything.
More services in Middleburg
-
-
-
-
-
-
Learn more about chimney cap installation and replacementAll services in Middleburg
Book a cap check this season
Our cap pros measure every flue on your Middleburg chimney and write the cap and metal down. Call (904) 920-5495.
Free Inspection