Local chimney inspection in Middleburg

A free inspection of the chimney, fireplace and vents in your Middleburg home, checked as one system and explained before we leave.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Inspection pros who explain every finding in Middleburg

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

When a finding belongs to another trade, it is flagged in writing with who to call.

Free inspection and estimateThe chimney inspection at your Middleburg home costs nothing, and a clean result is reported as clean.
Locally ownedA locally owned business shows you what it sees, so the findings are yours to check.
No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.

Call (904) 920-5495 Free Inspection

Ahead of relining

NFPA 211 names relining as a moment for a deeper examination, with good reason: a liner is sized, chosen and installed around what the chimney already is. The inspection measures the flue, notes offsets and obstructions, checks the smoke chamber and the masonry the liner will depend on, and confirms what the new liner will serve.

Liner instructions call for sound masonry first, so any masonry repair the inspection finds is listed ahead of the liner. The Middleburg relining estimate is then built on measured facts instead of assumptions. Measurements taken here carry straight into the liner order. Starting the season in Middleburg? Call (904) 920-5495 and book the inspection before the first fire.

Middleburg had 12,881 residents at the 2020 Census. Middleburg lies inland.

What a chimney inspection covers in Middleburg

Damper worked through its full travel
Deposit in the flue graded
Crown, cap and flashing checked from the roof
Brick and joints above the roofline looked over

Call (904) 920-5495 Free Inspection

How our inspection pros check a chimney in Middleburg

The reason noted first
We ask why you want the inspection, whether a sale, a new stove, a storm or a smell, and plan around it.
Firebox up to the flue
Firebrick, hearth, damper, smoke chamber and flue tile are checked with a strong light from below.
Roof and attic next
Crown, cap, flashing and brick are checked from the roof where safe, and clearances from the attic.
Findings explained on site
We go over each finding with you on site, and any repair gets its own price.

A fireplace unused for years in Middleburg

A fireplace that has not been lit in years may hide nests, fallen tile or a damper rusted shut.

Before the first fire in a home like that in Middleburg, the inspection checks every part from the firebox to the cap.

10% off any service booked within 72 hours of inspection

Nothing to pay for the inspection, and a sweep booked alongside it gets the discount.

Call (904) 920-5495 Free Inspection

The airspace around a chimney in the attic

The code keeps wood framing at least 2 inches from a masonry chimney that runs inside the house or within an outside wall, and at least 1 inch from one that stands wholly outside the walls (FBC R1003.18). The attic is the easiest place to see whether that gap exists.

Insulation packed against the brick, a joist nailed tight to the chimney, or roof sheathing that touches it all get noted. So does darkened or charred wood near the stack, which is evidence that heat has been reaching it. Where the attic cannot be entered, the findings say so. Boxes stored against the chimney are pointed out as well.

The thimble in the chimney wall

A thimble is the sleeve a connector passes through to enter the chimney from the side. The code wants it made of fireclay, rigid refractory or metal, and fitted so the connector cannot pull out of the inlet or reach past the inner face of the liner (FBC R1003.16).

The inspection checks that the thimble is intact, tight in the masonry and at the right height for the stove. Cracked or crumbling thimbles, or a connector poking into the flue where it catches deposit, are noted, along with how close the thimble sits to any wood framing. An open thimble with no connector in it is noted too, since it lets room air into the flue.

Flashing where the chimney meets the roof

The joint between chimney and roof is covered by two layers of metal: base or step flashing worked in with the roofing, and counterflashing let into the brick that laps over it. The inspection looks for counterflashing pulled out of its joint, sealant used in place of a proper lap, gaps at the corners, and rust or holes in the metal.

The code covers roof flashing in its roofing chapter, chapter 9 of the Residential volume, alongside the roofing maker's details. The findings describe the flashing only; the condition of the roof covering itself is left to a roofer. Loose or missing counterflashing is measured along each side of the stack.

Checked on every inspection in Middleburg

Smoke chamber walls examined for gaps, loose courses and deposit
Factory-built listing label read and parts compared with the manual
Written estimate listing each finding, its repair and its urgency
A plain list of anything that could not be reached, and why

Before your chimney is inspected

How long does a chimney inspection take?

A single fireplace with roof and attic access fits in part of a morning or afternoon. Extra flues, a stove connector, or a deeper look before a sale or after a chimney fire add time, and the booking call gives you a window.

Will you need to get into the attic?

If the chimney passes through an attic, yes, because the attic is where clearances to framing and fireblocking can be seen. If there is no safe access, the findings say what could not be checked.