Call(904) 920-5495

Electric fireplace repair for Mayport homes

Wall units, recessed units and inserts in Mayport repaired under our workmanship warranty, with parts matched to the label.

  • Fully licensed and insured
  • Locally owned
  • Family owned and operated
  • Same-day service

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Family-owned repair experts serving Mayport

  • Locally owned in Jacksonville
  • Family owned and operated
  • 100% satisfaction guaranteed
  • Free inspection and estimate
  • Same-day service available
  • 10% off any service

Outlet and circuit faults go to an electrician, with that work named apart.

  • Free inspection and estimateYour Mayport unit is tested part by part, from the outlet to the board, at no charge.
  • 100% satisfaction guaranteedIf the repaired unit does not heat, light and respond as its manual says, we return and put it right.
  • Family owned and operatedThe family crew that traces the fault in your unit is the crew that repairs it.

A thermostat that will not hold

Set to a temperature, the heater should cycle on and off to hold it. If it runs flat out and never stops, or clicks on and off every few seconds, the thermostat or its sensor may be at fault. A thermostat sensor blocked by trim or furniture can misread the room too.

We check the setting, the sensor's position and the thermostat's response, then replace the failed part. A unit mounted where its sensor sees warm air from the heater itself can also misread the room, and that is a placement issue we can explain. Temperature control acting up in Mayport? Phone (904) 920-5495 for a free inspection.

Mayport is one of the named neighborhoods of Jacksonville. Mayport is in Duval County.

Heater, flame, board and remote

  • Heater elements tested and replaced
  • Inserts pulled out, repaired and refitted
  • Wall units lifted off and rehung level
  • Airways cleaned of dust and pet hair

How electric fireplace repair runs

  1. Model number first

    Read us the rating label, and parts availability is checked before the visit.

  2. Supply, then each part

    The outlet and breaker are checked, then heater, fan, flame effect, board and remote are tested in order.

  3. Failed part replaced

    The maker's part for your serial number is fitted, with any electrician work done separately.

  4. Retested with you

    Heat, flames, remote and thermostat are run through their settings before we leave.

10% off any service booked within 72 hours of inspection

Fixing an electric fireplace at your Mayport home? The repair keeps our workmanship warranty with 10% off the price.

Tracking down a new noise

Electric fireplaces make a gentle fan hum and a faint motor sound from the flame effect. A new grinding, ticking, buzzing or rattling noise is worth tracking down before it gets worse.

We run each part on its own to isolate the sound. Grinding usually means fan bearings. Ticking can be a fan blade touching its housing or expansion of metal parts as they heat. Rattling can be a loose panel or bracket. Buzzing near the lights or board can point to a failing component. Each has its own fix. Some sounds are normal, and we tell you which ones so you are not worried by them later.

Working within the maker's warranty

Electric fireplaces come with a maker's warranty, and its terms decide how a repair should be handled while it applies. Some makers supply parts free under warranty. Others require repairs through their own service arrangements or ask for proof of purchase.

We ask about the purchase date and check the warranty terms before starting, so a repair does not cost you coverage. Where the maker supplies the part, we fit it. Our own workmanship warranty covers the work we do, and the paperwork shows both. If the warranty requires the maker's own technician, we tell you and step back.

Bringing a unit back after an outage

After a power outage, some electric fireplaces come back on their own and some need help. The main switch may need cycling, the remote may need re-pairing and the thermostat settings may have reset.

The manual gives the steps for your model, and we work through them first. If the unit still does not respond, we test the internal fuse and the board. A unit that fails after an outage is not always damaged, and checking the simple steps first can save a part. We note the reset steps for your model on the invoice for next time.

What we test on units in Mayport

  1. Connectors inside the unit checked for fit and heat marks
  2. Intake and fan cleaned of dust and pet hair
  3. Insert, wall unit or recessed unit removal allowed for
  4. Every function retested with you before we leave

Before a part is ordered

Do you repair electric fireplaces in Mayport?

Yes. Our specialists repair electric fireplaces of every mounting type in Duval County, Mayport included. Keep the rating label handy on the phone so parts can be checked before the visit.

Can an electric insert in an old fireplace be repaired?

Yes. The insert is slid out onto the hearth, tested and repaired there, then set back with its cord checked and its trim refitted.

Bring back the heat in your Mayport electric fireplace

Once the heater, flames and remote work again in Mayport, our satisfaction guarantee stays behind the repair.

Free Inspection

Call the chimney and fireplace experts

(904) 920-5495

Free inspection and written estimate

Call (904) 920-5495