Chimney inspection in Lake Geneva by local experts

Tell us what changed at your Lake Geneva house, a new stove, a storm, a sale, and the free inspection is shaped around it.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Inspection pros who explain every finding in Lake Geneva

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Gas vents and stove connectors are followed end to end, since they share the chimney.

Free inspection and estimateThe chimney inspection at your Lake Geneva home costs nothing, and a clean result is reported as clean.
Locally ownedA locally owned business shows you what it sees, so the findings are yours to check.
No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.

Call (904) 920-5495 Free Inspection

What an inspection leaves out

An inspection observes and records. It leaves the flue unbrushed unless a sweep was booked, and it repairs nothing, even small items, so the findings stay separate from any sale. It does not judge the roof covering beyond the chimney's own flashing, which is a roofer's field.

A gas appliance itself is serviced separately, to the maker's manual, and nothing sealed is opened without your go-ahead. If a finding needs a specialist outside chimney work, it is flagged as such. Knowing the edges of the job helps you read the Lake Geneva findings for what they are. Our inspection pros cover Lake Geneva; call (904) 920-5495 and the visit is free.

The county for Lake Geneva is Clay County. Lake Geneva sits away from the coastline.

What a chimney inspection covers in Lake Geneva

Damper worked through its full travel
Attic airspace and fireblocking checked where reachable
Factory-built units checked against their listing label
Findings for your Lake Geneva home explained on site

Call (904) 920-5495 Free Inspection

Ask, look up, look down, explain

The reason noted first
We ask why you want the inspection, whether a sale, a new stove, a storm or a smell, and plan around it.
Firebox up to the flue
Firebrick, hearth, damper, smoke chamber and flue tile are checked with a strong light from below.
Roof and attic next
Crown, cap, flashing and brick are checked from the roof where safe, and clearances from the attic.
Findings explained on site
We go over each finding with you on site, and any repair gets its own price.

Hearth and trim in Lake Geneva homes

The hearth extension has to reach a set distance in front of and beside the opening, and wood trim has to keep its distance too.

During an inspection in Lake Geneva, both are measured against the size of the opening.

10% off any service booked within 72 hours of inspection

The inspection in Lake Geneva is free, and a repair it turns up is 10% off if booked within 72 hours.

Call (904) 920-5495 Free Inspection

Open joints between flue tiles

Clay flue tiles are set end to end in refractory mortar, and the code wants those joints tight and smooth inside (FBC R1003.12). Over time the mortar erodes and a gap opens. Through it, heat reaches the brick behind the tile, and flue gases and condensate soak into the masonry.

Gaps show as dark rings around the tile, or as missing mortar when the flue is viewed with a strong light. A single open joint near the top is a different finding from open joints along the whole flue, and the finding states which one this is. Joints just above the smoke chamber get extra attention, since they meet the hottest gases.

The thimble in the chimney wall

A thimble is the sleeve a connector passes through to enter the chimney from the side. The code wants it made of fireclay, rigid refractory or metal, and fitted so the connector cannot pull out of the inlet or reach past the inner face of the liner (FBC R1003.16).

The inspection checks that the thimble is intact, tight in the masonry and at the right height for the stove. Cracked or crumbling thimbles, or a connector poking into the flue where it catches deposit, are noted, along with how close the thimble sits to any wood framing. An open thimble with no connector in it is noted too, since it lets room air into the flue.

Every flue in the stack, including the idle ones

NFPA 211 has the yearly inspection take in every flue in the chimney and every appliance connected to it, including ones rarely used. A second flue that once served a furnace or a closed-off fireplace can hold nests, fallen tile or water damage with no one watching.

The code also wants a masonry divider, a wythe of 4 inches or more, between flues in the same chimney (FBC R1003.13), and a missing or crumbled wythe lets smoke cross from one flue into another. Each flue is recorded by what it serves, or that it serves nothing. Unused flues get their caps checked too.

Firebox, flue, roof and attic

Firebrick, mortar joints and back wall checked for cracks that pass through
Damper opened and closed through its travel, with seal and frame noted
Gas appliance vent path traced for blockage, separation and rust
A plain list of anything that could not be reached, and why

Inspection questions from Lake Geneva

How long does a chimney inspection take?

A single fireplace with roof and attic access fits in part of a morning or afternoon. Extra flues, a stove connector, or a deeper look before a sale or after a chimney fire add time, and the booking call gives you a window.

Will you need to get into the attic?

If the chimney passes through an attic, yes, because the attic is where clearances to framing and fireblocking can be seen. If there is no safe access, the findings say what could not be checked.