Hearth repair in Lake Geneva, from the base up

An extension too small for the opening gets measured to code in Lake Geneva and priced on a free inspection.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Hearth experts who measure before they tile

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Stone and tile go down on full beds, which is why they stay solid under a tap.

Free inspection and estimateYour hearth in Lake Geneva is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

Burn marks on the floor past the hearth

Small dark spots on a wood floor or rug a short way past the hearth are ember marks. They say the extension is not deep or wide enough for the fire being built, or that the screen is not closing the opening. Either way, the floor is taking heat the hearth was built to take.

Your opening and extension in Lake Geneva get measured, and the ticket says whether the fix is a larger extension, a better screen or both. Local hearth specialists, a free inspection, and one call to (904) 920-5495.

Lake Geneva sits in Clay County. Lake Geneva does not reach the coast.

Hearth repair work we take on in Lake Geneva

Hollow tiles found by sound and reset
Undersized extensions enlarged to the code size
Ash dump frames and lids reset or replaced
Heat-cracked tile near the opening rebedded

Call (904) 920-5495 Free Inspection

Sound, measure, rebed, cure

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Support and settling under a hearth in Lake Geneva

Away from the coast in Lake Geneva, a hearth's trouble starts with its support and with heat. A slab that settles, or a setting bed that shrinks away from the tile, shows up as cracks and hollow sounds.

We sound and level the hearth first, so the estimate for your home in Lake Geneva fixes the cause as well as the surface.

10% off any service booked within 72 hours of inspection

A hearth in Lake Geneva measured short of code can be extended, and that job is discounted too.

Call (904) 920-5495 Free Inspection

Adding depth or width to a short extension

A hearth that falls short of R1001.10 can sometimes be extended rather than rebuilt. The addition needs the same noncombustible support and thickness as the rest, and a clean joint with the old slab so the two do not crack apart. The finish then runs over both and hides the seam.

Extending changes the floor around it, so the estimate covers the flooring cut and the new edge trim as well. On a raised hearth, extra depth may mean a floor-level strip in front of the platform. We draw the layout so you see it before anything is cut.

Where flooring and trim may meet the hearth

Combustible trim and flooring edges may touch the hearth extension, but only far enough from the fire. R1001.11 allows sheathing and trim edges to butt against the extension once they are 12 inches or more away from the firebox lining. Inside that distance, the material has to be noncombustible.

A wood floor that butts against the front edge of a full-size extension is normally past that distance. A strip of wood along the side of a narrow extension may not be. We measure those distances on every hearth job and note them on the ticket, so a flooring change later does not undo them.

Sealing a natural stone hearth

Porous stone near a fire absorbs soot, ash and spills. A penetrating sealer slows that down without forming a film that could scorch or peel. The maker's data sheet sets the surface preparation, the dry time and how often it is reapplied.

Sealer goes on only after the repair has cured, and only on stone and grout that the product lists. Some dense stones take almost none. We note the product and the date on the ticket, so the next application follows the same data sheet instead of a guess, and the finish stays even across the old and new stone.

Tile, slab, support and size, in writing

Support under the extension identified, from below where access allows
Flooring or trim inside the clear zone cut back, installer named
Ash dump frame reset in refractory mortar and lid fit checked
Cure time before the first fire, written with the finish date

Hearth repair questions from Lake Geneva

Do you replace only the cracked tiles or the whole hearth?

Only the cracked ones when the slab under them is sound and the tile can be matched. If the slab has moved or the extension is too small, we explain why a bigger repair makes sense and price both.

When can I light a fire on the repaired hearth?

That depends on the setting materials, and each product's data sheet gives a cure time before heat. We write that time on your ticket along with the date the work was finished.