Fireplace damper repair for Kings Ferry fireplaces

Dampers that rattle, stick or leak in Kings Ferry, repaired by a local family crew under our workmanship warranty.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local damper pros for Kings Ferry fireplaces

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Local and family owned, we come back for the same damper if anything about the repair slips.

Free inspection and estimateYour Kings Ferry damper is run through its full travel and checked with a light at no charge.
100% satisfaction guaranteedIf the repaired damper does not open fully and close flat, we come back and make it right.
Family owned and operatedA family business does the diagnosis and the repair, so the person who quoted it answers for it.

Call (904) 920-5495 Free Inspection

A fireplace with no damper at all

Some fireplaces reach us with an empty throat: the damper was removed at some point, perhaps to make room for something that has since gone. With nothing to close, the flue stays open to the room all year.

Under the residential code, a masonry fireplace gets an iron or steel damper that can be worked from the room. We look at the throat to see whether a new throat damper can be set there, or whether sealing the flue from its top end is the practical route. Open throat with no damper in Kings Ferry? Call (904) 920-5495, and the first inspection is free.

The county for Kings Ferry is Nassau County. Kings Ferry sits away from the coastline.

Plate, frame, pivots and control

Broken handle links and rivets reconnected
Warped or holed plates replaced to fit the frame
New damper set at the height the code asks for
Full travel and seal tested with a light

Call (904) 920-5495 Free Inspection

From the first light test to a sealed plate in Kings Ferry

Handle and plate tested
With the fireplace cold, the control is worked through its travel and the plate checked from below with a light.
Failed part named
Pivots, plate, frame or control, the part that failed is written down with the repair options and prices.
Freed, rehung or replaced
Sound parts are cleaned and freed, a plate is matched to its frame, or a new damper is set at code height.
Travel and seal confirmed
The plate must open fully and close flat under the light before the job is done.

Draft through a leaky damper in Kings Ferry

A cooled room loses air through a damper that no longer seals, and that happens wherever the house is. Inland or not, the fix starts with the seat and the plate.

On visits in Kings Ferry we show you the gaps with a light from below, then price the part that closes them.

10% off any service booked within 72 hours of inspection

Damper stuck or leaking air? Book the fix up to 72 hours after the inspection and save 10%.

Call (904) 920-5495 Free Inspection

Cast iron plates and stamped steel plates

Throat damper plates come in two broad kinds. Heavy cast-iron plates hold their shape well under heat and rust slowly because of their thickness. Stamped steel plates are lighter and cheaper to make, and they give less warning before rust eats through them.

Both are ferrous metal, which is what the code asks for. The difference shows up in the repair: a cast plate that has only scaled can usually be cleaned and kept, while a thin steel plate with pitting along the edge rarely justifies the effort. We name which kind you have on the estimate, because it decides whether freeing it is worth the labor.

Cleaning the seat the plate closes on

The seal forms where the plate lands on the frame's lip, and that lip collects rust scale and soot crust. A few layers of scale are enough to hold the plate off its seat, so a sound plate can leak like a warped one.

Cleaning the seat back to metal is part of every damper visit. We scrape and brush the lip, clear the corners where scale gathers, and close the plate again with a light below to see whether the gap has gone. If it has, the plate stays. If the gap stays after a clean seat, the plate or the frame has lost its shape.

What we check before calling the damper done

Four things have to be true before a damper repair counts as finished. The handle or crank moves the plate through its full travel without force. The plate reaches its fully open position and stays there. It closes flat on its seat with no gap visible under a light. And the handle positions are clear to whoever lights the next fire.

We run those checks with you watching, before we pack up. If any one of them fails, the job is not finished, and we say what is still needed. The result is written on the invoice, with the parts used, so the next inspection starts from a known condition.

Damper findings written down before pricing

Full travel measured, with where the plate stops and why
Replacement plate matched by frame size, pivot style and handle lug
Frame replacement scope: firebrick disturbed and refractory mortar used
Rain entry above the damper, with a flue cap priced separately

Damper questions from Kings Ferry homeowners

Can a rusted damper be saved?

Often, when the rust is on the surface and the pivots still have their metal. A plate that has thinned, holed or warped is replaced. We grade it on the visit and show you what we found.

What does the damper visit in Kings Ferry cost me?

The inspection is free, and the repair is priced in writing before any work. Book the damper job within 72 hours of that inspection and 10% comes off as well.