Firebox repair in Julington Creek Plantation

Checked cold, wall by wall, on a free inspection, then repaired with the materials the code names: firebox work done right in Julington Creek Plantation.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Firebox experts for Julington Creek Plantation fireplaces

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The damper, smoke chamber and hearth are named on separate lines, kept apart from the firebox price.

Free inspection and estimateEvery wall of the firebox in Julington Creek Plantation is tapped and probed cold, and the failed bricks and joints are marked at no charge.
Upfront pricing, no hidden feesEach wall is quoted for what it needs, a few joints, a few bricks or a full reline, so a small repair stays small.
100% satisfaction guaranteedIf a joint we repointed opens again after it has cured and been used as the ticket says, we come back and redo it.

Call (904) 920-5495 Free Inspection

Chipped bricks at the front edge

The firebricks at the front edge of the firebox, along the sides of the opening, take knocks from fire tools, the grate and logs going in. Chipped corners there look worse than they are, but an edge brick missing a thick chunk leaves the joint behind it exposed to the fire.

We replace edge bricks that have lost real depth and leave shallow chips alone, and the estimate says which is which so you are not paying for cosmetic work you did not ask for. Front-edge firebricks chipped in your Julington Creek Plantation fireplace? Book the free check at (904) 920-5495.

Julington Creek Plantation is in St. Johns County. Julington Creek Plantation is an inland community.

Joints, firebrick, walls and floor

Cracked firebrick replaced to size, one brick at a time
Hollow-sounding bricks reset in a full mortar bed
Gaps along the base of the walls repointed
Firebox rebuilds that keep the throat and depth to code

Call (904) 920-5495 Free Inspection

How our firebox pros repair a fireplace in Julington Creek Plantation

Keep the firebox cold
Let the fireplace go unused for several hours ahead of our visit, so each wall is cool to the touch.
Tap, probe and mark
Each brick is sounded, each joint probed, and the failed ones marked and written up by wall.
Rake, rebrick or reline
Joints are raked and repointed, failed bricks replaced and worn walls relined in C199 mortar.
Cure date on the ticket
The mortar maker's drying time sets the date of the first small fire, written down before we leave.

A firebox worn by years of use in Julington Creek Plantation

Away from the shore, a firebox in Julington Creek Plantation ages at the pace of its fires. A lining that has carried many seasons can be thin across the whole back wall rather than failed in spots.

We measure what remains and quote a reline where patching would not last.

10% off any service booked within 72 hours of inspection

Cracked firebrick? Book the repair inside 72 hours of our visit and save 10%.

Call (904) 920-5495 Free Inspection

Relining without making the firebox too shallow

For a conventional masonry fireplace, the Florida code sets a minimum firebox depth of 20 inches. A new lining laid in front of an old one takes that depth away, so a reline is not a matter of simply adding brick to the face.

Before writing a relining, we measure the depth from the opening to the back wall and work out what the new lining would leave. Where the old lining has to come out first to keep the depth, the estimate says so and prices the removal as its own step. A shallower firebox also pushes the fire closer to the room, which is one more reason to keep the depth.

Replacing a single firebrick

Replacing one firebrick starts with cutting the joints around it without disturbing its neighbors. The old brick comes out in pieces if it must, the opening is cleaned back to sound mortar and the dust is cleared out.

The new firebrick is cut to size and set in a full bed of medium-duty refractory mortar on every side, with joints no wider than the code allows and its face flush with the wall around it. A neighbor that loosens during the work is reset in the same visit and added to the ticket, so no brick is left rocking beside a new one.

Clearances when a rebuild opens the wall

A full firebox rebuild can expose the framing around the fireplace. Section R1001.11 requires wood beams, joists, studs and other combustibles to stay at least 2 inches from the front faces and sides of a masonry fireplace and 4 inches from the back faces.

When a rebuild opens the masonry far enough to see those distances, we check them and write down what we found. Framing closer than the code allows goes on the estimate as a separate item, since it has to be corrected before the fireplace is used again. A lining repair alone does not open the wall that far.

Checked in Julington Creek Plantation before any brick comes out

Old patches and bag mortar removed from repaired joints
Paint cleaned off wherever new mortar has to bond
Back wall slope and throat height kept on any rebuild
Water marks traced to their source and listed separately

Before the first fire after a repair

Do you do firebox rebuilds as well as repairs?

Yes, where the backing masonry itself has failed as well as the firebrick. The rebuild keeps the code's wall thickness, the firebox depth and the throat height, and the estimate explains why a rebuild is needed.

What if the damper or smoke chamber needs work too?

Those go on the estimate as separate lines with their own prices. You can do them with the firebox repair or schedule them later.