Throat damper replacement in Julington Creek Plantation

A seized or warped damper in Julington Creek Plantation freed, rehung or replaced by local family damper pros, after a free inspection.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Family-owned damper experts serving Julington Creek Plantation

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The repair is not finished until the plate opens fully and closes flat with you watching.

Free inspection and estimateYour Julington Creek Plantation damper is run through its full travel and checked with a light at no charge.
100% satisfaction guaranteedIf the repaired damper does not open fully and close flat, we come back and make it right.
Family owned and operatedA family business does the diagnosis and the repair, so the person who quoted it answers for it.

Call (904) 920-5495 Free Inspection

Measuring for a replacement plate

A replacement plate is not ordered by guesswork. The frame opening, the pivot style, the position of the handle lug and the depth of the throat all decide whether a plate will fit and swing freely.

We take those measurements on the inspection, and they go on the estimate with the part. For some older frames no matching plate is made any more, and then the choice is a new frame or a top seal. You hear that before anything is ordered. Want a damper plate measured at your house in Julington Creek Plantation? Call (904) 920-5495 and book a free visit from our damper team.

Julington Creek Plantation is in St. Johns County. Julington Creek Plantation lies inland.

Plate, frame, pivots and control

Poker rods and notch brackets renewed
Rust scale cleared from the seat the plate closes on
Cracked or rusted-out frames cut out and replaced
Damper checked at your Julington Creek Plantation home with the fireplace cold

Call (904) 920-5495 Free Inspection

How our damper pros fix a damper in Julington Creek Plantation

Handle and plate tested
With the fireplace cold, the control is worked through its travel and the plate checked from below with a light.
Failed part named
Pivots, plate, frame or control, the part that failed is written down with the repair options and prices.
Freed, rehung or replaced
Sound parts are cleaned and freed, a plate is matched to its frame, or a new damper is set at code height.
Travel and seal confirmed
The plate must open fully and close flat under the light before the job is done.

Storm season and dampers in Julington Creek Plantation

Hurricane season, June 1 to November 30, reaches inland too. A cap blown off in a storm leaves the damper open to rain until someone notices.

If the handle in your Julington Creek Plantation fireplace turns stiff or rust flakes appear after a storm, look up from the ground for a missing cap, then call us.

10% off any service booked within 72 hours of inspection

Damper work booked within the 72 hours is discounted, and it does not have to be your first job.

Call (904) 920-5495 Free Inspection

Checking a plate for warp

A warped plate is the reason many dampers leak. Heat from an unusually hot fire, or from years of fires, can bow the plate so it touches the seat at two corners and gaps in the middle, or rocks from side to side.

We check it two ways. A straightedge across the plate shows the bow directly. A light held below the closed damper in a dark room shows every gap along the seat. Minor bowing that still leaves a close seal can be lived with. A plate that rocks, or shows a gap you can see from the room, is replaced to fit the frame it sits in.

Cutting out a rusted damper frame

When a damper frame has rusted into the masonry, it cannot simply be lifted out. The frame is set in mortar at the top of the firebox, and freeing it means cutting it into pieces and removing the firebrick or masonry that locks it in place.

The new damper is set level at the required height, with its control positioned to reach the room. Disturbed firebrick is relaid in refractory mortar, and the mortar is allowed to cure for the time its maker states before the first fire. The estimate for this job shows how much masonry the swap disturbs, because that is what sets its size.

Adding a damper where none remains

An empty throat can take a new throat damper when there is enough sound masonry to set a frame and the opening is a shape a stock damper fits. The frame is bedded in refractory mortar at the height the code asks for, and a control is brought out to the room.

When the throat is too irregular, too narrow or too damaged to set a frame, a top-mounted damper closes the chimney without touching the throat. Either way, the fireplace gains a way to close the flue between fires. We price whichever the throat allows, and both when both fit.

What we measure on dampers in Julington Creek Plantation

Full travel measured, with where the plate stops and why
Rain entry above the damper, with a flue cap priced separately
Handle positions marked so open and closed are clear
Whether the fireplace can be used while a part is ordered

Before a damper part is ordered

Can I still use my fireplace with a broken damper?

Only if the plate is secured fully open. A plate stuck closed or partly closed can push smoke back at you, so leave the fireplace cold until it is fixed.

What does the damper visit in Julington Creek Plantation cost me?

The inspection is free, and the repair is priced in writing before any work. Book the damper job within 72 hours of that inspection and 10% comes off as well.