Hearth repair in Julington Creek Plantation, from the base up

We sound every tile on your Julington Creek Plantation hearth, measure the extension and write the fix down before any work. Free inspection.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Hearth experts who measure before they tile

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The room is covered and the dust stays inside the work area.

Free inspection and estimateYour hearth in Julington Creek Plantation is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

Brick hearth units that rock

Brick laid flat as a hearth surface sits in joints that take foot traffic, heat and cleaning. When the joints crumble, the units loosen one by one, and a rocking brick at the front edge is the first to crack. Resetting a loose unit lasts only if the bed below it is sound.

We lift the loose brick on your Julington Creek Plantation hearth, clean the bed down to firm mortar and relay each unit on a full bed with joints struck to match. The ticket lists how many units moved and what we found under them. Call (904) 920-5495 to book the free look.

Julington Creek Plantation lies within St. Johns County. Julington Creek Plantation is inland.

From loose tile to a new slab

Hollow tiles found by sound and reset
Sunken or tilted extensions leveled on new support
Crumbling grout raked out and renewed
Ash dump frames and lids reset or replaced

Call (904) 920-5495 Free Inspection

Sound, measure, rebed, cure

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Support and settling under a hearth in Julington Creek Plantation

Away from the coast in Julington Creek Plantation, a hearth's trouble starts with its support and with heat. A slab that settles, or a setting bed that shrinks away from the tile, shows up as cracks and hollow sounds.

We sound and level the hearth first, so the estimate for your home in Julington Creek Plantation fixes the cause as well as the surface.

10% off any service booked within 72 hours of inspection

Tile, stone or slab, hearth repair in Julington Creek Plantation comes 10% off.

Call (904) 920-5495 Free Inspection

Sounding tile for lost bond

A hollow tile has lost contact with its bed, fully or in part. Tapping with a hard, light tool across the surface finds it by sound before it cracks. We mark each hollow unit and note whether the hollow spots cluster, since a cluster along one line can follow a crack in the slab below.

Scattered hollow tiles on a sound slab are reset one by one. A large hollow area, or hollow tile over a moving slab, is a bed or slab problem, and patching single tiles there buys little time. The count of hollow tiles is written on the estimate so the price follows the real extent of the damage.

Setting materials chosen for the heat

The strip of extension near the opening can get hot during a long fire, while the far edge stays at room temperature. Setting mortars, grouts and sealants each list their limits on their data sheets, and a product that is fine on a bathroom floor may not be rated for the zone closest to the fire.

We choose the setting material and grout from their data sheets for the heat they will see, and write the product names on the ticket. Inside the firebox, where the fire sits, the floor is firebrick in refractory mortar rather than tile products, which keeps each material inside its limits.

Steel in the slab and the concrete over it

Hearths and extensions are built reinforced. Reinforcement helps only while it stays sound, and it stays sound while enough concrete covers it and water stays out. Thin cover near the top surface lets moisture reach the steel, and the rust that forms pushes the concrete off in flakes and pieces.

A patch over rusted steel fails from underneath, so the steel is exposed and cleaned or the slab is recast. We check cover depth where a crack lets us see it and write the finding down. A slab we pour gets its reinforcement placed with concrete cover on every side.

Tile, slab, support and size, in writing

Hearth and extension measured against the opening size and R1001.10
Grout raked and renewed, product and color written down
Flooring or trim inside the clear zone cut back, installer named
Ash dump frame reset in refractory mortar and lid fit checked

Hearth repair questions from Julington Creek Plantation

Do you replace only the cracked tiles or the whole hearth?

Only the cracked ones when the slab under them is sound and the tile can be matched. If the slab has moved or the extension is too small, we explain why a bigger repair makes sense and price both.

Can my hearth be made bigger without tearing it out?

It can when the existing slab is sound. An addition on proper support, joined cleanly to the old slab, brings the size up, and new tile across both hides the seam. The estimate shows the new outline.