Local chimney liner installation for Jacksonville Beach homes

Relining for your Jacksonville Beach house that starts with a free inspection of a clean, proved flue and ends with a top plate and a cap.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Chimney liner specialists who prove the flue first

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Insulation goes on wherever the listing calls for it, and we tell you why when it does.

Free inspection and estimateWe sweep and measure the flue in Jacksonville Beach at no charge before any liner is ordered.
Upfront pricing, no hidden feesLiner size, alloy, insulation and cap are one written price, set before the order goes in.
Workmanship warrantyHow we install the liner is covered by our workmanship warranty, and the maker's terms come in writing.

Call (904) 920-5495 Free Inspection

Relining an outside-wall chimney

A chimney on an outside wall is exposed on three faces, and the gases inside cool quickly. That makes condensation and creosote more likely, and it is where liner makers point to insulation as worth its space even when the listing does not demand it.

An insulated liner keeps the flue warmer from bottom to top, helps the draft start faster, and cuts the moisture that settles on the walls. On each Jacksonville Beach house, we say whether insulation is required by the listing or recommended for the exposure, two different reasons that are worth keeping apart. Where space inside the old tile is tight, insulation is weighed against the liner size the appliance needs. Call (904) 920-5495 and a liner specialist will measure your Jacksonville Beach flue for free.

Jacksonville Beach sits in Duval County. At the 2020 Census, Jacksonville Beach was home to 23,830 people.

Chimney liner work we take on in Jacksonville Beach

Liner diameter taken from the collar or the opening
Round liner pressed oval where the tile is narrow
Insulating blanket or poured mix where the listing asks
Crown under the top plate checked on your Jacksonville Beach chimney

Call (904) 920-5495 Free Inspection

From proof run to capped liner in Jacksonville Beach

Sweep and prove the flue
The flue is swept clean, then a test piece or cone is lowered to make sure the liner will pass every bend.
Size and alloy chosen
The diameter comes from the appliance collar or the fireplace opening, and the alloy from the fuel.
Liner run down and joined
The liner goes down with its insulation where the listing asks, and joins the stove, insert or smoke chamber below.
Top plate, cap and record
The top plate is clamped and sealed, the cap fastened, and you get the installation record.

Crowns around liners on coastal chimneys

A top plate seals to the crown, so a crown cracked by years of coastal weather lets water into the masonry around the new liner.

Before relining in Jacksonville Beach, we check the crown, and any repair it needs is written as its own line.

10% off any service booked within 72 hours of inspection

Cracked flue tile? Book the relining in the 72 hours after we inspect and save 10%.

Call (904) 920-5495 Free Inspection

Joining a liner to a fireplace insert

An insert sits inside the fireplace with its flue collar pointing up into the smoke chamber. A stove adapter from the liner maker fits onto that collar and clamps to the bottom of the liner, giving a sealed connection from insert to cap.

Where the collar and the flue do not line up, a listed elbow at 30, 45 or 90 degrees carries the liner across. The insert's own manual sets any extra rules for its connection, and those come first. The damper frame may need to be cut back to let the liner through, which is listed as its own step. The insert is then set back in place and its surround refitted.

What the top plate does

The top plate is the part that holds the liner up. It sits on the crown around the flue opening, clamps the liner, and carries the whole weight of the liner below it, anchored to the masonry by sealant rated for heat or by masonry screws, per the kit.

Once the plate is fastened, the liner is cut flush with its collar and the cap goes on. A plate set on an uneven or cracked crown will not seal or sit square, which is why a broken top tile gets trimmed and the crown surface made good before it goes on.

Breaking out tile that is in the way

When the old tile leaves too little room for the liner and its insulation, or pieces have shifted into the passage, the tile has to come out. It is broken from the top down with tools lowered on a rope or rods, and the pieces drop to the smoke chamber, where they are removed by hand.

The work is slow and noisy, and the room below is sealed off while it happens. Breaking out tile opens the flue to its full masonry size, which then becomes the space the liner and insulation have to fill. Tile removal is priced as its own line.

Size, alloy and listing on paper

Stainless alloy picked from the listing for the fuel being burned
Wall thimble checked for fit and clearance where the connector enters
Crown repair under the top plate, priced as a separate item
Maker's instructions and the installation record left with you

Relining questions from Jacksonville Beach

Can you reline a chimney that has bends in it?

Yes, with flexible liner, which follows offsets that rigid sections cannot. The flue is proved first to make sure the liner and any insulation will pass the bends.

What paperwork do I get after relining?

The liner maker's instructions and an installation record with the liner size, alloy, length and insulation. Keep them with the house papers for the next sweep, inspection or sale.