Local chimney sweep for Jacksonville Beach homes

Your Jacksonville Beach sweep sized to your flue, square heads for clay tile and soft bristles for stainless. Add a free inspection anytime.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local sweep experts for Jacksonville Beach fireplaces

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The smoke chamber and shelf are cleaned by hand, which is where much of the smell comes from.

No hidden feesThe sweep price for your Jacksonville Beach fireplace is set before the brush goes in, and it stays that way.
Same-day serviceA sweep can happen the same day you call, whenever the schedule has an opening.
100% satisfaction guaranteedIf the room is not left as clean as we found it, we come back and clean it.

Call (904) 920-5495 Free Inspection

Why a sweep is not an inspection

A sweep cleans, and it looks at what the cleaning exposes. It does not measure clearances to framing, trace the chimney through the attic in full, or check every flue against the appliance it serves. Those belong to an inspection, the yearly check NFPA 211 sets.

The two fit well together: sweep first so the tile is clean, then inspect while the drop cloths are still down. If you book only the sweep, the note still flags anything obvious and notes what was outside its scope. Booking both for the same Jacksonville Beach visit means one setup and one cleanup. Our sweep pros are a call away at (904) 920-5495, with a free inspection whenever you want one.

Jacksonville Beach sits on the coastline. Jacksonville Beach is in Duval County.

Flue, shelf, damper and cap, swept

Fireplace opening sealed around the vacuum hose
Smoke chamber walls scraped by hand
Smoke shelf cleared of soot, leaves and twigs
Written record of what the brushes found in Jacksonville Beach

Call (904) 920-5495 Free Inspection

How our sweep pros clean a chimney in Jacksonville Beach

Room covered, flue checked
The hearth is covered, the opening sealed around the vacuum, and the flue checked for nests or animals.
Flue brushed to its shape
A head cut to your tile or liner is run the full height, and the smoke chamber is scraped by hand.
Shelf, damper and cap cleaned
The smoke shelf is cleared, the damper made to seat, and the cap screen brushed from the roof.
Bagged out and written up
Soot leaves in tied bags, and you get a record of what came out and anything we saw.

Damper and cap rust near the ocean in Jacksonville Beach

With the shoreline inside Jacksonville Beach, salt air settles on the metal at both ends of a flue. Cap screens and damper plates rust sooner here, and rust flakes mix with the soot on the smoke shelf.

During a sweep in Jacksonville Beach we clean both parts, work the damper through its full travel and note any rust that has eaten into the plate or the mesh.

10% off any service booked within 72 hours of inspection

Smoky fire or a sooty smell? Save 10% on a sweep booked up to 72 hours after the inspection.

Call (904) 920-5495 Free Inspection

Choosing a brush for the installed liner

Stainless chimney systems do not all have identical cleaning instructions. The brush material and diameter must suit the installed product and remove deposits without scratching or damaging its lining. The manufacturer's manual is the starting point.

Access, rods and debris removal follow that system's layout and instructions. The sweep records visible damage for further assessment instead of treating one brush material as suitable for every stainless liner.

The point where a brush stops working

Glazed creosote is a hard, shiny coat fused to the flue wall, formed after cool, smoky fires have run for a long time. A brush slides over it. Pushing harder does not help and can chip tile.

At that point the sweep stops and names what it found: where the glaze starts and how far up it runs. Removing it calls for rotary tools or chemical treatment over one or more visits, planned as its own job. Until then the fireplace is best left cold, since glaze is dense fuel sitting right in the flue. The record also says whether the glaze sits low near the smoke chamber or high in the flue, since that shapes how it is removed.

Tile joints seen through a clean flue

A clean flue shows its joints. Where mortar has washed out between tiles, a dark line or a gap appears, and heat and gases reach the brick behind through it. A sweep cannot measure the whole run, but it sees the joints near the top and bottom and any the brush catches on.

Those are recorded with their rough location. An open tile joint does not mean relining by default. It means the flue needs a closer look, and the record says whether that look should come before the next fire. Joints near the smoke chamber and at the top of the flue take the most heat and weather, so those are checked first.