Chimney flue resurfacing and repair in Jacksonville Beach

Your Jacksonville Beach flue gets its cracks and open joints closed without shrinking it below what the fireplace needs.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Flue specialists who map before they repair

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Resurfacing systems are named with their listing, and installed by their instructions.

Free inspection and estimateThe flue at your Jacksonville Beach home is swept, examined from both ends and mapped at no charge.
100% satisfaction guaranteedIf the repaired flue is not sound and correctly sized when we finish, we make it right.
Family owned and operatedA family business maps the flue and does the repair, so the plan and the work stay in one set of hands.

Call (904) 920-5495 Free Inspection

Tile faces flaking from the inside

A clay tile can lose its inner face in thin flakes without cracking through. Heat, moisture and flue gases work at the surface, and the flakes collect on the smoke shelf as a gritty layer.

A flaking face thins the tile and roughens the flue, which catches more deposits. Where the damage is shallow, a listed resurfacing system can rebuild the face. Where tiles have thinned through, the flue needs relining. Gritty flakes on your smoke shelf in Jacksonville Beach? Phone (904) 920-5495 for a free flue inspection by our local crew.

Jacksonville Beach lies on the coastline. Jacksonville Beach falls within Duval County.

Tile, joint, seal and size

Flue swept, then examined from both ends
Cracked and gapped sections coated with a listed resurfacing system
Seal around the top tile remade
Loose mortar ridges knocked back inside the flue

Call (904) 920-5495 Free Inspection

How chimney flue repair runs

Swept and examined
The flue is cleaned, then looked over from the roof and the firebox with a light and mirrors.
Mapped and measured
Each defect is placed by height and wall, and the flue size is checked against what it serves.
Repaired by the chosen method
Top tiles swapped from the roof, damaged sections coated with a listed system, or a relining price when repair will not hold.
Checked and cured
The finished flue is examined from both ends and left to cure before the first fire.

Keeping a coastal flue dry after repair

On a coastal chimney, the joint where the top tile passes through the concrete takes rain from every direction, and it has to shed that water without cracking.

In Jacksonville Beach we remake that seal with every top tile job and check it again at the yearly inspection.

10% off any service booked within 72 hours of inspection

Flue repair earns the 10% off even if you have booked with us before.

Call (904) 920-5495 Free Inspection

Flue size against the fireplace opening

For fireplace flues, the code offers a quick rule. A round flue needs a net area of at least 1/12 of the fireplace opening, a square one at least 1/10 (R1003.15.1). A second method uses a chart that also takes chimney height into account.

We measure both the flue and the opening before any repair that adds material inside the flue. Resurfacing adds thickness to every wall, and on a flue already near the limit that can tip it below the minimum. When the numbers are close, tile replacement or relining with a correctly sized liner is priced instead, with the measurements shown.

Acidic condensate and washed-out joints

Gas flue gases carry water vapor. In a flue too large or too cold for the appliance, that vapor condenses on the tile, and the condensate is mildly acidic. Over time it can soften refractory mortar and leave joints open or sandy.

Joints damaged that way are often worst lower in the flue and near the connector, where the gases are coolest. Repairing them without changing the conditions invites the same wear. So when a flue serves a gas appliance, the repair is paired with a look at whether the flue is sized to the appliance, and relining with a suitable liner is priced when it is not.

One flue, several defects, one plan

Single faults are rare in a flue. A sweep might spot one crack while an open joint two tiles lower and a gap at the smoke chamber go unmentioned. Repairing them one at a time, with different methods, can cost more than one repair that covers them all.

So the plan is drawn for the whole flue. Each defect is listed, but the method is chosen to cover them together, whether that is resurfacing the full height, replacing the top two tiles and resurfacing below, or relining. The estimate shows how each defect is covered by the chosen method.

What goes on the flue map in Jacksonville Beach

Dividers between neighboring flues checked where they can be seen
Gaps at the smoke chamber and at the top end of the lining
Water entry at the cap and bond break priced alongside
Fireplace or appliance use allowed before and after the repair

Before a flue repair is chosen

Is flue repair cheaper than relining?

When the damage suits a repair, it is usually the smaller job. When it does not, stacking repairs on a failing flue costs more in the end, and we price relining instead so you can compare.

When can I light a fire again once the flue is fixed?

After the mortar or resurfacing coat has cured for the time its maker specifies. The estimate gives that time, and we confirm the flue is clear before you light the first fire.