Wood-burning fireplace inserts installed in Green Cove Springs
A wood stove insert in Green Cove Springs connected to a stainless liner sized to its collar, with the damper locked open or removed.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Wood insert experts for Green Cove Springs homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The old damper is fixed open or taken out, so the liner cannot be pinched later.
- Free inspection and estimateYour Green Cove Springs firebox, chimney height and hearth are measured against the insert's manual at no charge, before anything is ordered.
- Upfront pricing, no hidden feesEvery part of the job is priced before ordering, from repairs to the rain cap, and nothing is added without your yes.
- 100% satisfaction guaranteedIf the insert smokes or draws poorly after installation to its manual, we come back and set it right.
Sealing the surround, or not
Surround panels frame the insert and cover the gap to the fireplace face, and it seems natural to seal them tight. Whether that is right depends on where the insert takes its combustion air, and the manual of each model answers it.
We follow the manual of your model on this point, since getting it wrong can starve the fire or let room air into the chimney cavity. How it was set is written down for later visits. Questions about the surround on an insert in Green Cove Springs? Ask an insert specialist at (904) 920-5495.
At the 2020 Census, Green Cove Springs was home to 9,786 people. Green Cove Springs sits away from the coastline.
Insert installation for Green Cove Springs fireplaces
- Surrounds sealed or left open per the manual
- Older unlined inserts reconnected to a liner
- Blower outlets planned with an electrician
- Model, liner and clearances recorded for your Green Cove Springs house
From tape measure to first fire in Green Cove Springs
-
Measure against the manual
Firebox, chimney height, hearth and clearances are checked against the insert's table before ordering.
-
Repair and clean first
Fireplace repairs are made and cured, and the flue is cleaned before the liner goes up.
-
Liner, plate and cap
A listed stainless liner runs to the top, closed with a top plate and a rain cap.
-
Set, seal and fire
The insert and surround go in as the manual directs, and the first fire is run with you.
A second flue on the chimney in Green Cove Springs
Some chimneys in Green Cove Springs carry more than one flue. An insert needs one of its own, not shared with another appliance.
We trace each flue before choosing the liner path.
10% off any service booked within 72 hours of inspection
The insert, the liner and the labor are all discounted.
A flue for the insert alone
Each wood insert needs its own flue. One insert maker states plainly that the unit must not be connected to a chimney flue serving another appliance, since two appliances on one flue can push smoke or exhaust into each other.
When a chimney holds more than one flue, we trace each one to see what it serves before choosing the path for the liner. If the one available flue is already shared, the insert waits until that is resolved, and the estimate says what it would take to free a flue for the insert. Nothing is connected until the route is clear.
When the surround is sealed to the face
Sealing the surround panels to the fireplace face is not automatic. One maker seals them when the insert draws its air from outdoors, and leaves them unsealed when it draws room air, so enough air reaches the fire through the fireplace cavity.
For a factory-built fireplace, the same maker requires the surround or the damper area around the liner to be sealed so room air does not enter the chimney cavity. We follow the manual of your model and your fireplace type rather than a habit, and the ticket notes how the surround was set so a later service visit leaves it the same way.
The baffle above the fire
Inside the top of a wood insert sits a baffle, a plate with insulation that holds the flames and gases in the firebox longer. One maker says not to operate the insert with the baffle or its insulation removed.
The same maker prefers removing the insert and pipe to clean and inspect, taking out the baffle only when that is not possible. We set the insert up so the baffle and connection can be reached, and show you the baffle's position so it is not left out after cleaning. A missing baffle shows as a fire that roars up the flue.
Fireplace, flue and hearth on paper first
- The four firebox dimensions set beside the insert maker's size table
- Chimney height, measured the way the insert manual measures it
- Mantel, side facing and side wall clearances measured to the label
- Surround sealed or left open as the manual directs for the air source
Wood insert questions from Green Cove Springs
Do I need a full liner for an insert?
Insert manuals allow a full liner or, where they permit it, a short positive connection. The full liner drafts better and is easier to clean, and it is what we recommend and price first.
Will the insert need electricity?
Only for a blower, if the model has one. It plugs into a grounded outlet, and an electrician adds one where none is within reach.
More services in Green Cove Springs
-
-
-
-
-
-
Learn more about wood-burning fireplace insert installationAll services in Green Cove Springs
A wood insert that fits your Green Cove Springs fireplace
A local insert specialist checks the fireplace, flue and hearth in Green Cove Springs and writes the full price down.
Free Inspection