Local chimney chase cover replacement in Garden City
A new chase top for your Garden City home, built from our roof measurements and the fireplace maker's drawing. Measuring is free.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chase cover experts Garden City families can reach directly
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Rotted plates found under chase tops in Garden City are shown to you and priced on their own line before anyone touches them.
- Free inspection and estimateWe measure your Garden City chase and look under the old top at no charge before anything is quoted.
- Upfront pricing, no hidden feesMetal, gauge and any framing repair each get their own priced line, and that total is what you pay.
- Workmanship warrantyThe new top, its collars and its fasteners are covered by our workmanship warranty, written on the estimate.
Buying a house with a factory-built fireplace
A home inspection report may note rust on a chase top, stains on the siding below it, or a cover that holds water. Those notes do not say what the fix involves.
On each visit in Garden City we confirm the fireplace model, look at the cover, the storm collar and the cap, and check the top of the framing if the cover can be lifted safely. The written estimate separates the cover from any framing or cap work, so buyer and seller can see exactly which items stand behind the inspector's short note. It also records the fireplace model, which the next owner will want. Seeing rust streaks down the chase in Garden City? We come out and measure it once you call (904) 920-5495.
Garden City is a neighborhood inside Jacksonville city limits. The county for Garden City is Duval County.
Your chase top job, part by part
- Chase measured over the finished siding on your Garden City roof
- New top pitched or cross-broken so rain runs to the edges
- Raised collar formed at every pipe hole
- Storm collar refitted and sealed where the maker's steps say
From tape measure to hose test in Garden City
-
Measure over the siding
We measure all four sides at the top of your Garden City chase, over the siding and trim, and check the diagonals so the skirt fits snug.
-
Read the fireplace drawing
The maker's manual for your model sets the collar height, the open gap at the pipe and the minimum slope, and the new top is drawn to it.
-
Shape, collar and fasten
The top is cross-broken or pitched away from each pipe, collared at every hole and screwed through the skirt into the framing. The storm collar goes back on and is sealed where the manual says.
-
Hose test and walk-through
Where the roof gives safe footing, we run water over the finished top and watch it leave every edge, then show you what changed.
Painted chase covers for Garden City homes
Away from the beaches, some Garden City owners want the chase top to match the roof or trim, and painted or powder-coated sheet can do that. The finish protects the metal only until a fold or a ladder scratches it.
So the metal and gauge are picked for the job first, and the color is chosen with you afterward.
10% off any service booked within 72 hours of inspection
Mention the discount when you call, and it shows as its own line on the chase cover estimate.
Cross-breaks, the creases that move water
Cross-breaks are shallow creases pressed into the sheet from corner to corner, forming a low X. They do two things. They stiffen a flat panel so it does not sag between its edges, and they give the surface four gentle slopes that fall from the center toward the sides.
On a chase top that means water runs away from the pipe collar and off the drip instead of pooling. Cross-breaks suit tops with the pipe near the center. When the pipe sits off to one side, a top with a fabricated pitch can do the same job more evenly, and we say which shape we will build and why.
Why thin sheet dents and holds puddles
Sheet metal is sold by gauge, and a higher gauge number means a thinner sheet. A thin sheet is easy to cut and bend, but it flexes under a ladder foot, dents when a branch falls on it, and sags between its edges on a wide chase. Every dent becomes a small basin. Manuals give a minimum gauge, which is where a design starts rather than where it has to stop. For a larger chase, or one that sees foot traffic during chimney service, we propose a heavier sheet so the slope and cross-breaks keep their shape, and the gauge is named beside the metal.
Laying out a top for two pipes
When two pipes share a chase, the top needs two holes, two collars and a layout that lets water flow around both. Each pipe's center is measured from two fixed sides of the chase, because the old cover's holes may be off. The slope or cross-breaks are arranged so neither collar sits in a low spot between them. Spacing between the terminations themselves also matters, since smoke from one outlet can spill into another that sits too close. The fireplace manuals give that spacing, some as a minimum distance and a height difference, and we compare the pair on your roof against the numbers for your models.
Checks behind a chase cover price
- Metal, grade and gauge of the new top, stated in writing
- Skirt depth and drip detail for the wall finish on your chase
- Storm collar replaced or refitted, sealed where the manual specifies
- Pipe spacing and layout where more than one vent passes through
Chase cover questions from Garden City
Do you replace chase covers in Garden City?
We do. Tell us what you see on the chase top, such as rust, a puddle or a lifted edge, and we measure your Garden City chase on the first visit.
Why not just seal around the pipe?
Filling that ring ties a hot pipe to the sheet metal, and the manuals leave it open for that reason. Rain is kept out by the storm collar above the ring, which is sealed to the pipe itself.
More services in Garden City
-
-
-
-
-
-
Learn more about chimney chase cover replacementAll services in Garden City
New chase cover, measured on site
Get a written price for your Garden City chase top from a local specialist before anything is cut. Book the free visit by phone or with the form.
Free Inspection