Chimney mortar repair for homes in Fernandina Beach

Mortar repair for Fernandina Beach chimneys by a local crew that protects your roof and cleans up every crumb.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Masons who survey every face first

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Roofs are covered and gutters cleared, so the only trace left is sound mortar.

Free inspection and estimateEvery face of your Fernandina Beach chimney is scratch-tested and sketched at no charge.
100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.

Call (904) 920-5495 Free Inspection

Staining after an earlier repointing

A chimney repointed carelessly can end up with gray haze and mortar smears across the brick faces. Mortar left to harden on brick is hard to remove without damaging the surface.

Clean work depends on timing: excess mortar is brushed off once it has firmed but before it sets hard. We keep the faces clean as we go, and where old haze is present, we test a small area before any cleaning. Mortar smears on the brick of your chimney in Fernandina Beach? Phone (904) 920-5495 for a free look from our masons.

Fernandina Beach is in Nassau County. Fernandina Beach had 13,052 residents at the 2020 Census.

Repointing work we do in Fernandina Beach

Joints tooled to match and shed water
Fresh work shaded, misted and covered from rain
Brick faces brushed clean as we go
Joints on your Fernandina Beach chimney priced face by face

Call (904) 920-5495 Free Inspection

How chimney tuckpointing runs

Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.

Timing repointing on the coast

Fresh mortar needs a few calm days to cure without rain washing it out. On the coast, we plan repointing around the forecast and cover the work when showers come in.

In Fernandina Beach that sometimes means a pause mid-job, which the estimate allows for.

10% off any service booked within 72 hours of inspection

Our masons take 10% off repointing booked in the three days after they survey the joints.

Call (904) 920-5495 Free Inspection

What white deposits say about the joints

Efflorescence is the white crust salts leave when water carries them to the surface of masonry and evaporates. It appears on brick and joints wherever water is moving through the wall.

It tells us water is present, not where it entered. Open joints are one source, and so are the chimney top and the roof line. We brush a patch clean to see the joints beneath and follow the pattern of deposits to the likely entry points. The crust itself is cleaned off after the water is stopped, since cleaning it earlier only lets it return.

Stair-step cracks mean movement, not wear

Zigzag cracking that steps through the joints usually means the masonry has moved: a footing settled, the chimney shifted or something pushed against it. Repointing that crack fills it, but it does not stop the movement.

When we see a stair-step crack, the cause gets checked before any tuckpointing is priced. A stable chimney with an old crack may need nothing more than repointing. If it is still moving, the structure is dealt with first, and the quote shows the two jobs on separate lines.

Full joints against wind-driven rain

On chimneys close to the ocean, storm wind drives rain hard against the masonry, and any gap along a joint edge becomes a way in. Brick Industry Association guidance on water penetration stresses full mortar joints and tooled profiles for exactly that kind of exposure.

So near the coast we pay particular attention to filling joints completely, with no voids behind the face, and to tooling them tight against the brick. We also check the faces that take the most direct weather, since wind-driven rain wears their joints soonest. Joints on those faces are raked and refilled with extra care at the brick edges, where rain finds its way in first.

What goes on a repointing sketch in Fernandina Beach

Head joints cut by hand, and where a grinder is used
Loose top courses that need relaying rather than repointing
Chimney top and roof metal defects priced as separate lines
Joint profile to match, tooled once the mortar has firmed

Before the joints are raked

How close will the new mortar color be?

A sample batch is mixed, cured beside your brick and checked in daylight before any joint is filled. New joints can still look slightly fresher at first, and we show you the sample so you know what to expect.

What does the repointing survey in Fernandina Beach cost?

The survey and estimate are free. Book the repointing within 72 hours of the survey and 10% comes off.