Local chimney repair for Fernandina Beach homes

What must be done now and what can wait are kept apart, line by line, when we inspect a chimney in Fernandina Beach for free.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local chimney repair experts for Fernandina Beach homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Our Fernandina Beach estimates keep the work that must happen now apart from the work that can wait.

Family owned and operatedThe family business that inspects your Fernandina Beach chimney is the one that repairs it and answers for it.
No hidden feesEach repair line carries its own price, and nothing gets added once the work is under way.
Workmanship warrantyEvery finished repair line is covered by our workmanship warranty, and the estimate names those lines.

Call (904) 920-5495 Free Inspection

Several problems on one chimney

A chimney that has leaked for a while tends to carry several faults together: an open crown, a rusted damper, soft mortar in the top courses. Fixing them in the wrong order wastes money, because fresh mortar under a leaking crown just gets soaked again.

Any Fernandina Beach repair list like that is grouped by consequence. First comes whatever lets heat or smoke reach the house, then whatever lets water in, then whatever steadies the structure, and last whatever can wait. You can do it all at once or in stages, and the order holds either way. Call (904) 920-5495 with your Fernandina Beach address, and we will find the part that failed.

Fernandina Beach is on the coast. Amelia Island Light lies within Fernandina Beach.

Chimney repair work we take on in Fernandina Beach

Spalled brick cut out and replaced one unit at a time
Roof line flashing rebuilt and set into the brick
Repairs on your Fernandina Beach chimney done from the top down
New mortar matched to the color of the old joints

Call (904) 920-5495 Free Inspection

How our chimney repair pros work in Fernandina Beach

Roof, attic and firebox checked
We look at the chimney from all three places in one visit and note each defect where we find it.
Cause traced before the fix
Stains, cracks and loose brick are followed back to the part that let water or heat through.
Repairs from the top down
Cap and crown come first, then brick and joints, then flashing, using the mortar and metal named on your estimate.
Cleanup and a final walk-around
Debris leaves with us, and we show you each finished repair plus anything worth watching.

Sideways rain on coastal chimneys in Fernandina Beach

Storm wind drives rain into the faces of a chimney and up under the laps of its flashing. On a house in Fernandina Beach, with the ocean close by, that sideways rain is the load we plan the repair around.

Joints are repointed to full depth, flashing laps are set generously, and the crown gets an overhang with a drip groove so water drops clear of the brick.

10% off any service booked within 72 hours of inspection

Chimney repair in Fernandina Beach gets the discount whatever the failed part turns out to be.

Call (904) 920-5495 Free Inspection

A cracked flue tile is a heat problem first

Clay flue tiles are the heat barrier inside a masonry chimney, and the Florida Building Code requires masonry chimneys to be lined. A tile cracked through, or a joint between tiles that has opened, lets hot gases and sparks reach the brick shell behind it, and through that shell any wood framing set too close.

It also lets flue gases leak where they should not be. That is why a cracked tile outranks every other finding, and the fireplace stays cold until it is dealt with. The fix may be replacing a top tile or relining the whole flue, and the liner pages explain that choice.

Chimneys that carry more than one flue

Some chimneys serve a fireplace and a second appliance, or two fireplaces, with a flue for each, and each flue has its own job. Smoke from one flue can be drawn down another when their tops sit at the same height and the wind comes from the wrong side.

The flues also share a crown and often a cap, so a repair on top has to account for all of them. On a multi-flue chimney we check each flue separately, note which appliance or fireplace it serves, and look at the masonry that separates them. Each flue gets its own findings, because one can be sound while its neighbor is not.

Metal chimney parts close to salt water

Near the coast, salt carried on the wind settles on every metal part of a chimney and holds moisture against it. Galvanized caps, chase covers, fasteners and flashing lose their zinc coating faster under that film and start to rust sooner than the same parts further inland.

On chimneys in this band we look closely at cap mesh, cover seams and screw heads, and we specify stainless steel or copper parts with fasteners of a compatible metal, following each maker's guidance on exposure. The Brick Industry Association does not recommend galvanized steel for chimney flashing in any case, and near salt water the reasons add up faster.

What the free repair visit checks in Fernandina Beach

Brick replacement count, with the expected color and size match
Flashing metal and method for the roof covering on your house
Temporary measures marked as temporary, with what later replaces them
Cleanup and debris removal, inside and outside, noted for each line

Before you book a chimney repair

Should I be there for the first repair visit?

For the first visit, yes, at least long enough to walk us through what you have noticed and to open the house for the attic and the fireplace. Outside-only repair days can go ahead without you once the estimate is signed.

Can the repairs be done in stages?

Yes. The estimate can be split into stages, beginning with safety and water entry, then damaged masonry, then wear items. Each stage leaves the chimney better than before, and items that must be done together stay together.