Local chimney sweep for Crawford homes
Chimney cleaning in Crawford that gives the smoke shelf and smoke chamber as much attention as the flue, with free inspections from local pros.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chimney sweeping specialists who keep the room clean
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Soot leaves your Crawford home in tied bags along a covered path, and nothing is shaken out indoors.
- No hidden feesThe sweep price for your Crawford fireplace is set before the brush goes in, and it stays that way.
- Same-day serviceA sweep can happen the same day you call, whenever the schedule has an opening.
- 100% satisfaction guaranteedIf the room is not left as clean as we found it, we come back and clean it.
When your Crawford fireplace smells of old smoke
A sooty smell on cold-fireplace days, when no fire has burned, is a fair reason to book a sweep. Deposit in the smoke chamber and flue gives off that smell when air flows down the chimney, and brushing it out removes the source.
The sweep also shows whether something else is at work. A musty note points to water in the masonry, and a sharp animal smell to something in the flue. The damper seal gets checked on the same visit too, since a plate that no longer closes flat lets room air and chimney air trade places. Choose a sweep day that works in Crawford by calling (904) 920-5495.
Crawford lies within Nassau County. Crawford sits away from the coastline.
Sweeping work we handle in Crawford
- Fireplace opening sealed around the vacuum hose
- Flue checked for nesting animals before any brush goes in
- Smoke shelf cleared of soot, leaves and twigs
- Stainless liners brushed with soft bristles
Cover, brush, clear, write up
-
Room covered, flue checked
The hearth is covered, the opening sealed around the vacuum, and the flue checked for nests or animals.
-
Flue brushed to its shape
A head cut to your tile or liner is run the full height, and the smoke chamber is scraped by hand.
-
Shelf, damper and cap cleaned
The smoke shelf is cleared, the damper made to seat, and the cap screen brushed from the roof.
-
Bagged out and written up
Soot leaves in tied bags, and you get a record of what came out and anything we saw.
Dampers that will not seat in Crawford
Rust and deposit build up on a damper frame until the plate drags or stops short of closed. Room air then leaks up the flue.
A sweep in Crawford scrapes the plate and frame and works the damper until it closes flat, or notes that it needs repair.
10% off any service booked within 72 hours of inspection
In Crawford, a sweep gets the same 10% off as a repair.
Why a round brush fails in a square tile
Clay flue tile comes in square and rectangular shapes, and the corners are where deposit sits deepest, because smoke moves slowest there. A round brush in a square tile cleans a circle and leaves four stripes of creosote running the height of the flue.
The answer is a head cut to the tile's shape and size, with bristles long enough to reach into each corner under light pressure. For rectangular tile the head is matched to both dimensions, so it bears on the long walls as well as the short ones. Heads wear down, and a worn head stops reaching the corners, so each one is checked against the tile before the first pass.
The point where a brush stops working
Glazed creosote is a hard, shiny coat fused to the flue wall, formed after cool, smoky fires have run for a long time. A brush slides over it. Pushing harder does not help and can chip tile.
At that point the sweep stops and names what it found: where the glaze starts and how far up it runs. Removing it calls for rotary tools or chemical treatment over one or more visits, planned as its own job. Until then the fireplace is best left cold, since glaze is dense fuel sitting right in the flue. The record also says whether the glaze sits low near the smoke chamber or high in the flue, since that shapes how it is removed.
Emptying the base of a lined flue
A flue that serves a stove or furnace may end below the connection in a clean-out door or a tee with a removable cap. Everything brushed down collects there. It is opened, emptied into a bag, and its seal checked before it closes again, since a clean-out that leaks lets room air into the flue and throws off the draft.
A base packed with old debris shows the flue has gone a while without a sweep, and the record notes how full it was. A door rusted shut is freed rather than forced, and a warped one goes on the repair list.
What the sweep record notes
- Cap screen cleared of soot and the cap reset square on the flue
- Nesting material and leaves removed once the flue is confirmed empty
- Written record of tile, damper, crown and cap defects seen while cleaning
- Factory-built chimney brushed with the tool its manual names
Sweep questions from Crawford
Will the sweep get rid of the smell?
It removes the deposit that causes a sooty smell. A musty or animal smell has other causes, and the record says which one it looks like.
Do I need to be home for the sweep?
An adult needs to open the house and hear the findings at the end. In between, the work does not need you.
More services in Crawford
-
-
-
-
-
-
Learn more about chimney sweep and chimney cleaningAll services in Crawford
Schedule a sweep for your Crawford fireplace
After the brushing, the written record for your flue in Crawford lists what came out and anything worth fixing.
Free Inspection