Call(904) 920-5495

Local chimney rebuild for Crawford homes

A free inspection tells you if the problem starts at the footing before we price rebuilding the top of your Crawford chimney.

  • Fully licensed and insured
  • Locally owned
  • Family owned and operated
  • Same-day service

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local rebuild experts for Crawford chimneys

  • Locally owned in Jacksonville
  • Family owned and operated
  • 100% satisfaction guaranteed
  • Free inspection and estimate
  • Same-day service available
  • 10% off any service

A rebuild in Crawford goes down only as far as the masonry is loose, and we show you where that line falls.

  • Family owned and operatedOur family business takes your Crawford chimney down by hand and lays it back up itself.
  • Upfront pricing, no hidden feesThe take-down line, flue plan and crown are priced before the first brick comes off.
  • Workmanship warrantyFrom the new courses to the counterflashing, the rebuilt stack carries our workmanship warranty.

A second look at repair or rebuild

Not every tired chimney needs rebuilding. Scattered spalled brick, open joints in a few places and a cracked crown can be repaired piece by piece. Rebuilding earns its place when whole courses have failed together, so that patching would replace most of the stack a piece at a time.

If you have been told the chimney needs rebuilding and want that checked, the estimate visit tests the masonry and says which it is. Either answer comes to you in writing, with the evidence behind it, for the Crawford house. No work is booked at that visit unless you ask for it. The take-down line for your Crawford chimney is set on a free inspection; call (904) 920-5495.

Crawford is in Nassau County. Crawford is an inland community.

What a chimney rebuild covers in Crawford

  • Roof protected where brick and mortar could land
  • Brick lowered by bucket or chute, never thrown
  • Sound original brick cleaned and saved to relay
  • Crown cast with an overhang, drip edge and bond break

How a rebuild in Crawford runs

  1. Courses tested, line marked

    Each course is pressed and probed from the top down, and the take-down line is marked where sound brick starts.

  2. Taken down under cover

    The flue is plugged and the roof protected, then brick comes off by hand and sound units are saved.

  3. Relaid with flue and flashing

    Courses go back plumb in the chosen mortar, the flue tile or liner rises with them, and counterflashing is set into the joints.

  4. Height, crown and cap

    The height is checked, a crown is cast with a drip edge and bond break, and the cap goes on after it cures.

Footings under leaning chimneys in Crawford

A chimney sits on its own footing of concrete or solid masonry. When the whole stack leans from the base, rebuilding the top will not stop it.

We check whether a lean in Crawford starts at the top courses or at the footing, and we name who would evaluate the footing.

10% off any service booked within 72 hours of inspection

From the roof line up or the whole stack, a rebuild in Crawford earns the discount.

Closing the flue while the stack comes down

The open flue is the easiest path for rubble into the house. Before the first course comes off, a cover or a plug goes into the flue a few feet down, so mortar and brick fragments stop on top of it instead of landing in the smoke chamber or on the damper.

Inside, the fireplace opening is sealed as a second barrier. The cover is lifted and cleaned out as the take-down goes lower, and it stays in place until the new flue work begins. A cover that fills with debris is emptied by hand rather than pushed down the flue.

Choosing a mortar type from ASTM C270

ASTM C270 sorts mortar for unit masonry into types by the mix of cement, lime and sand, or by tested strength. The stronger types are stiffer, and a mortar stiffer than the brick around it pushes movement into the brick instead of taking it in the joint.

The Brick Industry Association's guidance is to pick the lowest-strength type that still meets the job's needs. For a chimney top that means matching the mortar to the brick and the exposure instead of reaching for the strongest bag. The type chosen is named before work starts. Color is matched separately through the sand and any pigment, since the type sets strength and the sand sets the shade.

Water repellent on rebuilt masonry

Fresh masonry can take a water repellent once it has cured, and the product's data sheet says how long to wait. A breathable, penetrating repellent lets moisture inside the brick escape as vapor while slowing rain from soaking in, which film-forming coatings do not.

Repellent is not a substitute for a good crown, tight flashing and tooled joints; it works on top of them. Whether it is worth applying depends on the brick and the exposure, so it is offered as an option, with the reasoning. It goes on clean, dry masonry, and the data sheet gives the reapplication interval.

Tested before a rebuild is priced in Crawford

  1. Flue covered so brick and mortar chips stay out of the smoke chamber
  2. Joint profile tooled concave or V once the mortar firms
  3. Clearance to framing and fireblocking checked where the stack passes through
  4. Cure time allowed before the cap goes on and the first fire

Before the first brick comes off

Can I use the fireplace while the rebuild is underway?

No. From the day the take-down starts until the crown has cured and the cap is back, the flue stays covered and the opening sealed. The estimate gives the date it can be used again.

Does a rebuild qualify for the 10% offer?

Yes. A rebuild booked within 72 hours of the free inspection comes 10% off; just ask for it on the call.

Test your Crawford chimney course by course

Family-owned masonry professionals mark the take-down line on your Crawford chimney at no charge.

Free Inspection

Call the chimney and fireplace experts

(904) 920-5495

Free inspection and written estimate

Call (904) 920-5495