Call(904) 920-5495

Family-run gas log installation in Clay Hill

Your Clay Hill gas log set priced part by part, with the gas line named for the gas trade and no hidden fees.

  • Fully licensed and insured
  • Locally owned
  • Family owned and operated
  • Same-day service

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Gas log pros who measure first in Clay Hill

  • Locally owned in Jacksonville
  • Family owned and operated
  • 100% satisfaction guaranteed
  • Free inspection and estimate
  • Same-day service available
  • 10% off any service

Every log is set to the manual's photos, so the flame stays clean.

  • Free inspection and estimateYour Clay Hill firebox, flue, damper and room are measured against the set's manual at no charge before anything is bought.
  • Upfront pricing, no hidden feesSet, burner, clamp, cleaning and any repairs are priced in writing, with the gas trade's part named.
  • 100% satisfaction guaranteedIf the flame is sooty or the set will not stay lit after our installation to the manual, we come back.

When the logs shut off

A gas log set that goes out while running has a short list of suspects: gas pressure, logs out of place, a dirty flue or damper, a firebox too small for the burner and debris on the burner itself. Most of those can be ruled in or out on a single visit.

Each gets checked in turn, starting with the pressure while every gas appliance in the house is running. Gas logs that keep going out in Clay Hill? Call (904) 920-5495.

Clay Hill lies within Clay County. Clay Hill sits away from the coastline.

Gas log work for Clay Hill fireplaces

  • Vented log sets with permanent damper clamps
  • Inlet pressure read with other appliances running
  • Glass doors checked for airflow and opening size
  • Room size worked out before vent-free logs go into homes in Clay Hill

From wood fireplace to gas logs in Clay Hill

  1. Measure firebox and room

    Firebox, chimney height and, for vent-free sets, the room are checked against the manual.

  2. Clean and clamp

    Soot and debris come out of the fireplace, and vented sets get their permanent damper clamp.

  3. Connect and test

    Once gas reaches the valve, the set is connected, leak tested and its pressure read.

  4. Place logs and light

    Logs and embers go where the manual shows, and we light the set with you.

An old wood fireplace inland in Clay Hill

An old fireplace in Clay Hill that burned wood for years needs cleaning before gas logs go in, and sometimes repair.

Both come first on the estimate.

10% off any service booked within 72 hours of inspection

Burner and logs together, a gas log set in Clay Hill is 10% off.

The gas on the rating plate

Each log set is built for one fuel, and its rating plate names it. One vented burner's manual states that it is not field convertible for use with other gases, and says not to install it if the house's gas differs from the plate.

Some vent-free sets are built to run on either gas, shipped set for propane and converted to natural gas by the installer following the maker's instructions. We read the plate before installation and make sure the set matches the gas at the house, since a mismatch is not something to adjust around.

Logs placed to the manual's photos

Every piece in a log set has a place. Manuals show the layout in photos or drawings, with locator pins or notches, and one maker allows some freedom in arrangement only as long as noticeable soot does not appear.

The same maker reads a steady build-up of soot on a log as incomplete combustion where flame touches it, and asks for that log to be moved to reduce the contact. We set each log to the manual at installation and show you the layout, and logs are handled only when cool or with heat-resistant gloves. Snapping the finished layout before the first cleaning makes it easy to put back.

Service before the season

One log set maker asks for the appliance to be examined before use and inspected at least annually, to prevent burner shutdown, soot and odors, with the controls, burner, air shutters and air passages kept clean. It suggests more frequent cleaning for propane sets.

The same manual asks for periodic examination and cleaning of the fireplace's venting system. A yearly visit covers the burner and pilot, the logs and media, the damper clamp, the pressure and the flame, and we can schedule it on the day the set goes in. Flames with unusual shapes or slow ignition between visits are a reason to call sooner.

Firebox, room and damper on paper

  1. Chimney height from the hearth to the top for a vented set
  2. Room volume set against the code's vent-free limit
  3. Room use and local rules checked before vent-free is chosen
  4. Supply pipe sized by the gas trade, with inlet pressure read at the valve

Gas log questions from Clay Hill

Can I burn wood with the gas logs in place?

No. The logs and burner are not built for a wood fire, and one vent-free maker bans solid fuel in a fireplace with its set installed.

Do you replace cracked gas logs?

Yes, with the set's own replacement logs placed to the manual. Call (904) 920-5495 with the set's model for your Clay Hill fireplace.

A gas log set that fits your Clay Hill fireplace

A local gas log specialist inspects the damper and chimney in Clay Hill and quotes in writing.

Free Inspection

Call the chimney and fireplace experts

(904) 920-5495

Free inspection and written estimate

Call (904) 920-5495