A top sealing damper fitted to your chimney in Bryceville
Order a top sealing damper for your Bryceville fireplace in the 72 hours after we measure, and a local family business takes 10% off the install.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local pros who fit chimney top dampers in Bryceville
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
You get a walk-through on opening, closing and locking the lid.
- Free inspection and estimateYour flue tile in Bryceville is measured and the crown checked on a free visit before any damper is ordered.
- Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
- 100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.
A top damper that no longer closes
An installed top damper that will not close tight has a stretched or frayed cable, a bracket that has slipped, a gasket that has hardened or a lid knocked out of line. Each has its own fix, and none requires a new damper. A lid that closes most of the way still lets air and rain through the gap.
We check the lid, hinge, spring and gasket on your chimney in Bryceville, adjust the cable and bracket, and replace worn parts with the maker's kit where one exists. The ticket lists each part.
Bryceville is in Nassau County. Bryceville lies inland.
What our crew fits and fixes at the flue top in Bryceville
- Cracked tile rims repaired before fitting
- Round flues fitted with matching models
- Bent lids straightened or replaced
- Your Bryceville chimney's tile and crown checked first
The order of a top damper install
-
Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
-
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
-
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
-
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.
Animals and idle flues in Bryceville
An idle flue in Bryceville is shelter for birds and animals whatever the distance to the beach. A closed top damper takes that shelter away.
Anything already in the flue has to be out before the damper goes on.
10% off any service booked within 72 hours of inspection
Two quotes for a top damper? You have 72 hours to compare them and still take 10% off.
Setting the frame in its adhesive
Top damper frames are set on the tile in a high-temperature adhesive supplied with the damper. One maker's instructions call for a continuous 1/4 inch bead of the furnished adhesive and a 24 hour set before the damper is used.
We follow the instructions for the model we fit, clean the tile rim first and press the frame down evenly so the bead is continuous. The cure time goes on the ticket, and the fireplace stays unlit until it has passed. Adhesive squeezed out along the joint is tooled into a neat fillet so water runs off rather than sitting against the frame.
The lid as a rain cover
When the damper is open, its lid stands above the flue and sheds rain much as a cap does. When it is closed, rain stays out altogether. On a single fireplace flue, that can make a separate rain cap unnecessary.
Where a spark screen is wanted around the flue, or other flues on the chimney need covering, a cap may still be part of the plan. The estimate explains which top fittings your chimney needs and why. Either way, the flue top stays covered from above, open or closed.
The walk-through after installation
Before we leave, we show you how the handle opens and closes the lid, how to lock it closed, and how to confirm it is open before lighting. You try it yourself while we watch.
We also write down the make and model, the flue size and the maker's care points, so anyone who works on the chimney later knows what is up there. If anyone else in the house uses the fireplace, it helps to have them watch the walk-through as well.
What we check before fitting a top damper in Bryceville
- Tile rim and crown checked, with any repair priced first
- Lid adjusted to close evenly on its gasket
- Every flue identified, with the damper on a fireplace flue only
- Walk-through on opening, closing and locking the lid
Before the damper is ordered
Do I still need a chimney cap?
On a single fireplace flue, the open lid sheds rain like a cap, so one may not be needed. Other flues, or a wish for a spark screen, can still call for one, and we explain it on the estimate.
What does measuring for a top damper in Bryceville cost?
Nothing. Measuring the tile and checking the crown and throat are free, and the written estimate names the model and price.
More services in Bryceville
-
-
-
-
-
-
Learn more about top-sealing damper installationAll services in Bryceville
Measure, order, set, adjust, done
Repair the old damper or seal the top? Our specialists in Bryceville price both when both make sense.
Free Inspection