Family-owned smoke chamber repair in Brooklyn
Open joints, flaking parge or loose brick in the chamber, fixed by local Brooklyn specialists and backed by our guarantee.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local masons who parge smoke chambers in Brooklyn
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Refractory mortar made for fireplaces goes on the walls, named on your ticket.
- Free inspection and estimateWe look above the damper in your Brooklyn fireplace, measure the chamber and write down what we find at no cost.
- Upfront pricing, no hidden feesCleaning, resets, parging and cure time are priced line by line before the first trowel goes in.
- Family owned and operatedA family-owned local crew does the reaching and troweling through the throat, and cleans up after itself.
Bringing an idle fireplace back into use
Long idle, a fireplace may have a chamber full of fallen mortar, a shelf with debris and a damper rusted in place. None of it matters until the first fire, and then all of it matters at once. Mortar crumbs on the hearth can be the first sign that something above has loosened.
Before that first fire in Brooklyn, we clear and inspect the chamber and shelf, work the damper and check the flue. The written estimate says what must happen before lighting and what can wait. Book the free visit at (904) 920-5495.
Brooklyn is inland. Brooklyn is a neighborhood inside Jacksonville city limits.
From the smoke shelf to the first flue tile
- Smoke shelf cleared and repaired
- Damper frames reset in their bedding
- Out-of-limit chambers rebuilt to shape
- Glaze removed before any new coat
From the first look above the damper to the first fire in Brooklyn
-
Tell us what the fireplace does
Spilling smoke, a stale smell or grit on the damper plate tells us what to bring to the free visit.
-
Chamber measured and mapped
Height, width and wall slopes are measured, and each wall, the shelf and the flue transition are checked.
-
Cleaned, reset, parged
Soot and glaze come off, loose units are reset, joints filled, then refractory mortar goes on in layers.
-
Cured and draft tested
The product cures as its data sheet directs, then a small fire shows how the fireplace draws.
Deposits and the inland fireplace in Brooklyn
How much soot and tar a chamber collects depends on the wood and the fire, not on the distance to the coast. In Brooklyn, dry wood burned hot leaves less in the chamber than damp wood left to smolder.
A smooth chamber helps either way, and we pass on the burning tips that help it stay clean.
10% off any service booked within 72 hours of inspection
Save 10% on smoke chamber work in Brooklyn by booking it in the 72 hours after we inspect.
What the smoke chamber does
A fireplace opening is far wider than the flue above it. The smoke chamber is the funnel that joins them, rising from the throat just above the opening and narrowing until it meets the flue lining. Hot gases speed up as the funnel narrows, which is what carries smoke up rather than out into the room.
A smooth, well-shaped chamber lets that happen with little turbulence. Steps, pockets and loose units break the flow up and cool the gases, and a cool, slow column is what spills at the opening and leaves deposits behind. That is why two fireplaces with the same flue size can draw very differently.
Water reaching the smoke shelf
Rain that gets into the flue runs down the tile and lands on the smoke shelf. A shelf that holds water keeps the damper frame wet and soaks the masonry below the chamber, and wet masonry does not take a parge coat well.
The water source goes on the estimate first, and we look for it at the chimney top first. The shelf is then reshaped to drain toward the firebox, and the chamber is parged once it has dried out. A parge coat laid over wet masonry traps water behind it and can blister.
An undersized flue above a smooth chamber
R1003.15 ties the flue size to the fireplace opening: at least one tenth of the opening area for a square flue, one twelfth for a round one, and one eighth for a rectangular flue at a 2 to 1 ratio or more. A flue smaller than that can spill smoke however smooth the chamber is.
Flue and opening are both measured before chamber work is recommended, so you are not sold a parge coat to fix a sizing problem. The numbers go on the ticket either way. An undersized flue is a finding of its own, and the estimate explains its options, such as changes to the opening or to the flue.
Shape, walls, shelf and product, in writing
- Soot and loose mortar cleaned off to bare, sound masonry
- Smoke shelf cleared, repaired and shaped to drain to the firebox
- Damper frame bedding checked and reset where loose
- Fireplace opening sealed and the room protected throughout
Smoke chamber questions from Brooklyn
How soon can someone look at the smoke chamber in Brooklyn?
When a slot is free that day, yes. Tell us whether the fireplace smokes, smells or drops debris, and we will bring what the visit needs.
Is parging enough, or does the chamber need rebuilding?
Parging is enough when the chamber's height and wall slopes are inside the code limits and the walls are sound. We measure both before recommending either, and the numbers are on the estimate.
More services in Brooklyn
-
-
-
-
-
-
Learn more about smoke chamber repairAll services in Brooklyn
Clean, reset, parge, cure
Tell us whether the fireplace smokes, smells or drops grit when you call (904) 920-5495, and the free visit in Brooklyn goes on the calendar.
Free Inspection