Stone chimney repair in Brentwood by local masons
Cultured stone out of production? Our Brentwood masons find the closest match, sometimes from your own chimney.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local stone masons who match mortar and joints in Brentwood
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Crown, flashing and base drainage are checked on the same visit.
- Free inspection and estimateWhether your Brentwood chimney is full stone or veneer is settled on a free visit, before any price.
- Upfront pricing, no hidden feesStones, joints and veneer area are priced in writing one line at a time.
- Family owned and operatedOur family-owned masons approve the mortar sample with you before the first joint is filled.
A sealer that made the stone look wet
Some sealers form a film on the stone that darkens it and traps moisture behind it. Water that gets in through a joint cannot dry out through the face, and the stone can start to flake under the film. Some sealers also darken the stone permanently, which changes how any repair will match.
If a film sealer has been applied to your chimney in Brentwood, we write down what we see and what removing it would involve. Any water repellent we recommend afterward is a breathable type suited to stone, applied only after repairs.
Brentwood is an inland community. Within Jacksonville city limits, Brentwood is its own named neighborhood.
From one loose stone to a veneer reinstall
- Loose stones reset on fresh mortar beds
- Mortar matched to the stone's color and hardness
- Cracked stones replaced with matched pieces
- Loose adhered veneer taken off and reinstalled
How our masons repair a stone chimney in Brentwood
-
Describe what moved
Tell us what has shifted or fallen, and the free visit comes equipped for it.
-
Build and backing confirmed
Corners, joints and the base show the build, and a loose piece shows what is behind the veneer.
-
Reset, repoint or reinstall
Stones go back on fresh beds, joints fill in layers, and veneer returns to a repaired backing.
-
Matched and cured
An approved mortar sample and the old joint profile guide the finish, and the cure time is written down.
The cap on an inland stone chimney in Brentwood
A stone chimney in Brentwood needs a sloped cap with a drip edge, just like every other masonry chimney. Without one, rain runs over the top courses and into the joints.
Every stone repair includes a look at the top, with crown work priced separately.
10% off any service booked within 72 hours of inspection
Loose stones or open joints? The stone work you book in the next three days comes 10% off.
Getting sealant out of stone joints
Caulk or foam packed into stone joints blocks them from drying and leaves the old mortar behind it wet and soft. It also bonds to the stone edges, so pulling it out can take the edge of a soft stone with it.
We cut sealant out with blades rather than tearing it, then rake the joint to sound mortar and repoint. Sealant stays only where a moving joint needs it, such as between the crown and the flue liner, and the ticket says where. Silicone residue left on stone faces can stop new mortar from bonding, so the edges are cleaned before repointing.
Color matching manufactured stone
Manufactured stone gets its color from pigments in the casting and on the surface, and those colors shift with sun and weather. A new piece from the same line can look brighter than the pieces around it for a long time.
We compare candidate pieces against the chimney in daylight, and where no match exists, move original pieces from a hidden face to the repair and put the new ones out of sight. The ticket records the product line and color used. Touch-up products for manufactured stone exist, and where the maker offers one, it can blend a small repair.
Paint on a stone chimney
Paint traps moisture in stone and joints and peels unevenly as the stone underneath gets wet and dries. Removing it without damaging soft stone takes a stripper suited to the paint and the stone, tested on a hidden patch first.
Some owners prefer to keep the paint and repaint after repairs, and that is a valid choice. We give you both options, write down what each involves, and repoint any joints the paint was hiding before either happens. If the paint stays, the new mortar is allowed to cure fully before any repainting, as the paint maker directs.
What we check on a stone chimney in Brentwood
- Loose stones counted, reset on fresh beds and repointed
- Joints raked to sound mortar and filled in layers
- Crown and flashing findings priced as separate lines
- Cleaning method tested on the stone and named on the ticket
Before a stone is taken out
Do you repair manufactured stone veneer as well as natural stone?
Yes. Manufactured veneer follows its maker's installation guide for the backing and setting mortar, and we match the product line and color as closely as it allows.
What happens if a reset stone in Brentwood works loose?
Our satisfaction guarantee covers the stone work we quote. If a stone we reset works loose or the joints we filled fail, we return and redo them.
More services in Brentwood
-
-
-
-
-
-
Learn more about stone chimney repairAll services in Brentwood
Build first, then the joints
Full stone or veneer, our stone specialists in Brentwood explain the repair the build calls for and write down the price.
Free Inspection