Stuck and rusted dampers fixed in Brentwood

Cooled air escaping up the flue in Brentwood? We get the plate seating tight again, backed by a 100% satisfaction guarantee.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local damper pros for Brentwood fireplaces

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The repair is not finished until the plate opens fully and closes flat with you watching.

Free inspection and estimateYour Brentwood damper is run through its full travel and checked with a light at no charge.
100% satisfaction guaranteedIf the repaired damper does not open fully and close flat, we come back and make it right.
Family owned and operatedA family business does the diagnosis and the repair, so the person who quoted it answers for it.

Call (904) 920-5495 Free Inspection

Repair or replace, laid out in writing

Damper work comes down to three sizes of job. Freeing and cleaning a sound damper is the smallest. Rehanging or replacing the plate in a sound frame is the middle one. Cutting out the frame and setting a new damper is the largest.

The estimate lists which applies to your fireplace, with the reason and the price beside each option we could offer. When a top-mounted seal is the better answer, it is priced as well. Nothing is started until you choose. Want the options priced for your fireplace in Brentwood? Phone (904) 920-5495; the inspection costs nothing.

Brentwood is part of Duval County. Brentwood lies inland.

Plate, frame, pivots and control

Broken handle links and rivets reconnected
Poker rods and notch brackets renewed
New damper set at the height the code asks for
Top seal priced where a throat swap is impractical

Call (904) 920-5495 Free Inspection

How chimney damper replacement runs

Handle and plate tested
With the fireplace cold, the control is worked through its travel and the plate checked from below with a light.
Failed part named
Pivots, plate, frame or control, the part that failed is written down with the repair options and prices.
Freed, rehung or replaced
Sound parts are cleaned and freed, a plate is matched to its frame, or a new damper is set at code height.
Travel and seal confirmed
The plate must open fully and close flat under the light before the job is done.

Fans, fireplaces and dampers in Brentwood

Kitchen hoods and bath fans pull air from the house, and a leaky damper can become the way it comes back in, with a sooty smell along with it.

A damper that seals better in your Brentwood home often cures the smell, and we check the fans while we are there.

10% off any service booked within 72 hours of inspection

The damper visit in Brentwood costs nothing, and a repair booked in the 72 hours after it is 10% off.

Call (904) 920-5495 Free Inspection

Keeping rain off a repaired damper

Rain falling straight down a flue with no cap ends its drop on the damper plate, the lowest metal in its path. A damper that sits wet after every storm rusts at the seat and the pivots first, which is where a damper fails.

So the question after a rust repair is how the water got there. A cap with a screen over the flue stops most of it, and it is priced as a separate line when the chimney has none. Without that, a new plate or a freed damper starts rusting again from the top side, where it cannot be seen from the room.

Adding a damper where none remains

An empty throat can take a new throat damper when there is enough sound masonry to set a frame and the opening is a shape a stock damper fits. The frame is bedded in refractory mortar at the height the code asks for, and a control is brought out to the room.

When the throat is too irregular, too narrow or too damaged to set a frame, a top-mounted damper closes the chimney without touching the throat. Either way, the fireplace gains a way to close the flue between fires. We price whichever the throat allows, and both when both fit.

Opening the damper before the first match

A surprising amount of damper trouble starts with the order of steps. The damper opens fully before any paper or wood is lit, and it is checked by feel or with a light, not assumed from the handle position. A handle can read open while a broken link leaves the plate shut.

After a repair, we show you how your control should feel at each position. A crank has a set number of turns from closed to open. A poker rod sits on its last notch when fully open. Knowing that feel lets you notice a problem early, before a fire exposes it.

What we measure on dampers in Brentwood

Frame condition: cracks, lug wear and how it sits in the masonry
Full travel measured, with where the plate stops and why
Seat cleaned back to metal and the seal checked under a light
Top-sealing damper priced alongside when the throat is hard to reach

Before a damper part is ordered

Why is there a clamp on my damper?

It is probably there for a vented decorative gas appliance, whose instructions require the damper to stay partly open. We leave it while that appliance is installed and remove it only when the fireplace returns to wood.

What does the damper visit in Brentwood cost me?

The inspection is free, and the repair is priced in writing before any work. Book the damper job within 72 hours of that inspection and 10% comes off as well.