Local fireplace repair for Brentwood homes

Each repair on a fireplace in Brentwood follows a free inspection and upfront pricing, with no hidden fees.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Fireplace repair pros for Brentwood homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Factory-built units are repaired with the maker's parts, so they stay within their listing.

Locally ownedA locally owned business shows you the failing part of your Brentwood fireplace before any price.
Upfront pricing, no hidden feesSafety repairs come first on the estimate, and items that can wait are priced on their own lines.
100% satisfaction guaranteedIf the fireplace still smokes or sticks after the repair we quoted for it, we come back.

Call (904) 920-5495 Free Inspection

Rust flakes on the grate

Flakes of rust on the grate or the hearth come from somewhere above the opening. On a masonry fireplace that is the damper plate or its frame, or the steel lintel that carries the brick over the opening. On a factory-built unit it can be the damper blade or the inner wall of the firebox itself. Each is steel giving way to moisture or heat. For a fireplace in Brentwood, we find the source, judge how much sound metal is left, and write down whether the part can be cleaned and treated or has to be replaced. Fireplace acting up in Brentwood? Call (904) 920-5495 and tell us what you see.

Within Jacksonville city limits, Brentwood is its own named neighborhood. Brentwood is part of Duval County.

Fireplace repairs for Brentwood homes

Masonry or factory-built settled before any part is named
Damper plate, pivot and handle worked and repaired
Smoke problems traced with a test fire
Rough smoke chamber parged smooth

Call (904) 920-5495 Free Inspection

How our fireplace pros repair a fireplace in Brentwood

Type and rating plate read
We settle whether the fireplace is masonry or factory-built and read the model where there is one.
Joints, damper and hearth checked
Joints are probed, the damper worked through its travel, and the hearth and trim measured.
Repair with the right materials
Refractory mortar and firebrick for masonry, the maker's parts for factory-built units.
Test fire and cleanup
Where smoke was the problem, a short test fire checks the fix, and the room is cleaned before we go.

Factory-built fireplaces in Brentwood

A factory-built fireplace lines its firebox with refractory panels instead of firebrick. Fine cracks are normal; a panel broken through to the steel is not.

For factory-built units in Brentwood, we read the rating plate and order panels by model.

10% off any service booked within 72 hours of inspection

Smoke, damper or firebox, whatever is wrong with your Brentwood fireplace, the repair is 10% off.

Call (904) 920-5495 Free Inspection

Refractory mortar and the bag-mortar mistake

The mortar in a firebox is not the mortar in a brick wall. ASTM C199 covers refractory mortars, and the code calls for the medium-duty grade between firebricks. Ordinary masonry mortar is made to handle weather rather than a fire burning against it hour after hour, and a firebox patched with it breaks down again under the heat. Premixed fireplace patch in a tube has a place for hairline gaps where its maker says so, but a joint that has washed out needs to be raked and refilled. When we open a firebox that has been patched before, the wrong material comes out before the right one goes in.

When the house pulls against the fireplace

A fire needs air, and in a tight house with a range hood, bath fans or a clothes dryer running, the fireplace can become the easiest path for outside air to come in. Smoke then comes down instead of going up. The code's answer is an exterior air supply to the fireplace, unless mechanical ventilation keeps the room at neutral or positive pressure.

On a repair visit we test it directly: a fire lit with every exhaust fan off, then with them on, and then with a window open. The difference between the three tells us whether the fireplace or the house is the problem.

Loose tile at the front edge of the hearth

The front edge of the hearth extension takes the heat of the fire and the traffic of the room, and tile there can loosen when the adhesive under it was not meant for the heat. A hollow sound when you tap the tile is the sign. The repair lifts the loose pieces, removes the old adhesive down to a clean noncombustible base, and resets the tile in a setting material rated for the temperature at that spot. Matching an older tile can be the hard part, so you know whether we are resetting your original pieces or need replacements.

Tested in Brentwood before a fireplace repair is priced

Cracked or loose firebrick cut out and replaced, counted brick by brick
Test fire with the damper open, and the smoke path noted
Smoke guard sized to lower an opening that is too tall
Spark screen checked for gaps and replaced with the listed part

Before the firebox is opened up

Is refractory mortar really different from regular mortar?

Yes. Refractory mortar is made to take firebox heat, and the code calls for the medium-duty grade under ASTM C199 between firebricks. Regular masonry mortar breaks down when a fire burns against it.

Will you tell me if the fireplace is unsafe to use?

Yes, in writing. Faults such as an open firebox joint, a panel broken through to the steel or a damper that will not open go at the top of the estimate with a note to leave the fireplace unused until they are fixed.