Firebrick and joint repair in Tallulah-North Shore

Your Tallulah-North Shore firebox repointed or rebricked to the Florida code, with the mortar's cure date on the ticket before we leave.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local firebox pros who price wall by wall

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

We read the standard on every bag and tub before it goes into a firebox joint.

Free inspection and estimateEvery wall of the firebox in Tallulah-North Shore is tapped and probed cold, and the failed bricks and joints are marked at no charge.
Upfront pricing, no hidden feesEach wall is quoted for what it needs, a few joints, a few bricks or a full reline, so a small repair stays small.
100% satisfaction guaranteedIf a joint we repointed opens again after it has cured and been used as the ticket says, we come back and redo it.

Call (904) 920-5495 Free Inspection

Repoint, replace or reline

Firebox repair comes in three sizes, and the estimate says which one each wall needs. Open joints in otherwise sound brick are repointed. Bricks cracked through or worn thin are replaced one at a time. A wall worn across its whole face, or pulling away from the masonry behind, is relined.

Each wall is priced on its own line, so a sound side wall is not rebuilt because the back wall failed, and you can see the size of each job before choosing. Not sure how big a job your Tallulah-North Shore firebox is? Local specialists check it free at (904) 920-5495.

Tallulah-North Shore sits in Duval County. Tallulah-North Shore sits away from the coastline.

Firebox work for Tallulah-North Shore fireplaces

Cracked firebrick replaced to size, one brick at a time
Back walls relined when patching will not hold
A written cure date for your Tallulah-North Shore fireplace
Each wall of your Tallulah-North Shore firebox priced on its own line

Call (904) 920-5495 Free Inspection

From a cold firebox to the first fire in Tallulah-North Shore

Keep the firebox cold
Let the fireplace go unused for several hours ahead of our visit, so each wall is cool to the touch.
Tap, probe and mark
Each brick is sounded, each joint probed, and the failed ones marked and written up by wall.
Rake, rebrick or reline
Joints are raked and repointed, failed bricks replaced and worn walls relined in C199 mortar.
Cure date on the ticket
The mortar maker's drying time sets the date of the first small fire, written down before we leave.

Firebox checks before a sale in Tallulah-North Shore

In Tallulah-North Shore, as anywhere, a buyer's inspector will look into the firebox. Open joints and cracked bricks become report items that slow a sale.

A written firebox repair with the materials named answers those items before they come up.

10% off any service booked within 72 hours of inspection

A firebox repair in Tallulah-North Shore booked the same day we inspect it is discounted too.

Call (904) 920-5495 Free Inspection

Hydraulic and air-setting refractory mortars

Refractory mortars do not all harden the same way. A hydraulic refractory mortar sets and cures much like a portland cement mortar and, according to one maker, becomes water insoluble once cured. Premixed air-setting products harden as they dry, and some finish curing only when heat is applied.

Neither type is wrong in itself, but each follows its own data sheet for joint size, mixing, drying and first heat, and the two are not mixed in one joint. We choose by the joint width and the kind of repair, and the product name goes on the ticket so the next person to work on the firebox knows what is in the wall.

Relining without making the firebox too shallow

For a conventional masonry fireplace, the Florida code sets a minimum firebox depth of 20 inches. A new lining laid in front of an old one takes that depth away, so a reline is not a matter of simply adding brick to the face.

Before writing a relining, we measure the depth from the opening to the back wall and work out what the new lining would leave. Where the old lining has to come out first to keep the depth, the estimate says so and prices the removal as its own step. A shallower firebox also pushes the fire closer to the room, which is one more reason to keep the depth.

Rebuilding the wall under a damper frame

The top of the sloped back wall often carries the damper frame, and R1001.7.1 requires that damper to be ferrous metal, at least 8 inches higher than the top of the opening. The Brick Industry Association advises bedding a damper in spots of mortar rather than mortaring its ends solid, with a noncombustible fibrous material at the ends so the metal can move.

When a back wall is rebuilt under an existing damper, the frame is supported through the work and reset that way. A damper that needs repair itself is written up as a separate damper item on the estimate.

Walls, joints and cure time in writing

Each firebox wall and the floor tapped, probed and marked in chalk
Joint widths checked against the quarter-inch limit in R1001.5
Paint cleaned off wherever new mortar has to bond
Smoke chamber, damper and hearth items kept on their own lines

Firebox repair questions from Tallulah-North Shore

Is refractory caulk good enough for firebox joints?

Not for every joint. Florida's code wants firebrick laid in C199 medium-duty refractory mortar, with joints kept to a quarter inch. We read the product's stated standard and joint range before using it.

Will new firebrick match the old color?

Close, though not exact. Firebrick color varies by maker and batch, and the old lining has darkened with use, so new bricks look lighter at first. We tell you before ordering.